Danfoss CG150-2 CAN Data sheet

Data Sheet

Gateway Interface Communicator

CG150-2 CAN/USB

The Danfoss CG150-2 CAN Interface is an element of
the PLUS+1® family of mobile machine management
products. The CG150-2 provides a compact and cost
effective gateway interface between PLUS+1
Compliant modules on the PLUS+1® Controller Area
Network (CAN) and a personal computer (PC) USB
port.

The CG150-2 communicator provides the application
download of programs to PLUS+1® Compliant devices
on the PLUS+1® CAN network and upload/download
of application tuning parameters.

Device drivers are imbedded in the PLUS+1® GUIDE
(Graphical User Integrated Development
Environment) service and diagnostic tool software.

The CG150-2 is compatible with Bosch CAN standard

2.0 A & B (standard and extended data frames) and
USB standard 2.0 (Hi-speed).

®

Features

•

USB powered

•

Supports CAN bit rates up to 1000 kb
per second

•

CAN messages are time-stamped in 100
ms increments

•

Supports both 11-bit (CAN 2.0A) and 29­bit (CAN 2.0B) identifiers

•

Supports data and remote frames

•

Equipped with 110 cm [44 in] length
USB cable and 30 cm [12 in] length CAN
cable

•

Interface the CAN bus with 9-pin D-SUB
connector

•

Designed for USB 2.0 (Hi-speed)

•

Microsoft Windows XP®; 7; and 8
platforms

•

Plug and Play installation

•

CAN bus monitor software available at:

http://powersolutions.danfoss.com/
products/PLUS-1-GUIDE/PLUS-1­software-tools/

Comprehensive technical literature online
at powersolutions.danfoss.com

©

Danfoss | Jul 2016 L1412468 | AI00000190en-US0102 | 1

Technical data

Pin 2 Pin 3

Pin 7

Dimensions 35 x 165 x 17 mm
Power supply USB
Current consumption (approximately) 90 mA@5V
Operating temperature range 0° C – 70° C [32° F – 158° F]
Storage temperature range -40° C – 85° C [-40° F – 185° F]
USB version 2.0 (Hi-speed)
Clock accuracy 100 μs
LED indicators 2
Bit rate (kb/sec) 40 – 1000 Kbits/sec
CAN physical layer High speed (ISO 11898-2)
Galvanic Isolation Yes
Clock syncronization of multiple

devices
Maximum message rates

msgs/sec
Time stamp (bits) 32
Error counters reading No
Mix 11/29 bit messages Yes
Error frame detection Yes
Error frame generation No
Silent mode No
Sound indicator No
CAN connector 9-pin male D-SUB
USB cable length 110 cm [44 in]
CAN cable length 30 cm [12 in]
Auto transmit buffers No
Auto response buffers No
Load dump protection Yes
Polyurethane cabling Yes

No

8000

Ordering Information

Status Light

CAN pin configuration

9-pin male connector, front-side view

Pin Function

1 ­2 CAN –
3 Shield/ Ground
4 ­5 ­6 ­7 CAN +
8 ­9 -

CG150-2 CAN/USB Gateway Interface Communicator Part Number 11153051

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products
already on order provided that such alterations can be made without changes being necessary in specifications already agreed.
All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.

2 | © Danfoss | Jul 2016 L1412468 | AI00000190en-US0102