The C62(L)-CX & H62(L)-CX are condensers with
asymmetric design optimized for use in
R410A/R32 chillers and heat pumps with
capacities of 20-110 kW. The innovative Micro
Plate technology and the asymmetric channel
geometries, with dierent designs on the
refrigerant and water sides, improve heat
transfer, reduce the amount of material used
and minimize pressure losses on the water side.
To meet demands for higher seasonal
eciency, the C62(L)-CX & H62(L)-CX is
designed to work eciently and increase
comfort in modern buildings without
increasing the carbon footprint. Helping watercooled chillers perform more eciently, it
reduces both energy consumption and
environmental impact. The low hold-up volume
reduces the system refrigerant charge and
oers valuable savings.
Micro plate heat exchanger, type C62L-CX & H62L-CX
Portfolio overview
H62L-CX: High eciency condenser optimized for R410A, and other high-density refrigerants, heat pump
application
H62-CX: High eciency condenser for medium density refrigerants, heat pump application
C62L-CX: High eciency condenser optimized for R410A, and other high-density refrigerants, chiller application
C62-CX: High eciency condenser for medium density refrigerants, chiller application
Table 1: Designation
Application
The C62(L)-CX & H62(L)-CX are condensers applicable in dierent applications like heat pump and chiller systems.
The C62(L)-CX & H62(L)-CX can operate also in evaporating mode and or de-frost mode, so it can be applicable in
reversable systems.
Media
Refrigerants
R410A, R452B, R454B, R32, R407C, R290
For other refrigerants please contact your Danfoss Sales representative.
Micro plate heat exchanger, type C62L-CX & H62L-CX
Conguration ow
Figure 2: Congurationow
Parallel ow:
Q1 - Q2 [H1 - H2]: brine/secondary side
Q3 - Q4 [H3 - H4]: refrigerant/primary side
Hold up volume
Q1 - Q2 (l): 0.092 x N/2 [l]
Q3 - Q4 (l): 0.07 x (N-2)/2 [l]
N: Number of Plate
Ordering
Global or local standard code numbers can be accessed via Store.Danfoss.com on local subsites, with full set of
technical data as well as relevant assets such as documentation and drawings. Since the portfolio may contain
dierent types depending on country, this document contains only a summarized list of standard code numbers
with a few data relevant for the product selection.
Conguring and calculating products
The C62(L)-CX & H62(L)-CX can be easily customized based on the application needs; model size can be evaluated
using Hexact software
For details, product conguration and code creation please contact your Danfoss Sales representative
Mechanical connections
Table 3: Mechanical connections
Accessories and spare parts
MPHE products are not serviceable, i.e. cannot be taken apart and repaired, and there are no spare parts program.
As for accessories, stud bolts, feet on front and/or back cover plates for mounting support and handling are
available upon request.
Micro plate heat exchanger, type C62L-CX & H62L-CX
Table 4: Stud bolts
Contact your Danfoss sales representative for further information.
Certicates, declarations, and approvals
The list contains all certicates, declarations, and approvals for this product type. Individual code number may have
some or all of these approvals, and certain local approvals may not appear on the list.
Some approvals may change over time. You can check the most current status at danfoss.com or contact your local
Danfoss representative if you have any questions.
Third party approvals
All MPHE and BPHE are certied to European Pressure Equipment Directive (PED) and are approved by Underwriters
Laboratories (UL).
Table 5: Third party approvals
Other certications are available upon request: Kraia, EAC, UA, AS; for others and more details please contact your
local Danfoss representative.
Danfoss oers a wide range of support along with our products, including digital product information, software,
mobile apps, and expert guidance. See the possibilities below.
The Danfoss Product Store
The Danfoss Product Store is your one-stop shop for everything product related—no matter where
you are in the world or what area of the cooling industry you work in. Get quick access to essential
information like product specs, code numbers, technical documentation, certications, accessories,
and more.
Start browsing at store.danfoss.com.
Find technical documentation
Find the technical documentation you need to get your project up and running. Get direct access to
our ocial collection of data sheets, certicates and declarations, manuals and guides, 3D models
and drawings, case stories, brochures, and much more.
Start searching now at www.danfoss.com/en/service-and-support/documentation.
Danfoss Learning
Danfoss Learning is a free online learning platform. It features courses and materials specically
designed to help engineers, installers, service technicians, and wholesalers better understand the
products, applications, industry topics, and trends that will help you do your job better.
Create your Danfoss Learning account for free at www.danfoss.com/en/service-and-support/learning.
Get local information and support
Local Danfoss websites are the main sources for help and information about our company and
products. Find product availability, get the latest regional news, or connect with a nearby expert—all
in your own language.
Find your local Danfoss website here: www.danfoss.com/en/choose-region.
Hexact for heat exchangers
Hexact for heat exchangers helps you identify the best heat exchanger for your chiller, heat pump, or
other application based on operating conditions. Works for innovative MPHE and traditional BPHE
brazed heat exchangers.
Download Hexact for free at hexact.danfoss.com
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its
products without notice. This also applies to products already on order provided that such alterations can be made without subsequential
changes being necessary in specications already agreed. All trademarks in this material are property of the respective companies. Danfoss and
the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.