Danfoss C62-E Data sheet

Data sheet

Micro Plate Heat Exchanger

For increased chiller prots

C62-E Evaporator

20%

charge compared with
a traditional BPHE. The
ideal solution to meet
the world`s climate
and energy aspirations.

ra.danfoss.com

C62-E Evaporator
Micro Plate Heat Exchanger

Introduction

Key features

Q4 Q1

Q4 Q1

525

470

Q3 Q2

Q3 Q2

63

118

The C62-E is an evaporator optimised for R407C for use in high-eciency chillers with capacities of 20-90 kW. The heat exchanger features
innovative Micro Plate technology that improves heat transfer and reduces the amount of material used.

To meet demands for higher seasonal eciency, the C62-E is designed to work eciently and increase comfort in modern buildings without
increasing the carbon footprint. Helping chillers perform more eciently, it reduces both energy costs and environmental impact.

The low hold-up volume reduces the system refrigerant charge and oers valuable savings.

• Minimal hold-up volume: Less refrigerant charge.

• Reduced pressure drop: For more ecient chillers.

• Smaller footprint: Enabling more compact chillers.

• Reduced CO2 footprint: Environmentally friendly with high heat transfer and minimal refrigerant charge.

11.5+1.72 x n 29

H1 H4

H1 H4

H2 H3

H2 H3

Technical data

n = number of plates

Standard
materials

Standard
connections

Third part
approvals

Accessories
– stud bolts

Accessibility

Corresponding
condensers

Min. working temperature: -196°C
Max. working temperature: 200°C
Max. working pressure: 30 bar
Hold-up volume: Q1-Q2/ Q3-Q4 (l): 0.081×n/2 / 0.081×(n-2)/2
Weight (kg): 2.92+0.145×n Max. no. of plates: 200

Cover plates: AISI 304
Connections: AISI 304

Other material combinations are available on request. Please contact your Danfoss sales representative for more information.

Standard connections as per below are optimised for this product as condenser in chiller system. For other connections, please contact your
Danfoss representative.

Q3 (Refrigerant inlet): soldering 3/8”, 1/2”, 5/8”, 3/4” or 7/8”
Q4 (Refrigerant outlet): soldering 1/2”, 3/4”, 7/8”, 1 1/8” or 1 3/8”
Q1-Q2 (Water side): External threaded G 1 1/4”

Europe: Pressure Equipment Directive (PED). America: Underwriters Laboratory Inc (UL). The third party approvals stated are standard for all our
products. For details of other existing approvals or to discuss how we can meet your local needs, please contact your Danfoss representative.

Stud bolts on front and/or back cover plates for mounting support are available upon request. Contact your Danfoss sales representative
for further information.

We will help you set up a logistics solution that will meet your needs.

A corresponding Micro Plate heat exchanger for condenser duties (C62-C) is also available.

Plates: AISI 316
Brazing ller: Pure copper

DKQB.PD.310.K4.02 © Copyright Danfoss RC-MDP | sw | 08 2014