Danfoss BB, BE, BF, BG, BN Data sheet

Data Sheet

Solenoid coil Type BB, BE, BF, BG and BN

The Clip-on coils are available for the entire range of Danfoss solenoid valves

The coils are specially designed to operate in the aggressive environment of high humidity and temperature uctuations that you nd in most refrigeration systems.

The Clip-on fastening system ensures a faultless installation and makes the coils easy to mount and dismount. A Danfoss Clip-on coil can be mounted without any tools at all, and it is simple to dismount the coil by means of a screwdriver.

The Clip-on coils are available for the entire range of Danfoss solenoid valves for refrigeration, freezing and air conditioning purposes.

Features

• Encapsulated coils with long operating life, even under extreme conditions.

• Standard coils for AC or DC.

• Standard coils available with 3-core cable, terminal box or DIN plugs.

• Standard coils from 12 V to 420 V, 50, 60 or 50/60 Hz.

• Standard coils dimensioned for max. opening dierential pressure (MOPD) of up to 38 bar.

• Coils can be tted without the use of tools.

AI237186440089en-000802

Data

Solenoid coil type

1m 3-core

cable

Terminal box

DIN spade

and

protection

cap

DIN spade

1m 3-core

cable

Terminal

box

DIN spade

and

protection

cap

DIN spade

Terminal box IP67

BFBEBGBGBEBBBFBEBEBBBN

Enclosure

IP67

IP20

IP00

IP67

IP20

IP00

IP67

Polution degree

44443344333

Conductor area [mm2]

0.75

0.75 - 1.5

0.75

0.75 - 1.5

Cable size [mm]

Ø6.6

Ø6.0 - Ø11

Ø6.6

Ø6.0 - Ø11

Rated impulse voltage [kV], if altitude < 4000 m

44444444444

Humidity [R.H.]

0 − 100%

0 − 97%

non-condensation condition

0 − 97%

non-condensation condition

0 − 100%

0 − 97%

non-condensation condition

0 − 97%

non-condensation condition

0 − 100%

Type of control

11111111111

Safety clas-

sication

Class I

Max. altitude above sea level [m]

4000

Solenoid coil, Type BB, BE, BF, BG, and BN

Product specication

Technical data

Table 1: Solenoid coil type

 NOTE:

For DIN plug, impulse withstand voltage is 3.1 kV for 2000 m < Altitude < 4000 m

Connection

3-core cable

The external thread in the screwed cable entry suits exible steel hose or corresponding cable protection (3 x 0.75 mm2).

Terminal box

Leads are connected to terminal screws in the terminal box. The box is tted with a Pg 13.5 screwed entry for 6 - 14 mm cable. Max. lead cross section: 2.5 mm2.

DIN plugs

The three pins on the coil can be tted with spade tabs, 6.3 mm wide (to EN175301-803A). The two current carrying pins can also be tted with spade tabs, 4.8 mm wide. Max. lead cross section: 1.5 mm2. Use of the protective cap supplied will prevent inadvertent contact with live parts.

DIN socket

(to EN175301-803A) Leads are connected in the socket. The socket is tted with a Pg 11 screwed entry for 6 - 12 mm.

94

Danfoss M18F03

45

57

47

71

57

45

46

86

51

45

57

47

28

110

45

57

68

Solenoid coil, Type BB, BE, BF, BG, and BN

Dimension and weight

Figure 1: Terminal box 10 W , Weight 0.29 Kg

Figure 2: Cable 10 W , Weight 0.29 Kg

Figure 3: DIN socket 10 W , Weight 0.24 Kg

Figure 4: Terminal box 12 - 20 W , Weight 0.55 Kg