Danfoss BasicRail Data sheet

Data Sheet

BasicRail

with insulation overlap panels

Application

Ordering

The Basic insulation overlap panels of 20 and
35 mm are 2 m² (1 + 1 m² - folded) and serve as
heat and sound insulation. The surface of the
insulation overlap panels is capable of taking
stress and can be walked on. It forms a suitable
base for the Danfoss BasicRail system and for the
pipe lay-out.
They are easy to install and the strong foil is a
technically ecient base for cement and liquid
screed. To compensate for pipes on the oor and
for deeper insulation a double layer is laid e.g.
with EPS 035 DEO 20 mm.
The grid shown on the insulation foil is 5 cm.

Product Typ e Code no.

Basic Insulation overlap panel, 20 mm FH-IMB 088X0071

BasicRail for 16 x 2 mm pipes, 2 m FH-BRA 088X0040

BasicRail for 20 x 2.25 mm pipes, 3 m FH-BRB 088X0042

Rail clips for BasicRail FH-BRD 088X0043

Basic perimeter insulation, 150 mm, 8 mm FH-BK 088X0065

Technical specications

VDCSE502

Insulation Overlap Panel 35 mm 20 mm

Foil

Insulation (expanded polystyrene) EPS 045 DES 35-3 EPS 045 DES 20-2

Panel size 1000 x 2000 mm, folded 1000 x 2000 mm, folded

Total thickness (dL / dB) 35 mm / 32 mm 20 mm / 18 mm

Thermal conductivity (λ) 0.045 W/mK 0.045 W/mK

Thermal resistance (R) 0.77 m2 K/W 0.44 m2 K/W

Impact sound insulation 29 dB 26 dB

Maximum active load 4 kN/m

0.2 mm,

3 cm aps on two sides

2

0.2 mm,

3 cm aps on two sides

2

4 kN/m

© Danfoss | FHH | 2015.09 | 1

Accessories

Product Typ e Code no.

Basic movement gap strip, 2 m FH-ACA 088X0066

Basic pipe sleeve, 40 cm FH-ACB 088X0067

Note on HBCD

This product contains a substance included on the
candidate list according to article 59 (1,10) of
regulation EC No. 1907/2006 (‘REACH’) in a
concentration above 0.1% w/w: ameproong
agent, hexabromocyclododecane.
HBCD is also present on the Annex 14 list.

Danfoss A/S

Floor Heating Hydronics • Ulvehavevej 61 • DK-7100 Vejle • Denmark • Phone: [phone] • Fax: [phone]
[e-mail] • www.oorheating.danfoss.com

Danfoss ca n accept no respons ibility for pos sible errors in ca talogues, bro chures and other pr inted material. Da nfoss reserves t he right to alter its p roducts with out notice. This als o applies to produ cts
already o n order provided t hat such alteratio ns can be made with out subsequenti al changes being n ecessary in spe cications alr eady agreed.
All trade marks in this mate rial are proper ty of the respec tive companies . Danfoss and the Dan foss logotyp e are trademark s of Danfoss A/S. Al l rights reserv ed.

2 | © Danfoss | Danfoss | FHH | 2015.09

VDCSE502