Data Sheet
BasicGrip Panels
Application
Ordering
Technical Data
The BasicGrip panel consists of a deep drawn PS
foil (polystyrene), which can be walked on. The
knobs are filled with EPS (expanded polystyrene)
and a sandwich construction (hard/soft) serves as
heat and sound insulation.
The servicable area is 1000 x 1000 mm = 1 m².
The knobbed structure allows for exact pipe laying within a 5 cm grid and diagonal laying. A
press button connection allows for a secure seal
of cement or screed.
Product Type Order Number
BasicGrip panel, 35 mm insulation FH-BGA 088X0050
BasicGrip panel, 11 mm insulation FH-BGB 088X0051
BasicGrip panel without insulation FH-BGC 088X0052
BasicGrip Panel with 35 mm insula-
tion
Deep drawn foil, black PS, flaps on two sides, 25 mm
Insulation Expanded polystyrene:
EPS 040 DES 35-2 EPS 035 DEO 11
Servicable area 1000 x 1000 mm
Panel format 1025 x 1025 mm
Knob height 17 mm
Insulation thickness (dL/dB) 35 / 33 mm 11 mm Total thickness 52 mm 28 mm 17 mm
Thermal conductivity 0.040 W/mK 0.035 W/mK Thermal resistance (R) 0.87 m² K/W 0.31 m² K/W Impact sound performance 28 dB none none
Maximum active load 5 kN/m² 50 kN/m² -
with 11 mm insula-
tion
without insulation
-
Accessories
Danfoss Heating Solutions VDCTE402 © Danfoss 11/2012 1
Product Type Order Number
BasicGrip connection, 950 x 100 mm FH-BGD 088X0053
BasicGrip manifold / multi, 0.5 m² with 35 mm insulation FH-BGE 088X0054
BasicGrip manifold / multi, 0.5 m² with 11 mm insulation FH-BGF 088X0055
BasicGrip manifold / multi, 0.2 m², no insulation FH-BGG 088X0056
PE-string, 18 mm FH-BGH 088X0057
Conduit elbow for 16 mm pipe FH-BGP 088X0058
Basic perimeter insulation FH-BK 088X0065
Basic movement gap strip, 2 m FH-ACA 088X0066
Basic pipe sleeve, 40 cm FH-ACB 088X0067
Data Sheet BasicGrip Panels
Note on HBCD
This product contains a substance included on the candidate list according to article 59 (1,10) of regulation
EC No. 1907/2006 ('REACH') in a concentration above 0.1% w/w: flameproofing agent, hexabromocyclododecane. HBCD is also present on the Annex 14 list.
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products
already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed. All trademarks in this material are property of the respective
companies. Danfoss Heating Solutions and the Danfoss Heating Solutions logotype are trademarks of Danfoss A/S. All rights reserved.
2 VDCTE402 © Danfoss 11/2012 Danfoss Heating Solutions