Danfoss AMD 113, AMD 113 AS, AMD 123, AMD 123 AS, AMD 213 AS Data sheet
...
Data sheet
Actuators for dampers (with spring return)
AMD 113, 113 AS, AMD 123, 123 AS
AMD 213, 213 AS, AMD 223, 223 AS
Description AMD actuators are used for the regulation of
air dampers of 90° angle of rotation to be used
in heating, ventilation and air conditioning
applications (HVAC).
Features:
• Manual operation
• Rotation direction selection by switch
• Adjustable rotation angle by mechanical end
stop min 40°.
• Position indication
• Overload protection
• Direct mounting with universal spindle clamp
• Anti-rotation strap for preventing actuator
from rotating
• Maintenance free
Ordering
Note:
* Actuator with built-in auxiliary switches
** D amper size:
damper size:
a
b
S=a×b
S=π×r
r
2
Main Data:
• Nominal voltage (AC or DC):
- 24 V, 50/60 Hz
- 230 V, 50/60 Hz
• Control input signal: modulating or 2-point
(depend on wiring)
• Torque: 3-5 Nm
• Rotation angle: 0- max. 95°
• Running time motor 40…100 s /90°
• Running time spring 20 s /90°
Typ e
AMD 113
AMD 113 AS 24 AC/DC 2 aux. switches * 08 2H11 37
AMD 113 230 AC/ DC - 082H1138
AMD 113 AS 230 AC/ DC 2 aux. switches * 08 2H11 39
AM D 123
AMD 123 AS 24 AC/DC 2 aux. switches * 0 82 H1141
AM D 213
AMD 213 AS 24 AC/DC 2 aux. switches * 0 82H 1143
AM D 213 230 AC/DC - 0 82H 1144
AMD 213 AS 230 AC/DC 2 aux. switches * 08 2H11 45
AMD 223
AMD 223 AS 24 AC/DC 2 aux. switches * 08 2H1147
Torque
(Nm) (s/90°) (V)
Control
signal
2-point
3
modulating
2-point
5
modulating
Speed Supply voltage
24 AC/DC -
40 s motor /
20 s spring
100 s motor /
20 s spring
75 s motor /
20 s spring
100 s motor /
20 s spring
24 AC/DC - 08 2H11 40
24 AC/DC -
24 AC/DC - 08 2H11 46
Auxiliary
switch
Max. da mper size
(m2)
0,6 **
1 **
Code No.
08 2H11 36
08 2H11 42
Working cycles
DEN-SMT/SI
2-point >60.000 cycles (0°-95°-0°)
modulating
VD.IR.B2.02 © Danfoss 03/2015
>60.000 cycles (0°-95°-0°)
>1.000.000 partial cycles (±5°)
1
Data sheet Actuators for dampers AMD 113(AS), 123(AS), 213(AS), 223(AS)
Technical data
Note:
* at distance 1m
Operating mode Valid for: AMD 113, 113AS, 213, 213AS
Typ e
Power supply V 24 AC/DC or 230 AC/DC ± 20%
Power consumption in motion
Power consumption in Stand by
(end p osition)
Frequency Hz 50/60
Control input
Operating torque Nm 3 5 3 5
Rotation angle 0...max 95°
Ambient temperature
Ambient humidity: 5...95% r.F., non- condensating (EN 60730 -1)
Storage and transport temperature
Protection Class III (24V) / II (230V)
Rated impulse voltage: kV 0,8 (EN 60730-1) 4 (EN 60730-1) 0,8 (EN 60730-1) 4 (EN 60730-1)
Grade of enclosure / Degree of protection
Sound power level motor: *
Weight kg 1,2
marking in accordance with standards
Valid for: AMD 123, 123AS, 223, 223AS
Through connecting the power supply to
BU+BN (1+2) and a reference signal Y to BK (3) of
0(2)…10VDC, moves the actuator to its specied
position. The actual damper position 0…100%
is a feedback signal U for example to share the
signal with other actuators. If the power supply is
interrupted the actuator is moving to position 0
113/ 113A S
W
V
mA 0-20 (4-20) Ri = 500Ω
°C
dB(A)
Low voltage directive (LVD) 2006/95/EC: EN 60730-1, EN 60730-2-14
EMC Directive 2004/108/EC: EN 61000-6 -2, EN 61000-6 -3 RoHS CE (2011/65/EU)
113/ 113A S
(24V)
1,5 1,5 1,5 2 1,5 2
(230V)
5 4 / 4,5 5,5 6,5 4,5 6,5
< 45 motor /< 65 spring < 35 motor /< 65 spring
213/213AS
(230V)
2 point modulating
-
213/213AS
−30 … 50
−30 … 80
IP 54
(24V)
123/ 123AS
(24V)
0-10 (2-10) Ri = 100 kΩ
Through connecting the power supply to BU+BN
(1+2), the actuator moves to position 1 while the
pre-tensioned spring is wound up the same time.
If the power supply is interrupted the actuator is
moving back to position 0 by the spring power.
The actuator is still maintaining the minimum
torque at the damper spindle.
by spring power. The actuator is still maintaining
the minimum torque at the damper spindle
The actuator is overload-proof and requires no
end switches. It automatically stops when the
The actuator is overload-proof and requires no
end stop is reached.
end switches. It automatically stops when the
end stop is reached.
223/223AS
(24V)
Auxiliary switches
(Valid for: AM D 113AS, 213AS, 123AS, 223AS)
The two integrated auxiliary switches are
interdependet adjustable (S1: 0°…30° ~ S2:
65°…95°). These are activated corresponding to
the adjusted angle. The damper position can be
checked by the mechanical pointer.
Direct mounting Simple direct mounting on the damper spindle
with a universal spindle clamp, supplied with an
anti-rotation strap to prevent the actuator from
rotating.
Manual operation The actuator can be operated only manually
while the power supply is o. The supplied lever
is to open and lock the damper position. The lock
stays until the power supply is put on.
Mode- switch
(Valid for: AM D 123, 223,123AS, 223AS)
Mode switch with four rast positions at the
housing
- Rotary direction Normal 2-10 V
- Rotary direction Normal 0-10 V
- Rotary direction invers 2-10 V
- Rotary direction invers 0-10 V
2
VD.IR.B2.02 © Danfoss 03/2015
DEN-SMT/SI
Loading...