Danfoss 3232, 4141 Data sheet
Data Sheet
3232 and 4141
Hydrostatic Transmissions
For more than 40 years, Danfoss has been developing
state-of-the-art components and systems for mobile
machinery used in off-highway operations around the
world. We have become a preferred supplier by
offering the best of what really matters: The hardware
inside your vehicle application.
The 3232 and 4141 were designed as one housing
style transmission. Both 3232 and 4141 can be used in
the same mechanical transmissions using the same
shaft distances. This design helps with higher life and
performance in the same package and is well suited
for agriculture machines.
Features
Designed for Durability and Flexibility
•
Proven and optimized 9 piston rotating
group
•
Compact one housing design
•
Longer life kit and higher duty
capability in the most compact design
in its class
•
Optimized for short shaft center line
distance
•
Robust Cylinderblock, Piston material
and Valveplate
Installation and Packaging benefits
•
Optimized for short distance between
shaft center lines
•
Pump and motor in single housing
•
Easy-mountabale pad for external
suction filter
•
Reduced noise
Controls
•
Direct Displacement Control (DDC)
•
Low operating force
•
Smooth operational feeling realized by
low vibration
Options
•
Orifice to increase neutral deadband
•
Allows customized shaft design
Comprehensive technical literature online
at powersolutions.danfoss.com
©
Danfoss | May 2016 L1329036 | AI00000206en-US0102 | 1
Technical Specifications
L1
L3
L2
M3
S
P400113
[ 2.08 ]
105
88 88
78.4
172.3
Ø100
72 72
85 85
CCW
CW
78
18
°
18
°
53
15
199.3
Ø104
Case drain Port “L1”
Port ISO 11926-1 – 7/8-14
Charge pressure gage port “M3”
Port ISO 11926-1 – 7/16-20
Charge inlet port “S”(Suction Port)
Port ISO 11926-1 – 7/8-14
Case drain port “L2”/”L3”
Port ISO 11926-1 – 7/8-14
R26
168.5
111.3
14
4141
[ 4.38 ]
[ 0.55 ]
[ 6.63 ]
[ 3.07 ]
[ 6.78 ]
[ 3.08 ]
[ 0.59 ]
[ 7.84 ]
[ 1.61 ][ 1.61 ]
5981.3
[ 2.32 ]
[ 3.20 ]
221.3
[ 8.71 ]
[ 4.13 ]
[ 3.46 ] [ 3.46 ]
[ 3.34 ]
[ 2.83 ]
[ 3.34 ]
[ 2.83 ]
3-M10 p1.5
Shaft spline
JIS D 2001
20×18×1.25
Shaft spline
JIS D 2001
20×18×1.25
Ø100
3-M10 p1.5
18
°
18
°
85
15
217
59
101.6
gage port “M3”
Charge pressure
Ø104
R26
14
174.5
105
93.7183.2
100 100
72 72
85 85
4141
91.5
CCW CW
[ 3.93 ]
[ 3.60 ]
[ 3.68 ][ 7.21 ]
[ 3.93 ]
[ 3.34 ]
[ 8.54 ]
[ 3.99 ]
257
[ 10.12 ]
123.8
[4.87]
[0.55]
]
7
8
.
6
[
]
4
3
.
3
[
[ 0.59 ]
[ 3.34 ] P400114
4141
[ 4.13 ]
[ 1.61 ]
[ 2.32 ]
[ 1.61 ]
[ 2.83 ][ 2.83 ]
53
Pump Input
Motor Output
Pump Input
Motor Output
[ 2.08 ]
Port ISO
11926-1-7/16-20
Charge inlet port “S”(Suction Port)
Port ISO 11926-1 – 7/8-14
Case drain port “L1”
Port ISO 11926-1 – 7/8-14
Case drain port “L2”/”L3”
Port ISO 11926-1 – 7/8-14
Shaft spline
JIS D 2001
20×18×1.25
Shaft spline
JIS D 2001
20×18×1.25
3232
Physical properties
Features Unit 3232 4141
Pump Displacement cm3 [in3] 0 - 31.5 [0 - 1.92] 0 - 40.9 [0 - 2.50]
Motor Displacement cm3 [in3] 31.5 [1.92] 40.9 [2.50]
Weight, (dry) kg [lb] 22 [48.5] 29.5 [65.0]
Operating parameters
Features Unit 3232 4141
Input
Speed
System
Pressure
Rated min-1 (rpm) 3200 3200
Maximum 3400 3400
Maximum Working
1
Pressure
bar [psi] 300 [4350] 300 [4350]
Maximum Pressure 345 [5000] 345 [5000]
1
Applied pressures above maximum working pressure requires Danfoss
application approval.
Dimensions
Schematic
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products
already on order provided that such alterations can be made without changes being necessary in specifications already agreed.
All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
2 | © Danfoss | May 2016 L1329036 | AI00000206en-US0102
Loading...