Dan Force BOLD-S HEADLAMP User Manual

BOLD-s

HEADLAMP

2018 User Manual

LIGHT

YOUR WAY

TABLE OF CONTENTS

1

2

3

4

A. Package Includes

B. Your DanForce Bold-s

C. Batteries

D. Charging the batteries

E. Adjusting the Headlamp

5

6

7

F. Light Modes

G. Focus System

H. Warning

8

1

A. Package include

1. Bold-s Headlamp

2. X2 18650 Rechargeable lithium-ion Batteries

3. USB cable

4. Carry Bag

5. Carabiner

1. Main LED

2. Secondary LEDs

3. Main Buon

4. Focus

5. Baery case

6. Upper Strap

7. Side Strap

8. Headlamp Forehead

9. Strap Adjuster

B. Your Bold-s

2

9

2

3

4

5

7

6

1

8

To use the Bold-pro with the best performance, use only MSFORCE
batteries. Use only 18650 3.7v lithium-ion batteries.

Prior to rst use fully charge the baeries.

Rechargeable Baeries specs:
Model: MsForce 18650 Li-ion battery
Capacity: 2200 mAh
Voltage: 3.7 V

3

C. Baeries

FULLY CHARGE BATTERIES BEFORE FIRST USE.
Inial baery charge may take up to 7 hours.
Subsequent baery charge me will take
5 to 7 hours.

D. Charging the baeries

4

Blinking blue light - Charging
Steady blue light - Done charging

• Remove all baery packaging

• Open the baery pack located on the back
of the headlamp , insert the baeries and
close the silicon cover.

• Open the charging port on the pack and connect

the charging cable

• Connect the cable’s end into an electrical outlet /PC/ Power Bank/Bank/Other
electronic power source USB slot. Input: 1A / 2A

• Place the headlamp strap snugly on your head
so that the headlamp unit is centered on your forehead; and the baery pack is

centered at the back of your head, above your ears.

• Adjust the tension of the strap by moving the strap
adjuster

• The headlamp light angle can be easily
adjusted by rotang the headlamp
unit up or down; the full range of moon
is 90 degrees.

E. Adjusng the Headlamp

5

6

Locate the buon on the top of the headlamp
Press the buon the following numbers of
mes to access the 5 white LED modes:

1. Main LED

2. Secondary LEDs

3. ALL LEDs

4. Strobe

5. OFF

F. Light Modes

Red LED:

To access red light from white LED modes \ OFF , Click on
main button for 3 sec.
Red Lights has 1 light modes:

7

G. Focus system

• Locate the rims at the front edges
of each of the LED lamps

• Rotate the rim(s) clockwise to focus
the light beam(s)

• Rotate the rim(s) counterclockwise to
diuse the light beam(s)

8

G.WARNING

CUSTOMER SUPPORT

DanForce is dedicated to providing the best possible service. To reach DanForce

Customer Support, visit danforce.com/pages/customer-service.

Email us: [e-mail]

wwww.danforce.com