Danelectro Fab Tone Owner`s Manual [en, fr, de, es, it, nl, pt, jp]

FABTONE

TM

“Fab Distortion From the Tube Pioneers”

OWNER’S MANUAL

1

Danelectro always made insanely great gear.

We pioneered tube amps in the 40’s. Our guitars

were king of the rock scene in the 50’s and 60’s.

Top players still love them.

Collectors snap them up.

Now we’re back with incredible vintage effects.

Own the sounds of yesteryear!

HEARING ISBELIEVING.

EEC Agent:

John Hornby Skewes & Co., Ltd.

Salem House, Parkinson Approach, Garforth, Leeds LS25 2HR UK

32

Connect instrument cable to the IN jack. Connect amplifier
cable to the OUT jack. If using Danelectro AC Adaptor,
connect to DC 9-Volt jack. (Use only a 9-Volt adaptor for
this unit, not 18-Volt).

LED light will be on when foot switch is activated.

Control Functions:
VOL: This control sets the level of output to the amplifier.
BASS: Controls the gain of the bass frequencies.
TREB: Controls the gain of the treble frequencies.
FAB: Use this control to set the amount of distortion.

Caution: This is a high gain device. Start with the VOL
control at 25% and then advance as needed.

FAB TONE D

ISTORTION

DD-1 INSTRUCTIONS

•

•

•

•

BATTERY: Uses one S-006P 9-Volt Battery. Danelectro “Vintage Power Source”
batteries are recommended.

Battery Eliminator: Uses 9-Volt battery eliminator. Polarity: Center negative (–).
300mA maximum.

TM

ALTERNATIVE

CONTROL SETTINGS

VOL

BASS TREB

FAB

54

FAB LEAD

CONTROL SETTINGS

VOL

BASS TREB

FAB

BRITISH STAC K

CONTROL SETTINGS

VOL

BASS TREB

FAB

76

BLUES SOLO

CONTROL SETTINGS

VOL

BASS TREB

FAB

FACE MELT

CONTROL SETTINGS

VOL

BASS TREB

FAB