Danelectro E-15 User Manual

Page 1
H
O
N
E
Y
O
N
E
By
EEC Agent: John Hornby Skewes & Co., Ltd. Salem House, Parkinson Approach, Garforth, Leeds LS25 2HR UK
© EC 1999 Printed in China
e-15
OWNER’S MANUAL
e-15
Page 2
Danelectro always made insanely great gear.
H
O
N
E
Y
T
O
N
E
By
We pioneered tube amps in the 40’s. Our guitars
were king of the rock scene in the 50’s and 60’s.
Top players still love them.
Collectors snap them up.
Now we’re back with great vintage gear.
Own the sounds of yesteryear!
HEARINGISBELIEVING.
INSTRUCTIONS e-15
Connect instrument cable to the IN jack If using Danelectro AC Adaptor, connect to DC 9-Volt jack.
e-15 Controls are:
• POWER ON/OFF
• ECHO ON/OFF
• OVERDRIVE ON/OFF
• OVERDRIVE CONTROL: Use this to adjust the amount of distortion.
• VOLUME CONTROL: This controls the overall volume of output.
• LINE OUT JACK. Use this to send the output of the Honeytone to your amplifier.
• LED. Light is on when POWER switch is ON.
CAUTIONS: Exposure to loud music can cause temporary or permanent hearing loss. Take care to use appropriate volume levels through speaker or headphones.
BATTERY: Uses one S-006P 9-Volt Battery. Danelectro “Vintage Power Source” batteries are recommended.
Battery Eliminator: Uses 9-Volt batter y eliminator. Polarity: Center negative (–) adaptor plug. 300mA maximum. Danelectro Zero Hum
DA-1 Adaptor is recommended.
Loading...