Danelectro Dan Echo Owner`s Manual [en, fr, de, es, it, nl, pt, jp]
Dan-Echo
Tape Echo
OWNER’S MANUAL
TM
Danelectro always made insanely great gear.
We pioneered tube amps in the 40’s. Our guitars
were king of the rock scene in the 50’s and 60’s.
Top players still love them.
Collectors snap them up.
Now we’re back with incredible vintage effects.
Own the sounds of yesteryear!
HEARING ISBELIEVING.
EEC Agent:
John Hornby Skewes & Co., Ltd.
Salem House, Parkinson Approach, Garforth, Leeds LS25 2HR UK
Connect instrument cable to the IN jack. Battery power is
activated when cable is connected to IN jack. Connect
amplifier cable to the OUT jack. If using Danelectro AC
Adaptor, connect to DC 9-Volt jack.
LED light will be on when foot switch is activated.
Control Functions:
MIX: Use to select the mix of dry to echo/delay signal.
HI-LO: Use to set long (Hi) or short (Lo) echo/delay times.
SPEED: Use to select the length of echo/delay within the
HI or LO speed range selected.
REPEATS: Use to set the number of repeats.
HI CUT: Cuts the high frequency on the delayed signal.
Each successive repeat suffers further high
frequency cut. This simulates a vintage tape
echo.
Dan-Echo
DE-1 INSTRUCTIONS
•
•
•
BATTERY: Uses one S-006P 9-Volt Battery. Danelectro “Vintage Power Source”
batteries are recommended.
Battery Eliminator: Uses 9-Volt battery eliminator. Polarity: Center negative (–) adaptor
plug. 300mA maximum. Danelectro Zero Hum
™
DA-1 Adaptor is recommended.
TM
SOLO DELAY
CONTROL SETTINGS
MIX
SPEED
LO-HI
REPEATS
HI-CUT
CLASSIC R
OCK
CONTROL SETTINGS
MIX
SPEED
LO-HI
REPEATS
HI-CUT
L.A. STUDIO
CONTROL SETTINGS
MIX
SPEED
LO-HI
REPEATS
HI-CUT
DARK ROOM ECHO
CONTROL SETTINGS
MIX
SPEED
LO-HI
REPEATS
HI-CUT
PSYCHEDELIC 60’S
CONTROL SETTINGS
MIX
SPEED
LO-HI
REPEATS
HI-CUT
HARMONIZING DELAY
CONTROL SETTINGS
MIX
SPEED
LO-HI
REPEATS
HI-CUT
70’S RHYTHM
CONTROL SETTINGS
MIX
SPEED
LO-HI
REPEATS
HI-CUT
Play any major scale eighth notes at 120 bpm
and delay will harmonize at seperate intervals.
Loading...