DO-1
© EC 1997 Printed in China
DADDYO.
“The Gran Daddy of Overdrive”
TM
OWNER’SMANUAL
Danelectro always made insanely great gear.
We pioneered tube amps in the 40’s. Our guitars
were king of the rock scene in the 50’s and 60’s.
Top players still love them.
This product complies with FCC Part 15 rules. Operation of this product is permitted in USA provided this
product does not cause harmful interference and provided this pro duct a ccepts inte rferenc e from oth er
devic e s, even if that inte rference is de triment al to
performance of this product.
Salem House, Parkinson Approach, Garforth, Leeds LS25 2HR UK
EEC Agent:
John Hornby Skewes & Co., Ltd.
Collectors snap them up.
Now we’re back with incredible vintage effects.
Own the sounds of yesteryear!
HEARINGISBELIEVING.
1
DADDYO. OVERDRIVE
TM
DO-1 INSTRUCTIONS
Connect instrument cable to the IN jack. Connect amplifier
•
cable to the OUT jack. If using Danelectro AC Adaptor,
connect to DC 9-Volt jack. (Use only a 9-Volt adaptor for
this unit, not 18-Volt).
CONTROL SETTINGS
60’sBRITISH CRUNCH
•
LED light will be on when foot switch is activated.
•
Control Functions:
VOL: This control sets the level of output to the
amplifier.
BASS: Controls the gain of the bass frequencies.
MID: Controls the gain of the mid frequencies.
TREB: Controls the gain of the treble frequencies
O. DRIVE: Use this control to set the amount of overdrive.
BATTERY: Uses one S-006P 9-Volt Battery. Danelectro “Vintage Power Source”
batteries are recommended.
Battery Eliminator: Uses 9-Volt battery eliminator. Polarity: Center negative (–).
300mA maximum.
2
VOL
BASS
MID
O. DRIVE
TREB
3