Danatronics MTG-99 Specifications

n

Measures the Thickness of All Nonferrous Materials

n

Nondestructive Measurements

n

0.001” to 1” Thickness Range

n

Minimum Thickness Capture with

Vibrate on Alarm

n

Datalogger with Interface to

Microsoft Excel

n

Made in USA

™

MTG 99

Hall Eect
Thickness

Gage

Specications MTG 99

GENERAL

Overall Dimension: 7.25” L x 4.00” W x-2.00” H

(184mm x 101.6mm x 50.8mm)

Weight: 1.15 lbs (.52 kg) with internal Li-Ion battery
Operation temperature: -4 to 122F (-20 to 50C)
Keypad: Illuminating rubber keypad
Languages: English, French, German, Spanish, Italian, Russian,

Czech, Finnish, Chinese, Japanese, Hungarian

Data Storage: Onboard & removable up to 32 GB MicroSD card
Battery Life: 16 h (lithium-ion) (TBD)
AC Power Requirements: AC Mains: 100 VAC to120 VAC,

200 VAC to 240 VAC

Display Type: 3.5” high resolution color TFT display,

320 x 240 pixels (1/4 VGA), sunlight readable, including
multiple color pallets

Backlight: Light Emitting Diode (LED) backlight. Includes

variable light intensity.

Display Dimensions: (W x H, Diag.) 2.76 in. x 2.07 in., 3.5 in.

(70.08 mm x 52.56 mm, 88.9 mm)

Min/Max Capture Mode: Captured at 60 Hz measurement rate
Display Formats: 4 modes; Thickness only, Thickness with

3 additional customizable choices, Thickness and Strip chart,
Grid View

Display Update Rate: 4, 8, 16 and 20 Hz

Alarm: High and Low alarms with vibrate feature
Thickness Range: 0.0001”-1.00” (0.001-25.4 mm) of any

non-ferrous material with access to both sides

Resolution: 0.01 in. (0.1 mm), 0.001 in. (0.01 mm), 0.0001 in.

(0.001 mm), (depending on thickness range)

Data Logger: Internal le-based alphanumeric data logger
Memory Card: Maximum capacity: 32 GB removable MicroSD

memory card

Shuto: selectable 1-31 minutes or “Never” shut o

INPUTS/OUTPUTS

USB 2.0 peripheral port
RS-232 (Optional)
Bluetooth (optional): Send and receive readings and les

via bluetooth.
Available on iPhones, Androids, iPads and tablets via the App

store or Google Play

ENVIRONMENTAL TESTING: Designed for IP67

PROBE

PR-1 Standard straight probe 3.25 in. (82.75 mm) long and

0.827 in. (21 mm) dia.

STANDARD INCLUSIONS

MTG-99 Magnetic Thickness Gage including: PR-1 probe,
calibration kit (MTG-CAL-KIT), 2 piece stand to hold probe
(MTG-2PS), Stand (MTG-SC), charger adapter with USB cable
(ECHO-CA ) transport case (MTG-TC), MTG-Cable-10, coiled
cable for PR-1, datalogger with 2 Gb of micro sd card memory
and Data XL interface program to send saved readings to
Micorsoft excel.*

*Standardinclusions may vary depending on your location. Contact

your local distributor.

OPTIONAL ACCESSORIES

ER-ACC-KIT: Extended range calibration kit
ECHO-CA:External power supply with charger
TG-FS: modication of MTG-99 to accept footswitch (footswitch

not included) Remote footswitch

FS-09: Footswitch
MTG-CABLE-10:Coiled cable for PR-1
PR1-WC: Replaceable wear cap for PR-1
PR1-CWC: Chisel tip wear cap for PR-1
PR1-EWC: Extended wear cap for PR-1
BT-062: Target balls 1/16 in. (1.58 mm)
BT-125: Target balls 1/8 in. (3.17 mm)
BT-187: Target balls 3/16 in. (4.76 mm)
BT-250: Target balls 1/4 in. (6.35 mm)
MBT-187: Magnetic target balls 3/16 in. (4.76 mm)
MBT-250: Magnetic target balls 1/4 in. (6.35 mm)
ACC-ER-KIT:Extended calibration kit
CAL-NIST:NIST-traced calibration standards (set of six)
Stand with Heavy Duty Bail: Variable angle stand includes

rubber boot with wrist strap

The MTG 99 oers an expanded list of target options to greatly extend its measurement capability.

Targets Min Thickness Max Thickness Accuracy

PR-1

1/16 in. (1.58 mm) ball (BT-062) 0.0001 in. (0.001 mm) 0.080 in. (2.03 mm) 4% 3%

1/8 in. (3.17 mm) ball (BT-125) 0.0001 in. (0.001 mm) 0.240 in. (6.1 mm) 4% 2%

3/16 in. (4.76 mm) ball (BT-187) 0.0001 in. (0.001 mm) 0.360 in. (9.1 mm) 3% 1%

1/4 in. (6.35 mm) ball (BT-250) 0.0001 in. (0.001 mm) 0.360 in. (9.1 mm) 3% 1%

3/16 in. (4.76 mm) magnetic ball (MBT-187) 0.160 in. (4.06 mm) 0.750 in. (19.05 mm) 3% 1%

1/4 in. (6.35 mm) magnetic ball (MBT-250) 0.160 in. (4.06 mm) 1.00 in. (25.4 mm) 3% 1%

Note: Measurement Tolerance = [(accuracy x thickness)+(0.0001 in. or 0.003 mm)]

Basic Calibration Multipoint

Danatronics Corporation, 150A Andover St., Suite 8C, Danvers, MA 01923
Tel: [phone] • Fax: [phone] • www.danatronics.com

Copyright 2019 by Danatronics • Specications subject to change without notice.