Danatronics EHC-09 Data sheet

HC-09DLW

E

EHC-09B

HC-09DL

E

|

EHC-09A

|

|

HC-09

E

For more information, call us at

978-777-0081 or email

[e-mail]

or visit www.danatronics.com

to arrange a demonstration.

We didn’t Think So.

With more than 75 years of world-wide experience in ultrasonic designs,
Danatronics offers our complete line of portable, digital, hand-held ultrasonic
thickness gages; the EHC-09DLW, EHC-O9DL, EHC-09, EHC-09B and newest
EHC-09A. The EHC-09 series of ultrasonic thickness gages are specifically
designed to measure from one side only the remaining wall thickness of
primarily steel structures subject to corrosion.

EHC-09A

The EHC-09A is our entry level ultrasonic thickness gage packaged in
the same field proven IP54 rated case with rubber keypad as the rest of
our EHC-09 Series. The standard probe can measure steel from .040-20”
(1-508mm) while offering full field upgradeability to echo to echo to
ignore coatings, 100K datalogger as well as A-Scan and B-Scan.

EHC-09B

The EHC-09B is our general purpose model ultrasonic thickness gage designed
to make reliable, accurate thickness readings on mostly steel structures. The
EHC-09B offers a simple user interface, can be used with all the transducers of
the EHC-09 and Datalogger version and is easily upgraded in the field to the
EHC-09, EHC-09DL and EHC-09DLW, no need to return the unit to the factory.

EHC-09

The EHC-09 is our mid-range model combining the most commonly used
features such as Echo to Echo to ignore coatings. With the EHC-09 you
can increase or decrease the gain, vibrate and illuminate the keypad on alarm
conditions. We offer a simple, field upgradeable path to add the 100,000
thickness reading datalogger with

EHC-09DL/EHC-09DLW

The EHC-09DL/EHC-09DLCW are the top of the line models offering all the same
features of the EHC-09 plus our flexible datalogger, B-Scan and Echo to Echo.
It also includes a custom molded pouch with belt clip and elastic strap to
easily hold the unit in
The EHC-09DLW has live waveform.

either the left or right hand.

B-scan and live waveform for echo verification.

Additional features:

Two point calibration

Graphic display with
multi language support

Field upgradeable
options (no need to
take the unit out of
the field)

Made in USA

2 year warranty

© 2013 Danatronics. All rights reserved.

See product differentiation chart for more details.

WWW.DANATRONICS.COM

EHC-09DLW| EHC-09DL|EHC-09

EHC-09B

EHC-09A

|

Specifications for the EHC-09 Series Ultrasonic Thickness Gages

Specifications are subject to change for

product improvement without notice

Size: 5" (127 mm) (L) x 3" (76.2 mm) (W) x 1.25" (31.75 mm) (H)

Weight: 8 OZ (.23 kg)

Thickness range: 0.020 - 20 inches (.50 mm - 508 mm) in steel,

depending on material, temperature and transducer selection

Material Velocity Calibration Range: 0.0200 - 0.7362 in/

0.508 - 18.699 mm/

(

uS

I

).

uS

I

Temperature: Gage Operating: -4° F to 122° F (-20° C to 50° C) High

emperature transducers available for material temperatures from -5° F to

t
950° F (-20.5° C to 510° C)

Battery life: Up to 50 hours (20 hours with backlight on)

Battery type: 2 "AA" Alkaline

Display: 128 X 64 Graphics LCD monochrome, sunlight readable

Language support: multi language of English, French, Spanish, Italian,

Czech, German, Portuguese, Slovak, Finnish, and Hungarian

Information displays: Loss of signal (LOS), min, max, large reading while

displaying min at the same time, velocity, zero, calibration, units, freeze, unfreeze,
% battery life remaining, gain - low, std, high, echo to echo symbol

Resolution: .001" (.01 mm), .01" (.1mm) user selectable

Probe recognition: Via a pick list from a menu

Delay line auto zero measurement: Auto at power up with listed numeric

value. Ideal for correcting delay line wear/curvature and for transducer acoustic
drift at elevated temperatures

Package: IP54 rated Custom, splash-proof, high impact plastic with

illuminating rubber keypad for go/no-go testing

Bandwidth: 0.5-20 MHz (-3dB)

Units: English/Metric/Microseconds

Gain: Low, Standard and High for varying test conditions (for gages

without a waveform) or 1 dB steps from 20-90 dB or Automatic Gain Control
(AGC) for gages with a waveform

Fast Min/Max Mode: Simultaneously displays minimum or maximum

and actual thickness value at 20 measurements per second

Differential Mode: Displays the difference from the actual thickness

measurement in absolute or percentage of a user entered reference value

Alarms: Minimum/Maximum depth, vibrates, beeps and display flashes

as well as keypad illumination

Illuminating keypad: F1 = Red, F2 = Yellow and F3 = Green for easy

go/no-go testing

Ergonomics: User selectable lefty or rightly display changes via keypad

Backlight: Light Emitting Diode, On/Off or Auto On based on valid

readings or last key press

Shut off: Auto, user programmable time out (1-31 minutes), after no

reading/key press or never shut off

Protective pouch: Custom molded pouch with wrist strap and belt clip

(Optional, standard on DLW and DL gages)

Transport case: Hard Plastic with high density molded foam cut out for

gage and most accessories

Freeze mode:

Hold mode:

Freezes display (ideal for high temperature readings)

Holds display to retain last thickness reading

Standard EHC-09 Wave Series includes: Ultrasonic thickness gage,

DKS-537, 5 MHz 0.375 inch diameter potted cable, operational manual,
Data XL interface program, couplant, and transport case. See chart below for
standard inclusions for each gage

Warranty: Limited 2 year warranty on parts and labor for gage only

under normal use

Transducers: A wide variety of dual transducers from 1-10 mhz, high

temperature duals, delay lines and pencil probes. Note the EHC-09A only
works with the DK-718, DK(S)-537 and the DC-250.

Item Specification EHC-09DLW EHC-09DL EHC-09 EHC-09 B EHC-09 A

Language: English, French, Spanish, Italian,Czech, German, Portuguese, Slovak, Finnish, and Hungarian

Thickness range:

Hold mode:

Freeze mode:

Fast Min/Max Mode:

Units:

Alarms:

Illuminating keypad:

Gain:

Differential Mode:

Velocity Mode:

Non-Encoded B-Scan:

Echo to Echo:

Datalogger:

Carrying Pouch:

Live Waveform (A-scan)

© 2013 Danatronics, Corp. | Danatronics Corporation | 150A Andover St., Suite 8C | Danvers, MA 01923

0.020 - 20 inches (.50 mm - 508 mm)

Holds display to retain last thickness reading with reverse video display

Freezes display

Simultaneously displays minimum or maximum and actual thickness value at 20 measurements per second

Inches/Millimeters/Microseconds

Minimum/Maximum depth, vibrates, beeps and display flashes as well as keypad illumination and vibration

F1 = Red, F2 = Yellow and F3 = Green for easy, go/no-go testing

Variable adjustment of gain
Displays the difference from the actual thickness measurement and a user entered reference value

Displays acoustic sound speed

Displays a cross section of the test piece

Measures the metal thickness only (ignore paint and coatings)

Upgrade to Data Logger Version, 100,000 readings in linear, 2D, 3D grid or boiler alphanumeric files,
20 character file name, export to excel via Data XL interface program, also compatable with Ultrapipe

Custom molded with belt clip and elastic strap

Full adjustments, for gain in 1db step or AGC, main bang blank, blank after first received echo, range including
zoom auto tracking to center echoes independent of material and rectification

Phone: [phone] | Fax: [phone] | www.danatronics.com

O

*

O

O

O

O

O

O

O

EHC-09B does not include vibrate feature

*

O = Software options that are field upgradeable, no need to return the unit to the factory

O

O
O

O

O

O

O

O

O

O

O

O
O

O

O

O

EHC-09DLW| EHC-09DL|EHC-09

EHC-09B

EHC-09A

|