Danaher Controls 1133, 1134 Data Sheet

VEEDER-ROOT brand

Mechanical & Electric Counters

E C

C O

T R

A time-proven, classic design. Choose the Series 1133, 1134 for your most punishing applications – even the count wheels consist of aluminum shells with steel engaging parts. Direct drive models use prelubricated bronze bearings which are capable of 1000 rpm continuous operation. Ball bearings used in the Revolution Drive model easily handle 2000 rpm, continuous.

■ Heavy duty base mounting

■ High speed continuous operation

■ 5 white-on-black figures – counts to 99999

■ Revolution drive – one count per revolution

■ Direct drive – 10 counts per revolution

■ 1/4 inch (6.35 mm) shaft fits standard measuring wheels

■ Bidirectional counting

■ Convenient rotary reset to zero

■ All metal, tough industrial duty construction

■ Count speeds to 10,000 C.P.M. (direct drive)

■ Lubrication not required

A brass housing and chrome-on-steel shaft ensure maximum strength and corrosion resistance.

1133, 1134 High Speed

Heavy-duty bearings, large diameter shaft, and a speed rating to 10,000 counts/minute . . . this one’s for the toughest applications

SPECIFICATIONS

Drive Ratios:

Series 1133:

in specified rotation, number 3 or 4 rotation only; subtracts for opposite rotation; pre-lubricated porous bronze sleeve bearings

Series 1134

revolution; subtracts for opposite rotation; ball bearings

Speed: Direct Drive: 1000 rpm continuous, 1500 rpm intermittent; Revolution

Drive: 2000 rpm continuous, 3000 rpm intermittent

Torque: Maximum static: 1.0 oz-in. (.71 N.cm) Figures: 5; 0.188 in. high by 0.099 in. wide; white on black Reset: Manual wing nut; push-in engagement with 360° turn Lubrication: Not required Mounting: Base Construction: Case: Bras; Shaft: Chrome plated steel; Wheels: Aluminum

shell, steel parts; Gears, Pinions: Chrome plated steel; End Caps: Zamak

Net Weight: 7 oz. (198.6 g.)

Model No. Description Rotation 0113335-005 Direct drive 0113345-005 Direct drive

0113445-005 Revolution drive

Direct Drive, adds ten counts for each drive shaft revolution

Revolution Drive, adds one count for each drive shaft

Typical Applications:

Coil Winding

3.12

VEEDER-ROOT • EAGLE SIGNAL • DYNAPAR

123456

Table

Positioning

Drill

Leadscrew

123456

Dimensions:

1.440"

36.6 mm

1.295"

32.9 mm

1.200"

30.5 mm

(4) .128" Dia.

3.3 mm

.962"

24.4 mm

0.810"

20.57 mm

4.110"

104.4 mm

2.460"

62.5 mm

1.493"

37.9 mm

1.405"

35.7 mm

1.780"

45.2 mm

.656"

16.7 mm

.386"

9.8 mm

1.491"

37.9 mm

27.0 mm

1.734"

44.0 mm

Sleeve

Bearing

1.062"

.500"

12.7 mm

.250" Dia.

6.35 mm

.427"

.468"

11.9 mm