dallas semiconductor DS9094 service manual

DS9094

www.dalsemi.com

查询DS9094供应商

FEATURES

§ Low-cost holder for 16.3 mm MicroCan

§ Printed circuit board mount

§ Contacts are 302 spring stainless steel

§ Flammability rating: UL94V-O

§ Two versions:

− DS9094F for F5 MicroCan (flanged

rim, 5.8 mm high)

− DS9094FS for surface mounting F5

MicroCan (flanged rim, 5.8 mm high)

§ Printed circuit contacts are selectively tin-

lead plated for improved solderability

iButtonTM Clip

PC BOARD MOUNTING DETAILS

DESCRIPTION

The DS9094 iButton Clip holds an iButton and connects to a printed circuit board. By deflecting the
spring clip in the molded housing, an iButton can be inserted and extracted without special tools. If
reverse insertion is attempted, the beveled edge on the housing prevents contact.

NOTE:

Due to the large variation of cycles and temperatures in reflow ovens, it is recommended to experiment
with this clip first before using it in production. If guaranteed compliance with the reflow soldering
process is required, the DS9098 iButton Retainer should be preferred.

All dimensions are in millimeters.

1 of 1 101199