dallas semiconductor DS9093x service manual

DS9093x

www.dalsemi.com

查询DS9093X供应商

DS9093x

iButtonTM Mount Products

FEATURES

§ Key ring mount version:

− DS9093F snap-in fob for use with F5

MicroCan

− DS9093N angled fob for use with F5

MicroCan

− DS9093A snap-in angled fob for use with

F5 MicroCan

§ Two permanent mount versions:

− DS9093S allows an iButton to be easily

and permanently attached to an object
using screws or rivets (F5 MicroCan)

− DS9093P has a locating pin and a single

mounting hole for permanent attachment
(F5 MicroCan)

§ Pre-punched hole mount:

− DS9093RA lock ring firmly fastens F5

package

− DS9093RB flange enlargement provides

additional flange surface area if needed

TM

KEY RING MOUNTS
DS9093F

DS9093A

DS9093N

1 of 3 020998

DS9093x

DESCRIPTION

The DS9093 iButton Mount Products offer the user low-cost fixtures that hold an iButton for thumbpad
applications or permanent attachment to an object.

The DS9093F plastic snap-in fob offers the simplest way to mount an iButton for applications that require
only momentary contact. The fob can be attached to a key ring for carrying. Do not apply solvents or
adhesives to this fob. This might affect the mechanical strength and reliability.

The DS9093N angled fob is an alternate way to mount an iButton for applications that require only
momentary contact. Due to the different mounting technique, the DS9093N can be used with the F5
MicroCan only. The iButton is inserted into this fob by press-fitting. For permanent mount, the iButton
can be locked by a DS9093RA Lock Ring.

The DS9093A is very similar to the DS9093N. It has about the same size as the DS9093N and can be
used with the F5 MicroCan only. The iButton is inserted by press-fitting the flange of the MicroCan into
the cavity of the fob. In contrast to the DS9093N, no additional parts are needed for permanent mounting.
The DS9093A is available in black, blue, green, red and yellow.

THROUGH-MOUNT FOR CONTAINERS

The DS9093S and DS9093P allow the user to permanently attach an iButton to an object with one or two
screws, rivets, etc. The plastic plate is designed with an inset that accommodates the flange of the F5
package and allows for flush mounting. A protective wall is provided along the sides of the plate to
reduce incidental damage to the iButton.

2 of 3 020998