dallas semiconductor DS9005 service manual
Y
查询DS9005供应商
FEATURES
• Low-cost molded enclosure
• Two-piece, snap together construction
• Made of rugged, flame-retardant polyester PBT
plastic
• Accepts DS9006 SIP Stik Motherboard or any other
single size Eurocard printed circuit board
DS9005
PRELIMINAR
DS9005
Eurocard Enclosure
• Can be custom machined to allow for connector
requirements
• Component clearance of .230” solder side, 1.000”
circuit side using .062” board
• Smooth indents on bottom side for rubber bumpers
• Hole knockouts for mounting
DESCRIPTION
The DS9005 Eurocard Enclosure is a rugged, twopiece snap together plastic enclosure for any standalone system application. The PCB is offset in the enclosure to allow for components such as transformers and
SIP Stiks to be positioned on the topside of the board
while still leaving room for standard IC packages and
discretes on the bottom side of the board. The housing
is constructed of flame-retardant polyester PBT plastic
to allow for applications requiring a very wide range of
temperatures and is highly resistant to most chemicals. The size of the board and location of I/O connectors should match the DS9006 SIP Stik Motherboard.
Applications include control units, handheld remote
communications, and security systems.
020698 1/1
Loading...