Da-Lite Roll-AroundMarker Boards Instructions Manual

Printed in U.S.A. 53114 Rev. 6/02
DA-LITE IS MORE THAN PROJECTION SCREENS
Da-Lite Tripod, Wall & Ceiling and Electric Screens
Da-Lite Overhead Projectors
Da-Lite Lecterns Communications Cabinets
Da-Lite Project-O-Stands and Easels
Da-Lite Model 5000 Portable
POWER
PRESENTATION PRODUCTS
The
In
Instructions For
Roll-Around
Marker Boards
DA-LITE SCREEN COMPANY, INC.
3100 North Detroit Street Post Office Box 137 Warsaw, Indiana 46581-0137 Phone: 574/267-8101 800-622-3737 Fax: 574/267-7804 http:// www.da-lite.com e-mail: info@da-lite.com
ASSEMBLY INSTRUCTIONS
NOTE: It requires two people to assemble this easel.
1. Place upright “A” on flat surface with thread­ed holes facing up.
2. Place chalk tray “B” on upright “A”; insert four (4) 1/4”-20 screws into holes and tighten with screwdriver.
3. Stand partially assembled frame on casters.
4. Stand upright “C” on casters with holes fac­ing chalk tray “B”. With four (4) 1/4”-20 screws, attach chalk tray “B” to upright “C” and tighten with screwdriver.
5. Insert one (1) #14 x 2" screw through top hole in outisde of upright “A” and “C” and to cen­ter hole on marker board “D” and tighten for stability.
6. Insert second #14x2" screw through bottom hole in upright “A” and “C” and into hole on marker board “D” and tighten.
7. Your roll-around marker board is now ready for use.
CASTERS
CASTERS
#14 X 2"
WOOD SCREW
UPRIGHT “A”
1
/4"-20 X 5/8" MACHINE
SCREW
UPRIGHT “C”
MARKER BOARD “D”
CHALK TRAY “B”
HARDWARE PACKAGE CONTAINS: 81/4- 20 x 5/8" Screws 4 #14 x 2" Screws
Loading...