Da-Lite Designer, Designer Manual Manual Instruction Book
INSTRUCTION BOOK FOR
Designer Manual
For Wall Mounting
Hardware Provided
(2) “V” Bars ( one is factory mounted to the back of the case; one will be mounted to the wall)
(6) Toggle Bolts, 4"
(6) Lead Shields, #1014 x 11/2"
(6) Phillips Flat Head Wood Screws, #10 x 2"
Tools Required
Electric Drill
Masonry Bit 5/16" (if mounting in solid masonry or concrete)
Screw Driver, #2 Flat Tip (if using toggle bolts)
or #2 Phillips (if mounting in solid masonry or concrete)
Mount Top Of
Ceiling
Allow A Minimum Of 1 ¼"
From The Ceiling
"V" Bar Flush
With Top Of Case
Determine
Measurement
To The Top Of
The Case
4"
Floor Line
4 ¼"
"V" Bar Mounted
To The Wall
"V" Bar Mounted To
The Back Of The Case
At The Factory
Wall
2
Loading...