Tensioned Contour® Electrol
Automatic Electric Projection Screen
®
SPECIFICATION DATA
SUGGESTED SPECIFICATIONS: projection screen(s),
(H) x (W), electrically operated 120 volt (60 Hz) not
more than 2.4 amp. Shall have specially designed motor mounted inside the
roller, to be three wire with ground, quick reversal type, oiled for life, with
automatic thermal overload cutout, integral gears, capacitor and an electric
brake to prevent coasting. To have preset but adjustable limit switches to
automatically stop the picture surface in the “up” and “down” positions.
Junction box shall be integrated into the housing making it possible to install
the housing and wire to the building’s electrical system during construction.
The junction box shall contain a quick connect connector that is mounted in
the housing for easy plug-in connection to the motorized fabric and roller
assembly. The motorized fabric and roller assembly may be installed in the
metal. Roller mounting brackets to be adjustable to allow centering or
ofsetting of the screen within the case. Screen case to be a two piece design
made of extruded aluminum. Case to be inished in white, lightly textured
powder coat. Screen fabric to be mildew resistant vinyl with black masking
borders standard. Each side of fabric to have a tab guide cable system to
maintain even lateral tension and hold surface lat. Bottom of fabric to be
inserted into a custom aluminum slat bar with added weight to provide
vertical tension on the screen surface. The ends of the slat to be protected by
heavy duty plastic caps enclosing a preset adjustable mechanism for screen
tensioning. To be complete with integrated low voltage control unit and three
position control switch and cover plate. Screen to be listed by Underwriters’
Laboratories.
case at the factory or at a later time at the job site. The roller to be of rigid
HDTV (16:9) Format Dimensions
Overall Length of Case
Viewing Area (H x W) Nominal Diagonal
In. Cm In. Cm In. Cm In. Cm Lbs. Kg
45" x 80" 114 x 203 92" 234 100¼" 255 99¼" 252 79 35.8
52" x 92" 132 x 234 106" 269 113¼" 288 111¾" 284 83 37.6
54" x 96" 137 x 244 110" 279 117¼" 298 116¼" 295 86 39
58" x 104" 147 x 264 119" 302 125¾" 319 124¾" 317 95 43.1
65" x 116" 165 x 295 133" 338 138¾" 352 - - 114 51.7
78" x 139" 198 x 353 159" 404 159¾" 406 - - 134 60.8
90" x 160" 229 x 406 184" 467 181¾" 462 - - 148 6 7. 3
For Vinyl Surfaces*
Overall Length of Case
For Parallax Surface Approx. Ship. Wt.
Wide (16:10) Format Dimensions
Overall Length of Case
Viewing Area (H x W) Nominal Diagonal
In. Cm In. Cm In. Cm In. Cm Lbs. Kg
50" x 80" 127 x 203 94" 239 100¾" 256 99¾" 2 53 77 34.9
57½" x 92" 146 x 234 109" 277 112¾" 286 112¼" 285 83 37.6
60" x 96" 152 x 244 113" 287 118¾" 302 - - 92 41.7
65" x 104" 165 x 264 123" 312 126¾" 322 - - 95 43.1
69" x 110" 175 x 279 130" 330 133¼" 338 - - 104 47.2
72½" x 116" 184 x 295 137" 348 138¾" 3 52 - - 114 51.7
87" x 139" 221 x 353 164" 417 160¾" 408 - - 126 57.2
100" x 160" 254 x 406 189" 480 181¾" 462 - - 148 67.1
For Vinyl Surfaces*
Overall Length of Case
For Parallax Surface Approx. Ship. Wt.
Video (NTSC 4:3) Format Dimensions
Overall Length of Case
Viewing Area (H x W) Nominal Diagonal
In. Cm In. Cm In. Cm Lbs. Kg
43" x 57" 109 x 145 72" 183 77¼" 196 66 29.9
50" x 67" 127 x 170 84" 213 87¾ " 223 73 33.1
60" x 80" 152 x 203 100" 254 102¼" 260 84 38.1
69" x 92" 175 x 234 120" 305 111¾" 284 94 42.6
87" x 116" 221 x 295 150" 381 137¼" 349 114 51.7
108" x 144" 274 x 366 180" 4 57 167¾" 426 135 61.2
120" x 160" 305 x 406 200" 508 184¼" 468 148 67.1
*Vinyl surfaces include all HD Progressive, Da-Mat, Da-Tex and Dual Vision surfaces
PRODUCT NOTES
• All screens except Parallax standard with 12" black drop at the top. Screens with Parallax surface standard with 2" of black drop at the top.
• Extra drop may alter case dimensions. Contact Da-Lite for details.
• Overall case length dimensions +/- ¼" (6mm).
• Detail dimensional drawings, wiring diagrams and installation instructions available upon request.
• Speciications subject to change without notice.
• Custom formats and sizes available upon request.
For Vinyl Surfaces* Approx. Ship. Wt.
SURFACE INFORMATION
• All viewing surfaces are standard with black backing
except Da-Tex® and Dual Vision.
• Parallax available in sizes up to 58" x 104" in HDTV
format and 57½" x 92" in Wide format.
• HD Progressive 1.1 Perf and HD Progressive 1.1 Contrast
Perf available in sizes up to 87" x 116" in Video format
and 78" x 139" in HDTV format.
• All surfaces will be seamless in the image area.
• All HD Progressive, Da-Mat, Da-Tex and Dual Vision
surfaces are ire retardant.
WHEN ORDERING, MARK APPROPRIATE SELECTIONS
1. Select size from charts on the other side..
2. Select viewing surface (All Da-Lite surfaces are GREENGUARD GOLD Certiied.):
Parallax 0.8
HD Progressive 0.6
HD Progressive 0.9
HD Progressive 1.1
HD Progressive 1.1 Perf
HD Progressive 1.1 Contrast
HD Progressive 1.1 Contrast Perf
HD Progressive 1.3
Da-Mat®
High Contrast Da-Mat®
Da-Tex® (Rear)
Dual Vision
3. Options:
220 Volt (50 Hz) Motor.
Video Projector Interface Control – built-in
(adds 3¾" to case length of 220V motor
version).
SCB100 RS232 Serial Control Board –
SCB200 RS232 Serial Control Board –
built-in (adds 3¾" to length of case).
WC200 Wall Controller.
IR200 Infrared Remote.
Black case (white standard).
built in (adds 3¾" to length of case).
NET100 Ethernet-Serial Adapter
PRODUCT VIEW
SUGGESTED METHODS OF INSTALLATION
Ceiling Mount
Bracket
4. Optional accessories:
Wireless Remote Control for LVC.
Radio Frequency Remote.
Radio Frequency Range
Extender available.
Infrared Remote.
Key Locking Cover Plate for LVC Switch.
Ceiling Hook
Bracket
5⁄"
Case
Hook
2⁄"
2⁄"
A BRAND OF MILESTONE AV TECHNOLOGIES
www.milestone.com
P 800.622.3737 / 574.267.8101
F 877.325.4832 / 574.267.7804
E info@da-lite.com
In British Columbia, Milestone AV Technologies ULC carries on business as
MAVT Milestone AV Technologies ULC.
©2018 Milestone AV Technologies. DL0194 (Rev. 5) 04.18.
Da-Lite is a registered trademarks of Milestone AV Technologies. All other
brand names or marks are used for identiication purposes and are
trademarks of their respective owners. All patents are protected under
existing designations. Other patents pending.
6⅜"
Wall Mount
Bracket
Stop Screw
Project Name:
Architect: Phone:
Contractor: Phone:
Date: Revised: