Page 1
Tensioned
Advantage Electrol
Designed to eliminate the extra step of inishing the screen with trim,
the Advantage line of projection screens is designed with ceiling trim
already in place. Once the screen is installed, the screen’s trim conceals the rough opening eliminating the need to complete additional
trim work.
Sliding installation brackets make it easy to attach the screen housing to the structure above the drop ceiling.
Tensioned screens ensure the smoothest surface possible.
The Tensioned Advantage® Electrol® screen features simple in ceiling
installation that can be done in two stages. The screen case can be
installed during the rough-in construction stage and the fabric
assembly can be completed during the inishing stage.
Features
• All sizes standard with 12” of black drop except for Parallax which is
standard with 2”
• Standard Silent Drive System to keep your screen whisper quiet
(sizes up to 10’x10’)
• Standard Low Voltage Control (LVC) to keep your screen operation lexible
• Smooth Roll Technology to keep your screen perfectly lat
• Slim-Tab, a lower proile and stronger tab design to keep your screen
perfectly taut
• Simple Installation with a new installation kit and user-friendly packaging to
keep you on schedule
• Support includes a comprehensive ive-year warranty to keep you
conident in your purchase
• UL Plenum rated case
• White powder-coated case for a clean aesthetic
• Tensioning Cable System to prevent warping and ensure even
lateral tension
• Available with SCB100 or SCB200 (RS232 serial control board) built into
the case (adds 10" to overall length of case)
• Available with Video Projector Interface (screen trigger) built into the case
(adds 10" to overall length of case of 220V motor version)
• Decora-style, three-button wall switch
• Standard black backing retains projected brightness
• Seamless surfaces in all models
Optional Accessories:
• Radio Frequency Wireless Remote
• Infrared Wireless Remote
• Locking Switch Cover Plate
16:9 HDTV Format
Viewing Area (H x W) Nominal Diagonal
in. cm in. cm
45" x 80" 114 x 203 92" 234
52" x 92" 132 x 234 106" 269
54" x 96" 137 x 244 110" 279
58" x 104" 147 x 264 119" 302
65" x 116" 165 x 295 133" 338
78" x 139" 198 x 353 159" 404
90" x 160" 229 x 406 184" 467
16:10 Wide Format
Viewing Area (H x W) Nominal Diagonal
in. cm in. cm
50" x 80" 127 x 203 94" 239
57½" x 92" 146 x 234 109" 277
60" x 96" 152 x 244 113" 287
65" x 104" 165 x 264 123" 312
69" x 110" 175 x 279 130" 330
72½" x 116" 184 x 295 137" 348
87" x 139" 221 x 353 164" 417
100" x 160 254 x 406 189" 480
4:3 Video Format
Viewing Area (H x W) Nominal Diagonal
in. cm in. cm
43" x 57" 109 x 145 72" 183
50" x 67" 127 x 170 84" 213
60" x 80" 152 x 203 100" 254
69" x 92" 175 x 234 120" 305
87" x 116" 221 x 295 150" 381
108" x 144" 274 x 366 180" 457
120" x 160" 305 x 406 200" 508
*Case length does not include trim lange
Page 2
Available with the Following Screen Surfaces
Front Projection
Parallax 0.8*
Horizontal Half Angle: 85º
Vertical Half Angle: 17º
Gain: 0.8
HD Progressive 1.1 Contrast
Half Angle: 60º Gain: 1.1
HD Progressive 0.6
Half Angle: 85º Gain: 0.6
HD Progressive 1.1
Contrast Perf
HD Progressive 0.9
Half Angle: 85º Gain: 0.9
HD Progressive 1.3
Half Angle: 75º Gain: 1.3
HD Progressive 1.1
Half Angle: 85º Gain: 1.1
Da-Mat
Half Angle: 60º Gain: 1.0
HD Progressive 1.1 Perf
Half Angle: 85º Gain: 1.1
High Contrast Da-Mat
Half Angle: 45º Gain: 0.8
Half Angle: 60º Gain: 1.1
Rear Projection
Dual Vision
Half Angle: 65º Gain: 0.9
Da-Te x
Half Angle: 30º Gain: 1.3
*NOTE: The Advantage Electrol featuring Parallax will look visibly diferent when compared to other Da-Lite tensioned screens with vinyl surfaces. This is due to
the nature of the Parallax material, which is a micro-layered, high-grade plastic lens system. While it may have slight variations in appearance, it is optically lat.
Meaning, that when under projection, the Advantage Electrol featuring Parallax will perform on the same level as the Da-Lite 4K-ready HD Progressive surfaces.
Product images
Case Proile In Ceiling (Closed) In Ceiling (Open)
Page 3
Parallax 0.8 Projector Placement
The examples below are for a ceiling mounted projector, but can be reversed for a table-top projector.
Projector Distance Projection Angle
x
y
25°
x
• Parallax 0.8 requires a minimum Lens Throw Ratio of 1.5:1
• How to calculate Projection Distance (x):
Projection Distance = Screen Width (viewable) x Lens Throw Ratio
Example:
180" projection distance ÷ 96" wide screen = 1.88 (1.88:1 Lens Throw Ratio)
• How to calculate Lens Throw Ratio:
Lens Throw Ratio = Projection Distance ÷ Screen Width (viewable)
Example:
87" wide screen x 1.5 (minimum lens throw ratio) = 130.5 (130.5" projection
distance)
• If the Projection Distance (x) is known, ind the Maximum Vertical Ofset:
Maximum Vertical Ofset (y) = 0.4 x Projection Distance (x)
Example:
Projection Distance (x) = 130.5"
130.5" x 0.4 = 52.2"
52.2" = Maximum Vertical Ofset
• If the Vertical Ofset (y) is known, ind the Minimum Projection Distance:
Minimum Projection Distance (x) = 2.5 x Vertical Ofset (y)
Example:
87" wide screen with a 60" Vertical Ofset (y)
60" x 2.5 = 150"
150" = Minimum Projection Distance
FOR YOUR IMAGE | legrandav.com
USA P 866.977.3901 E info@da-lite.com
CANADA P 877.345.4329 E canadainfo@milestone.com
EMEA P +31 495 580 840 E emea.sales@milestone.com
APAC P +852 2145 4099 E asia.da-lite@milestone.com
In British Columbia, Milestone AV Technologies ULC carries on business as MAVT Milestone AV Technologies ULC.
©2018 Milestone AV Technologies. DL0419 (Rev. 4) 8/18 Da-Lite is a registered trademark of Milestone AV
Technologies. All other brand names or marks are used for identiication purposes and are trademarks of
their respective owners. All patents are protected under existing designations. Other patents pending.
MILESTONE IS NOW LEGRAND
Commercial AV Brands Chief | Da-Lite | Middle Atlantic | Projecta | Vaddio
Loading...