Da-Lite 78444 Installation Guide

INSTRUCTIONS FOR HANGING A DA-LITE SCREEN
TO A DROP OR SUSPENDED CEILING

For use with Model B, Class-Rite or Slimline
Screens. For screens up to 50 lbs. Do not use on

screens weighing over 50 lbs.

1. Measure distance between D-rings of
screen and transfer this distance to T-bar for
location of T-bar clip.

2. Attach T-bar clip to T-bar as shown in
Figures 1 and 2. Note: A support wire must be

attached to the top of the T-bar clip and the
building structure above the drop ceiling.

3. Insert S-hook into hole of adapter and D-ring
of screen.

4. Use pliers to close both loops of S-hook.

5. Do not remove for re-use.

Printed in U.S.A. 45835 Rev. 5/05

T-BAR

FIGURE 1

POWER

PRESENTATION PRODUCTS

The

In

Assembly Instructions

for

T- B AR CLIP

DA-LITE SCREEN COMPANY, INC.

3100 North Detroit Street
Post Office Box 137
Warsaw, Indiana 46581-0137
Phone: [phone]
800-622-3737
Fax: [phone]
www.da-lite.com
e-mail: [e-mail]

T-BAR CLIP

FIGURE 2

PRESS HALVES TOGETHER

UNTIL TAB SNAPS INTO

HOLE

49811-DaLite 45835 TBar Clip 5/12/05 8:37 AM Page 1

T-BAR CLIP

SUPPORT WIRE
(NOT INCLUDED)

T-BAR CLIP

S-HOOK

ADAPTER

49811-DaLite 45835 TBar Clip 5/12/05 8:37 AM Page 2