Da-Lite 70279 User Manual

F R O N T P R O J E C T I O N S C R E E N S

Wall or Ceiling Mounted Electric
Projection Screen

When ordering, make appropriate
selections:

1. Select size from charts at the

lower right.

2. Select viewing surface:

• Matte White
GREENGUARD® and

GREENGUARD® Children and
Schools Certified.

3. Options:

• Extra Drop available to lower
picture area more than normal.
Specify total drop at top _____
(black or white) or at bottom
_____ (black or white). 16'
maximum total surface height
including picture area.

• No borders (Black masking
borders standard).

• Single Motor Low Voltage Control
System (LVC) - external.

• Single Motor Low Voltage Control
System (LVC) - built-in.

• Wireless Remote Control for LVC.

• Radio Frequency Remote

• Radio Frequency Range

Extender available

• Infrared Remote

• Key Locking Cover Plate for 120V
Switch or LVC Switch.

• Key Operated Switch for 120V
only (Note: Cannot be used with
LVC).

• 220 Volt (50 Hz) Motor.

• Video Projector Interface Control

- external.

• External SCB-100 - RS-232 Serial
Control Board

• NET-100 Ethernet-Serial

Adapter

• Black case (white standard).

• Veneer Case Cover (Choose from
seven standard veneers).

• Light Oak

• Medium Oak

• Natural Walnut

• Heritage Walnut

• Mahogany

• Cherry

• Honey Maple

LARGE COSMOPOLITAN® ELECTROL

• Large format motorized wall or ceiling mount screen.

• Included adjustable ceiling and wall mounting brackets
streamline installation.

• Two piece aluminum case allows easy access to motor and
roller.

SUGGESTED SPECIFICATIONS:

________ projection screen(s), _______ (H) x _______ (W),
electrically operated 120 volt (60 Hz) not more than 2.4
amp. Shall have specially designed motor mounted inside
the roller to be three wire with ground quick reversal type,
oiled for life, with automatic thermal overload cut-out, integral
gears, capacitor and an electric brake to prevent coasting.
To have pre-set but adjustable limit switches to automatically
stop picture surface in the “up” and “down” positions. The
roller to be of aluminum. Screen fabric to be flame retardant
and mildew resistant fiberglass with black masking borders
standard. Bottom of fabric shall be formed into a pocket
holding a metal rod. Case to be a two-piece design made of
extruded aluminum with a white, lightly textured powder
coat finish. End caps to be plastic with integrated junction
box. To be complete with three position control switch
with cover plate. Screen to be listed by Underwriters’
Laboratories.

Matte White: Seamless in all standard sizes.

Detailed dimensional drawings, wiring diagrams and installation
instructions available upon request.

Specifications subject to change without notice.

®

Ceiling Mount
Bracket

5/16 x 3/4"
Bolt, Nut
and Lock
Washer

Wall Mount
Bracket

9"

Stop Screw

7-7/8"

7-3/8"

6-3/4"

Viewing Surface

Integrated Junction Box

4:3 VIDEO FORMAT DIMENSIONS (2" standard black drop at top)

Viewing Nominal Overall Approx.
Area Diagonal Case Shipping
H x W Length Wt. Lbs.

120" x 160" 200" 173½" 210
123" x 164" 210" 177½" 225
141" x 188" 240" 201½" 254

16:9 HDTV FORMAT DIMENSIONS (2" standard black drop at top)

Viewing Nominal Overall Approx.
Area Diagonal Case Shipping
H x W Length Wt. Lbs.

92" x 164" 188" 177½" 215
106" x 188" 216" 201½" 241

SQUARE FORMAT DIMENSIONS (no standard black drop at top)

Sizes Overall Approx.
H x W Case Shipping
Length Wt. Lbs.

12' x 12' 153½" 194
14' x 14' 177½" 229
16' x 16' 201½" 263

Overall case length dimensions ±¼".
Note: Custom formats and sizes available upon request.

800-622-3737 • fax [phone]

21