No. 11 EXTENSION WALL BRACKETS
• Screen can be extended 10" or 14" from wall
by simple selecting one of the two mounting
positons shown above.
• Install eye bolts in wall brackets. Determine
the height and location of the screen to be
mounted and mark. Measure the distance
between the centers of the 2 mounting
rings on the screen. Transfer the measurement to the wall and attach the wall
brackets securely to the wall at those points.
• Maximum recommended fastener size is 5/16"
diameter.
• Do not overtighten fasteners.
• Hang screen on eye bolts.
• Extension wall brackets are only to be used
with screens weighing 75 pounds or less.
• For Model C, Model C with CSR and
Cosmopolitan®screens: Hang screen from
the eye bolts with S-hooks. Crimp both loops
of S-hooks closed.
• To provide proper tilt and eliminate keystoning pull the screen down, then hook it back
to the wall by attaching the bail handle to an
accessory Tilt Lock, Da-Lite part No. 40965.
Tilt Lock is sold separately.
No. 23 EXTENSION WALL BRACKETS
• Screen can be extended 181/4", 20" or 24"
from wall by simple selecting one of the two
mounting positons shown above and wing
nut and bolt adjustment.
• Extension arm holes should be lined up with
desired holes in plastic bracket. Attach extension arms to wall brackets.
• Install eye bolts in extension arms.
Determine the height and location of the
screen to be mounted and mark. Measure
the distance between the centers of the 2
mounting rings on the screen. Transfer the
measurement to the wall and attach the wall
brackets securely to the wall at those points.
• Maximum recommended fastener size is 5/16"
diameter.
• Do not overtighten fasteners.
• Hang screen on eye bolts.
• Extension wall brackets are only to be used
with screens weighing 75 pounds or less.
• For Model C, Model C with CSR and
Cosmopolitan®screens: Hang screen from
the eye bolts with S-hooks. Crimp both loops
of S-hooks closed.
• To provide proper tilt and eliminate keystoning pull the screen down, then hook it back
to the wall by attaching the bail handle to an
accessory Tilt Lock, Da-Lite part No. 40965.
Tilt Lock is sold separately.
14" POSITION
10" POSITION
18
1
/4" & 24"
POSITIONS
20"
POSITION
Wall fasteners not
included
Wall fasteners not
included
HEX NUT (4)
EYE BOLT (2)
S-HOOK (2)
HEX NUT (4)
EYE BOLT (2)
S-HOOK (2)