Da-Lite 37036L User Manual
Tensioned Large Advantage® Electrol
Automatic Electric Projection Screen Model
®
SPECIFICATION DATA
SUGGESTED SPECIFICATIONS: projection screen(s),
(H) x (W), electrically operated 120 volt (60 Hz) not
more than 2.4 amp. with a quick connect male plug-in connector on the motor.
Shall have specially designed motor mounted inside the roller, to be three wire
with ground, quick reversal type, oiled for life, with automatic thermal overload
cutout, integral gears, capacitor and an electric brake to prevent coasting. To
have preset but adjustable limit switches to automatically stop picture surface
in the “up” and “down” positions. Junction box shall be internally integrated into
the housing making it possible to install the housing and wire to the building’s
electrical system during construction. The junction box shall contain a quick
connect connector that is mounted in the housing for easy plug-in connection
to the motorized fabric and roller assembly. The motorized fabric and roller
assembly to be installed in the case at the factory or at a later time at the job
site. The fabric roller to be of 4½" diameter (5¾" if 270" diagonal, 275" diagonal,
or 298" diagonal) metal. Screen to be designed for left or right-hand motor
HDTV (16:9) Format Dimensions
Viewing Area (H x W) Nominal Diagonal Overall Length of Case* Approx. Ship. Wt.
In. Cm In. Cm In. Cm Lbs. Kg
108" x 192" 274 x 488 220" 559 221⅛" 562 652 2 95.7
121" x 216" 307 x 549 247" 627 247⅛" 628 727 329.8
135" x 240" 343 x 610 275" 699 273⅛" 694 803 364.2
146" x 260" 371 x 660 298" 757 294⅝" 74 8 847 384.2
Wide (16:10) Format Dimensions
Viewing Area (H x W) Nominal Diagonal Overall Length of Case* Approx. Ship. Wt.
In. Cm In. Cm In. Cm Lbs. Kg
110" x 176" 279 x 447 208" 528 205⅞" 523 691 313.4
120" x 192" 305 x 488 226" 574 222⅝" 565 729 330.7
installation. Screen fabric to be seamless, lame retardant and mildew resistant
vinyl with black masking borders standard. Each side of the fabric to have tab
guide cable system to maintain even lateral tension and hold surface lat.
Custom slat bar with added weight maintains vertical tension on the screen
surface. The ends of the slat to be protected by heavy duty plastic caps
enclosing a preset adjustable mechanism for screen tensioning. Case to be
made of extruded aluminum powder coated white. End caps to be of heavy
gauge steel powder coated white. Bottom of case to have a removable access
door. Door to be of extruded aluminum powder coated white. Bottom of case
to be self-trimming, with a built-in lange around the bottom of the case. To be
complete with integrated low voltage control unit and three position control
switch with cover plate. Suitable for use in environmental air space in
accordance with section 30022 (c) of the National Electric Code, and sections
2128, 12010 (3) and 12100 of the Canadian Electrical Code, part 1, CSA C22.1.
Screen to be listed by Underwriters’ Laboratories.
Video (NTSC 4:3) Format Dimensions
Viewing Area (H x W) Nominal Diagonal Overall Length of Case* Approx. Ship. Wt.
In. Cm In. Cm In. Cm Lbs. Kg
126" x 168" 320 x 427 210" 533 199⅝" 507 594 269.4
132" x 176" 335 x 447 220" 559 208⅝" 530 620 281.2
144" x 192" 366 x 488 240" 610 226⅛" 574 672 304.8
162" x 216" 411 x 549 270" 686 251⅝" 639 744 3 37. 5
*Case length does not include lange
PRODUCT NOTES
• All surfaces will be seamless.
• All viewing surfaces are standard with black
backing except Da-Tex® and Dual Vision.
• All screens standard with 12" black drop at the
top except 270" diagonal, which has 2".
• Extra drop may alter case dimensions.
Contact Da-Lite for details.
• Overall case length dimensions +/- ¼".
• Detail dimensional drawings, wiring diagrams and
installation instructions available upon request.
• Speciications subject to change without notice.
• Custom formats and sizes available upon request.
PRODUCT VIEWS
WHEN ORDERING, MARK APPROPRIATE SELECTIONS
1. Select size from charts on the other side.
2. Select viewing surface (All Da-Lite surfaces are GREENGUARD GOLD Certiied.):
HD Progressive 0.6
HD Progressive 0.9
HD Progressive 1.1
HD Progressive 1.3
Da-Mat®
Dual Vision
High Contrast Cinema Vision
Cinema Vision
Pearlescent
Da-Tex® (Rear)
High Contrast Da-Mat®
3. Optional accessories:
Wireless Remote Control for LVC.
Radio Frequency Remote.
Radio Frequency Range
Extender available.
Infrared Remote.
Key Locking Cover Plate for LVC Switch.
220 Volt (50 Hz) Motor.
SCB100 RS232 Serial Control Board –
built in.
NET100 Ethernet-Serial Adapter
Variable
Position
Mounting
Brackets
11½"
Electrical
Junction
Box
8½"
Case Length
8½"
Finished
11"
Ceiling
Screen Roller
9⅛"
11"
Self-Trimming Flange
13⅛"
(Suggested) ½" Threaded
Rod (Not Included) Attached
to Mounting Bracket
12⁄"
11⁄"
Audience
Side
A BRAND OF MILESTONE AV TECHNOLOGIES
www.milestone.com
P 800.622.3737 / 574.267.8101
F 877.325.4832 / 574.267.7804
E info@da-lite.com
In British Columbia, Milestone AV Technologies ULC carries on business as
MAVT Milestone AV Technologies ULC.
©2016 Milestone AV Technologies. DL0197 (Rev. 4) 01.17.
Da-Lite is a registered trademarks of Milestone AV Technologies. All other
brand names or marks are used for identiication purposes and are
trademarks of their respective owners. All patents are protected under
existing designations. Other patents pending.
Self-Trimming
Flange
2
⁄
"
Access Door
10
⁄
"
Project Name:
Architect: Phone:
Contractor: Phone:
Supervisor: Phone:
Supplier: Date:
Revised: