Page 1
Large Advantage® Electrol
Automatic Electric Projection Screen
®
SPECIFICATION DATA
SUGGESTED SPECIFICATIONS: projection screen(s),
(H) x (W), electrically operated 120 volt (60Hz), not
more than 2.4 amp with a quick connect male plug-in connector on the motor.
Shall have specially designed motor mounted inside the roller, to be three wire
with ground, quick reversal type, oiled for life, with automatic thermal overload
cutout, integral gears, capacitor and an electric brake to prevent coasting. To
have preset but adjustable limit switches to automatically stop picture surface
in the “up” and “down” positions. Junction box shall be internally integrated into
the housing making it possible to install the housing and wire to the building’s
electrical system during construction. The junction box shall contain a quick
connect connector that is mounted in the housing for easy plug-in connection
to the motorized fabric and roller assembly. Rigid metal roller, to be at least 5¾"
in diameter (on screens 14' to 18' wide) or 7" in diameter (on screens where
either height or width equal or exceed 20'). The motorized fabric and roller
assembly to be installed in the case at the factory or at a later time at the job
Video (NTSC 4:3) Format Dimensions (2" Standard Black Drop at Top)
Viewing Area (H x W) Nominal Diagonal Overall Length of Case* Approx. Ship. Wt.
In. Cm In. Cm In. Cm Lbs. Kg
123" x 164" 312 x 417 210" 533 183½" 466 553 250.8
141" x 188" 358 x 478 240" 610 207½" 527 627 284.4
159" x 212" 404 x 538 265" 673 231½" 588 702 318.4
177" x 236" 450 x 599 295" 74 9 255½" 649 780 353.8
HDTV (16:9) Format Dimensions (2" Standard Black Drop at Top)
Viewing Area (H x W) Nominal Diagonal Overall Length of Case* Approx. Ship. Wt.
In. Cm In. Cm In. Cm Lbs. Kg
106 x 188 269 x 478 216 549 207½" 527 616 279.4
119 x 212 302 x 538 243 617 231½" 588 688 312.1
133 x 236 338 x 599 271 688 255½" 649 793 359.7
site. Roller mounting brackets to be adjustable to allow centering or ofsetting
of the screen within the case. Screen to be designed for left or right-hand
motor installation. Screen fabric to be lame retardant and mildew resistant
iberglass with black masking borders standard. Bottom of fabric shall be
formed into a pocket holding a metal rod. Heavy duty plastic caps shall protect
the ends of the rod. Case to be made of extruded aluminum powder coated
white. End caps to be of heavy gauge steel, powder coated white. Bottom of
case to have a removable access door. Door to be of extruded aluminum
powder coated white. Bottom of case to be self-trimming, with a built-in lange
around the bottom of the case. To be complete with a three-position control
switch and cover plate. Suitable for use in environmental air space in
accordance with section 30022 (c) of the National Electric Code, and sections
2128, 12010 (3) and 12100 of the Canadian Electrical Code, part 1, CSA C22.1.
Screen to be listed by Underwriters’ Laboratories.
Wide (16:10) Format Dimensions
Viewing Area (H x W) Nominal Diagonal Overall Length of Case* Approx. Ship. Wt.
In. Cm In. Cm In. Cm Lbs. Kg
110" x 176" 279 x 447 208" 528 195½" 497 631 286.2
117½" x 188" 283 x 478 222" 564 207½" 527 662 300.3
Square Format Dimensions (Screens With ^ Have 2" Standard Black Drop at Top)
Viewing Area (H x W) Overall Length of Case* Approx. Ship. Wt.
In. Cm In. Cm Lbs. Kg
10'6" x 14'^ 320 x 427 183½" 466 554 251. 3
14' x 14' 427 x 427 183½" 466 565 256.3
12' x 16'^ 366 x 488 207½" 527 628 284.9
16' x 16' 488 x 488 207½" 527 637 288.9
13'6" x 18'^ 411 x 549 231½" 588 702 318.3
18' x 18' 549 x 549 231½" 588 721 327.0
15' x 20'^ 457 x 610 255½" 649 810 36 7.4
20' x 20' 610 x 610 255½" 649 834 378.3
16'6" x 22'^ 503 x 671 279½" 710 891 404.2
22' x 22' 671 x 671 279½" 710 920 417. 3
18' x 24'^ 549 x 732 303½" 771 973 441.3
*Case length does not include lange
Page 2
PRODUCT NOTES
(black or white)
(black or white)
• Matte White: Horizontal seam required when both
dimensions exceed 16'.
• Overall case length dimensions +/- ¼" (6mm)".
• Detail dimensional drawings, wiring diagrams and
installation instructions available upon request.
• Speciications subject to change without notice.
• Custom formats and sizes available upon request.
WHEN ORDERING, MARK APPROPRIATE SELECTIONS
1. Select size from charts on the other side.
2. Select viewing surface (All Da-Lite surfaces are GREENGUARD GOLD Certiied.):
Matte White
3. Optional accessories:
Extra Drop available to lower picture area
more than normal. Specify total drop at
top _____ (black or white) or at bottom
_____ (black or white). 22' maximum total
surface height including picture area
except for 24' wide, where maximum
drop is 18'.
Single Motor Low Voltage Control (LVC) –
external.
Single Motor Low Voltage Control (LVC) –
built-in.
Wireless Remote Control for LVC.
Radio Frequency Remote.
Radio Frequency Range
Extender available
Infrared Remote.
Key Locking Cover Plate for 120V
or LVC Switch.
Key Operated Switch for 120V only
(NOTE: Cannot be used with LVC).
No Borders (Black masking borders
standard).
220 Volt (50 Hz) Motor.
Video Projector Interface Control –
external.
SCB100 RS232 Serial Control Board –
built in.
NET100 Ethernet-Serial Adapter
SCB100 RS232 Serial Control Board –
external.
NET100 Ethernet-Serial Adapter
SUGGESTED METHODS OF INSTALLATION
Variable
Position
Mounting
Brackets
11½"
Electrical
Junction
Box
8½"
Case Length
11"
8½"
Finished
Ceiling
Screen Roller
9⅛"
11"
Self-Trimming
Flange
13⅛"
(Suggested) ½"
Threaded Rod (Not
Included) Attached To
Mounting Bracket
12¼"
11½"
11½"
Audience
Side
A Milestone AV Technologies Brand
3100 North Detroit Street
Warsaw, Indiana 46582
P: 574.267.8101 or 800.622.3737
F: 574.267.7804 or 877.325.4832
E: info@da-lite.com
www.da-lite.com
DL–0190 11.13
© 2013 Milestone AV Technologies LLC. Printed in U.S.A.
Self-Trimming
Flange
2⁄"
10⁄"
Access Door
Project Name:
Architect: Phone:
Contractor: Phone:
Supervisor: Phone:
Supplier: Date:
Revised:
Loading...