Da-Lite 36611 Instructions

The Da-Lite Difference.

Installation Instructions for

PRESENTATION DRAPERY

DA-LITE SCREEN COMPANY, INC.

3100 North Detroit Street
Post Office Box 137
Warsaw, Indiana 46581-0137
Phone: [phone]
800-622-3737
Fax: [phone]
Toll Free Fax: [phone]
www.da-lite.com
e-mail: [e-mail]

TO ATTACH PRESENTATION DRAPERY

1. Unfold valance bar and lock all latches.

2. Attach valance bar to screen frame by sliding the U shaped dress up hanger onto the shoulder rivets protruding from
the screen frame. Attach valance drape to valance bar.

3. Attach wing bars to valance bar by sliding the U shaped dress up hanger onto the shoulder rivets protruding from the
valance bar. Note the color coded tape. Attach wing drapes to wing bars. Observe stage left and stage right markings.

3A. If valance bar cannot be used, wing bars can be attached to screen frame. Fold wing drapes under at the floor.

4. Attach skirt by snapping onto the buttons on the bottom of screen surface.

5. If drapery kit has adjustable skirt bar, unfold skirt bar and lock all latches, attach U shaped hanger onto dress up rivets
protruding from the screen frame near the bottom. To adjust skirt bar, loosen the two black knobs and slide skirt bar up
to desired height.

5A. Screen may be lowered when skirt bar is raised, so that skirt will be near floor level.

6. For screens 10' and wider with adjustable skirt bar, a steady rest is provided. The steady rest should be placed in the
center of the adjustable skirt bar to prevent it from sagging.

7. Dry clean only.

WING

VALANCE

STEADY REST

SCREEN

VALANCE BAR

WING BAR

SEE DETAILED VIEW

ADJUSTABLE
SKIRT BAR

WING

Printed in U.S.A. 79471 Rev. 1/08

SKIRT