Da-Lite 35269, 35283E User Manual
Tensioned Professional Electrol
Automatic Electric Projection Screen Model
®
SPECIFICATION DATA
SUGGESTED SPECIFICATIONS: projection screen(s),
(H) x (W), electrically operated 120 volt (60Hz) not more
than 2.4 amp. Shall have specially designed motor mounted inside the roller, to
be three wire with ground quick reversal type, oiled for life, with automatic
thermal overload cut-out, integral gears, capacitor and an electric brake to
prevent coasting. To have pre-set but adjustable limit switches to automatically
stop picture surface in the “up” and “down” positions. The roller to be of 4½"
diameter aluminum. Roller to be mounted in one heavy duty bracket
equipped with self-aligning bearing. Motor to be secured to the case with a
steel motor mount bracket. Screen fabric to be lame retardant and mildew
resistant vinyl with black masking borders standard. Each side of fabric to have
HDTV (16:9) Format Dimensions
Viewing Area (H x W) Nominal Diagonal Overall Length of Case Approx. Ship. Wt.
In. Cm In. Cm In. Cm Lbs. Kg
92" x 164" 234 x 417 188" 478 185¾" 472 315 142.9
108" x 192" 274 x 488 220" 559 215¼" 547 350 172.4
121" x 216" 307 x 549 247" 627 241¼" 613 430 195.5
135" x 240" 343 x 610 275" 699 267¼" 67 9 810 368.2
146" x 260" 372 x 660 298" 757 288¾" 733 875 397.7
Video (NTSC 4:3) Format Dimensions
Viewing Area (H x W) Nominal Diagonal Overall Length of Case Approx. Ship. Wt.
In. Cm In. Cm In. Cm Lbs. Kg
108" x 144" 274 x 366 180" 457 167¼" 425 301 136.5
120" x 160" 305 x 406 200" 508 184¾" 469 306 138.8
126" x 168" 320 x 427 210" 533 193¾" 492 315 142.9
132" x 176" 335 x 447 220" 559 202¾" 515 320 145.2
144" x 192" 366 x 488 240" 610 220¼" 559 380 172.4
162" x 216" 411 x 549 270" 686 245¾" 624 430 195.5
a tab guide cable system to maintain even lateral tension and hold surface lat.
Bottom of fabric to be inserted into a custom aluminum slat bar with added
weight to provide vertical tension on the screen surface. The ends of the slat
to be protected by heavy duty plastic caps enclosing a preset adjustable
mechanism for screen tensioning. Case to be of wood, with double top for
extra rigidity and strength. Case to be inished with a black primer coat, ready
to accept inal inish by others, heavy metal brackets shall be supplied for
mounting screen to ceiling or wall. To be complete with 3 position control
switch with cover plate. Screen to be listed by Underwriter’s Laboratories.
PRODUCT NOTES
• All viewing surfaces will be seamless.
• All viewing surfaces are standard with black
backing except Da-Tex® and Dual Vision.
• All screens standard with 12" black drop at the top
(except 270" diagonal).
• Extra drop may alter case dimensions.
Contact Da-Lite for details.
• Overall case length dimensions +/- ¼" (6 mm).
• Detail dimensional drawings, wiring diagrams and
installation instructions available upon request.
• Speciications subject to change without notice.
• Custom formats and sizes available upon request.
WHEN ORDERING, MARK APPROPRIATE SELECTIONS:
1. Select size from charts above:
2. Select viewing surface (All Da-Lite surfaces are GREENGUARD GOLD Certiied.):
Da-Mat® Dual Vision
High Contrast Da-Mat® Da-Tex® (Rear)
3. Options:
220 Volt (50 Hz) Motor. White box (black standard).
4. Optional Accessories:
Single Motor Low Voltage Control
System (LVC) – external.
Wireless Remote Control for LVC.
Radio Frequency Remote.
Radio Frequency
Range Extender
Infrared Remote.
Key Locking Cover Plate for 120V or LVC
Switch.
Key Operated Switch for 120V only
(NOTE: Cannot be used with LVC).
Video Projector Interface Control -
external.
External SCB100 - RS232 Serial
Control Board.
NET100 Ethernet-Serial
Adapter.
PRODUCT VIEWS SUGGESTED METHOD OF INSTALLATION
Reinforced
Motor End
Electrical
Outlet Box
Top
91⁄2"
115⁄16"
Ceiling Type Hanger
Picture
Surface
2"
1"
2⅞"
14⅜"
o
/
11⅜"
Wall Or Ceiling Mount With Hangers
Wall type hangers and ceiling type hangers are standard
equipment. One set is supplied with each screen. Useful for
recessed installations.
¾"
9½"
Wall Type Hanger
o
/
⁄"
o
/
14⅜"
Picture
Surface
⅞"
2" Moulding
Picture Surface
1" x 3" Cleat
Ceiling Mount
Without Hangers
Screen case is placed lush with the
wall and ceiling and held in position
by moulding securely attached to
the wall.
Rafters
Picture
Surface
Recessed Above Ceiling
Other methods of installation will
suggest themselves in new buildings
where it would be an easy matter to
provide a recess for the screen to
conceal it when not in use.
Do not seal in–allow access.
A BRAND OF MILESTONE AV TECHNOLOGIES
www.milestone.com
P 800.622.3737 / 574.267.8101
F 877.325.4832 / 574.267.7804
E info@da-lite.com
In British Columbia, Milestone AV Technologies ULC carries on business as
MAVT Milestone AV Technologies ULC.
©2018 Milestone AV Technologies.DL0244 (Rev. 3) 02.18.
Da-Lite is a registered trademarks of Milestone AV Technologies. All other
brand names or marks are used for identiication purposes and are
trademarks of their respective owners. All patents are protected under
existing designations. Other patents pending.
For Exposed Installation
If the screen is to be mounted in an exposed position, it may be covered with inished plywood,
veneer, paneling, plastic wall covering or a valance.
Project Name:
Architect:
Contractor: Phone:
Reseller: Phone:
Loading...