Da-Lite 34726, 34730 Installation Guide
The Da-Lite Difference.
Operating Instructions for
MODEL C WITH CSR
(Controlled Screen Return)
DA-LITE SCREEN COMPANY, INC.
3100 North Detroit Street
Post Office Box 137
Warsaw, Indiana 46581-0137
Phone: 574-267-8101
800-622-3737
Fax: 574-267-7804
Toll Free Fax: 877-325-4832
www.da-lite.com
e-mail: info@da-lite.com
Model C with CSR (Controlled Screen Return) is a
feature offered exclusively by Da-Lite to assist the quiet
controlled return of the screen into the case.
YOU HAVE MADE A WISE SELECTION…
in choosing a Da-Lite projection screen, designed and engineered to produce the sharpest,
most pleasing pictures with maximum convenience.
WALL MOUNTING
1. Select fasteners of proper type for wall or ceiling involved.
2. Insert fasteners through proper openings provided in back side of end caps.
3. Attach screen securely to studding or other solid surface - never to plaster only.
4. MAKE SURE SCREEN IS MOUNTED LEVEL.
CEILING MOUNTING
1. Heavy screw hooks may be installed into wood joists. Other types of hooks or chain may be used for other ceilings or
for stage installations.
2. Insert hooks or chain through proper openings provided in sides of end caps. Screen must hang so that flat back of
case is perpendicular to floor.
3. MAKE SURE SCREEN IS MOUNTED LEVEL.
TO OPEN SCREEN
Pull down on pull bail until desired picture area is obtained. Lock into position as on a window shade. Be sure surface is
locked before releasing.
NOTE: This screen will not lock into position in the upper portion of its travel.
TO RE-ROLL YOUR PICTURE SURFACE
The Model C operates on the same principle as a window shade. Pull down about 4 inches to disengage the locking dog
and start the fabric up firmly and quickly.
Large picture surfaces are heavy and will start up too slowly to prevent the locking dog from catching unless help is
provided, so keep picture surface moving briskly.
Should the locking dog catch, pull the picture surface down about 4 inches and start the surface up rapidly.
The CSR feature of this screen will allow the screen to stop, as normal, in the bottom portion of its travel. The screen will
not stop in the top portion of its travel, but will continue slowly and gently into the case.
To view an online Model C with CSR retraction tutorial, please visit http://www.da-lite.com/products/product_flash/modelc_csr/.
PROTECT YOUR SCREEN
Before re-rolling surface into case, examine both front and back of surface to be sure they are free of foreign matter.
1
Loading...