Dakota Ultrasonics UMX-2 Specifications

D A K O T A U L T R A S O N I C S
The
The
UMX-2
UMX-2
Underwater Material &
Underwater Material &
Coating Thickness Gauge
Coating Thickness Gauge
Captures an A-Scan waveform snapshot with every measurement; viewable using our Windows PC interface software.
HIGHLIGHTS:
1000 ft. (300 m) depth rating.
Probe types: Single Membrane
& Dual Element.
Measurement modes: Pulse-Echo,
Pulse-Echo w/Coating, Echo-Echo, Triple-Echo (TCG).
Data Storage: Alpha numeric &
Sequential w/ID.
Windows PC software included.
3 year limited warranty.
S O U N D S O L U T I O N S
UMX-2 SPECIFICATIONS
Physical
Size:
Length (9.0 in/229 mm). Diameter (2.375 in/60.33 mm).
Weight:
1.5 lbs (0.680 kg) with 3 AA batteries.
keyboard:
Single button, magnetically coupled switch.
Operating Temperature:
-20 to 140F (-29C to 60C).
Underwater Case:
High strength transparent plastic housing. Depth rating of 1000 feet (300 meters).
Data Output:
Bi-directional RS232 serial port, with USB converter. Windows® PC inter- face software.
Display:
1/2 in (12.7 mm) 4.5 digit LCD display. 3/8 in (9.5 mm) 6 alpha LCD display. Both displays backlit (on/ o/auto).
LED Lighting: 8 blue leds (on/o).
Ultrasonic Specications
Measurement Modes:
Dual Element Probes
Pulse-Echo (P-E): Coating O.
Pulse-Echo Coating (PECT): Coating
On.
Echo-Echo (E-E): Thru-Paint.
Single Element Probes
Triple-Echo (TCg): Thru-Paint.
Pulser: Dual square wave pulsers.
Receiver:
Dual receivers - manual or AGC gain control with 100 dB range.
Manual gain: Limited to 5 gain set­tings (vlow, low, med, high, vhigh (42 to 50 dB).
AGC: Automatic gain setting.
Timing:
Precision 25 MHz TCXO with single shot 100 MHz 8 bit ultra low power digitizer.
ickness Gauge
Power Source
Three 1.5V alkaline or 1.2V NiCad AA cells.
Typically operates for 50 hours on alka­line and 20 hours on NiCad (backlight o). 15 hours on alkaline and 8 hours on Nicad (backlight on).
Auto power o if idle 5 min.
Battery status displayed on power up.
Measuring
Pulse-Echo Mode (P-E) - (Pit & Flaw De-
tection) measures from 0.025 to 19.999 inches (0.63 to 508 millimeters).
Pulse-Echo Coating Mode (PECT) ­(Material, Coating, Pit & Flaw Detection): Material: 0.025 to 19.999 inches (0.63 to 508 millimeters). Coating: 0.001 to 0.100 inches (0.01 to 2.54 millimeters).
Echo-Echo Mode (E-E) - (Thru Paint & Coatings) measures from 0.100 to 4.0 inches (2.54 to 102 milli- meters). Will vary based on coating.
Triple-Echo (TCg) - 0.040 to 6.00 (1 to 152 millimeters) inches in steel. Range will vary based on coating thick­ness, material type, and probe.
Resolution:
+/- 0.001 inches (0.01 mm).
Units:
English & Metric
Velocity Range:
0.0492 to 0.5510 in/us 1250 to 13995 meters/sec
8 xed and 1 programmable Material Velocities (in/us):
1. Aluminum 2024 .251
2. Steel 4340 .233
3. Stainless Steel 302 .223
4. Iron .232
5. Cast Iron .180
6. PVC .094
7. Polystyrene .092
8. Polyurethane .070
9. Custom User
Computer Interface
RS232 serial interface. PC software & USB converter cable included.
Display
Segmented Displays:
4.5 Digit LCD - Primary measurement display.
6 Character LCD - Displays menu op­tions.
Repeatability Bar graph - Bar graph indicates stability of reading.
Data Storage
File Formats:
Grid (alpha numeric). Sequential (auto identier).
Programming: Storage capacity of 1 le template. Size and dimension specied by the user.
Storage capacity: 5,000 readings, set­tings, and waveform graphics.
Memory:
32 megabit non-volatile ram.
Transducer
Auto Probe Zero: Applies to dual
element probes only.
Transducer Types
Dual Element: 1 to 10 MHz frequen- cy
range. Custom auto recognition probes. (aw & pit detection).
Single Element: 1 to 10 MHz frequency range - (General purpose).
LEMO underwater connectors.
Standard 4 foot cable.
Custom transducers and cable lengths available for special applications.
Certication
Factory calibration traceable to NIST & MIL-STD-45662A.
IP68 rating
Warranty
3 year limited.
MADE IN THE USA
Distributed by:
DAKOTA ULTRASONICS
1500 Green Hills Road, #107 Scotts Valley, CA 95066
Ph: (831) 431-9722 Fax: (831) 431-9723 Website: www.dakotaultrasonics.com Email: info@dakotaultrasonics.com
Loading...