Dakota Digital VLK-49F, VLC-49F Installation Manual

2X 8-18 x 3/4” Screws

CAT5 Cable

VLK Clock

Installation Manuals

1. Remove the original clock by

VLC Clock

Or

Your new VLC\VLK-49F kit includes:

VLC\VLK-49F

Dakota Digital Clock Installation

For 1949-‘50 Ford cars

Installation

disconnecting the wiring and removing
two screws behind the dash.

(VLC & VLK)

VLK Switch Harness

VLC Power Harness

(VLC & VLK)

Manual # 650420A

2. Orientate the VLK clock (as shown) with

3. Connect the CAT5 cable and switch harness or power harness to the clock and carefully

the CAT5 cable jack towards the top, or
the VLC clock with the hands at 12:00
facing upward. Secure the clock to the
dash using the two supplied screws.

route these back to the VHX control box and refer to the Operating Manual to complete the
clock setup.

st

4510 W. 61

St. N., Sioux Falls SD 57107

Phone: [phone] Fax: [phone]

www.dakotadigital.com

[e-mail]

Manual # 650420A