Dakota Alert RE-4k Plus User Manual

Wireless
Receiver

RE-4k Plus

USER GUIDE

www.dakotaalert.com

TM

Dakota Alert®

WIRELESS SECURITY EQUIPMENT

OVERVIEW

Terminals

Bottom

Power adapter jack

Front

Speaker

Volume button

Back

2

LEDs

Mode button

DIP switches

Mounting holes

PACKAGE CONTENTS

• RE-4k Plus receiver

• Power adapter

• User Guide

POWERING YOUR RECEIVER

1. Connect the power adapter to the jack in the bottom of the receiver.

2. Plug the power adapter into an AC outlet.

Bottom

Power adapter

3

SETTING UP YOUR RECEIVER

“Basic Setup” lets you choose the tune and LED settings you want for Dakota Alert 4000 Series
transmitters. In addition to tune and LED settings, “Advanced Setup” lets you set up exterior
sensors using the Relay 1, Relay 2, and the 12 VDC terminals.

BASIC SETUP

Note: You can connect up to 16 Dakota Alert 4000 Series transmitters to your receiver.

1. Place your receiver and transmitter(s) next to each other.

Note: Be careful not to activate your transmitter until you select the tune you want. If you do
accidentally activate the transmitter on the wrong tune, reselect a tune and reactivate the transmitter.

2. Press and hold the MODE button for three seconds until all LEDs  ash and start blinking
slowly.

3. Press the (volume) button repeatedly until you  nd the tune you want to sound when a
transmitter is activated.

1 Ding Dong (high) 5 Alarm/Siren 9 William Tell 13 Beep (high)

2 Ding Dong (low) 6 Coo Coo Clock 10 Canon in D 14 Beep (low)

3 Westminster 7 Bird Chirping 11 Morning 15 Beep, Beep

4 Fur Elise 8 Twinkle

Twinkle

4

12 Toreador

March

16 Beep, Beep,

Beep, Beep