Dakota LAT-NR100 User Manual

INSTALLATION INSTRUCTIONS

LAT-NR100

LED Tail Lights for 1967-68 SS and 1970-73 Camaro.

MAN# 650153

Kit Includes:

Installation: 67-68 SS Camaro 70-73 Camaro

1. Remove the tail light assembly from the vehicle by removing the original bulb sockets from the
housing. Then remove the housing hardware so it can be removed from the car. Remove the
housings from the vehicle carefully so the housing to body gaskets are not damaged.

2. Next remove the lens.
The 67-68 Camaro has six screws that hold the housing halves together which will need to be

removed to gain access to lens.

The 70-73 Camaro lens has tabs locking it into the plastic housing. Pry the tabs gently with a

screwdriver to remove lens.

MAN# 650153

3. Now is a good time to clean the lens and housing. If lenses are in bad shape a new set is
recommended.
If you are installing this kit into a 67-68 Camaro skip ahead to step 5. For the 70-73 Camaro,
some of the hardware will need to be changed out for proper mounting bracket

4. Changing the inst all ed 67-68 mount bracket to the 70-73 mounting brack et.

a. Note how the current assembly is attached and notice how the wires are routed for re-

assembly. ENSURE THE WIRES ARE NOT PINCHED IN THE NEW ASSEMBLY.

b. Remove the screw at the back of the LED assembly; it is a 5/8” 6-32 machine screw.

This will remove the mounting bracket that will need to be changed.

c. Locate the supplied longer mount bracket and reattach using the shorter supplied 1/2”

6-32 machine screw. The shorter screw must be used since the taller mount is thinner.
Tighten the screw down in the center of the slot. The LED assembly can be moved up
or down to adjust the height of the light.

d. Note: NOT FOLL OWING THESE STEPS CAN DAMAGE THE CIRCUIT BOARD!

1967-1968 Camaro mount 1970-1973 Camaro mount 1970-1973 Camaro LED Assembly

5. Remove the mounting plate from the bot tom of the assembly which is attached with two 3/8” 6­32 machine screws.

6. Pass the wires through the tail light housing where the original bulb and socket were.

MAN# 650153