Dake SE-5X8 Instructional Manual

Phone: [phone]

www.dakecorp.com

DAKE PORTABLE BANDSAW

SE-5X8

INSTRUCTIONAL MANUAL

WARNING!

Read and understand all instructions and responsibilities before operating. Failure to follow
safety instructions and labels could result in serious injury.

Dake Corporation

724 Robbins Road
Grand Haven, MI 49417

Fax: [phone]

[e-mail]

Dake Corporation

724 Robbins Road

Grand Haven, MI 49417

www.dakecorp.com

TABLE OF CONTENTS

DAKE STANDARD LIMITED WARRANTY ............................................................ 2

RETURN & REFUND POLICY .............................................................................. 4

SPECIFICATIONS ................................................................................................ 5

INTRODUCTION AND USE .................................................................................. 6

WARNING STICKERS – INDICATIONS .......................................................... 7

TYPE OF USE INTENDED .......................................................................... 7

GENERAL SAFETY REGULATIONS ........................................................... 8

MAIN MACHINE COMPONENTS ....................................................................... 10

INSTALLATION ................................................................................................... 11

ELECTRICAL CONNECTION .................................................................... 12

ADJUSTMENTS .................................................................................................. 12

ADJUSTING BLADE TENSION ................................................................. 12

CUTTING ANGLE-HEAD ROTATION ADJUSTMENT ............................... 13

ADJUSTING THE SLIDING BLADE GUIDE POSITION ............................. 13

BLADE SPEED ADJUSTMENT ................................................................. 13

POSITIONING OF THE WORKPIECE IN THE VISE ................................. 13

INSTALLATION AND ADJUSTMENT OF BANDSAW STOCK STOP ........ 14

OPERATIONS ..................................................................................................... 14

USE AS A MANUAL CUTTING SAW ......................................................... 14

MAINTENANCE - STORAGE - ASSISTANCE - DISPOSAL ............................... 15

REPLACING SAW BLADE ......................................................................... 15

LUBRICATION / COOLANT ....................................................................... 16

CLEANING ................................................................................................. 16

TROUBLESHOOTING ........................................................................................ 17

EXPLODED VIEWS & PART LIST ...................................................................... 18

ORDERING INFORMATION ............................................................................... 21

ELECTRICAL COMPONENTS ............................................................................ 22

1 REV032019

Dake Corporation

724 Robbins Road

Grand Haven, MI 49417

www.dakecorp.com

DAKE STANDARD LIMITED WARRANTY

Finished Machines

Dake warrants to the original purchaser the finished machine manufactured or distributed by it to
be free from defects in material and workmanship under normal use and service within 1 year
(12 months) from the delivery date to the end user.

Parts & Couplings

Dake warrants to the original purchaser the component part or coupling manufactured or
distributed by it to be free from defects in material and workmanship under normal use and
service within 30 days from the delivery date to the end user.
The standard limited warranty includes the replacement of the defective component part or
coupling, at no cost to the end user.

Warranty Process

Subject to the conditions hereinafter set forth, the manufacturer will repair or replace any portion
of the product that proves defective in materials or workmanship. The manufacturer retains the
sole right and option, after inspection, to determine whether to repair or replace defective
equipment, parts or components. The manufacturer will assume ownership of any defective
parts replaced under this warranty.

All requested warranty claims must be communicated to the distributor or representative
responsible for the sale. Once communication has been initiated, Dake Customer Service must
be contacted for approval:

Phone: [phone]

Email: [e-mail]

When contacting Dake, please have the following information readily available:

- Model #

- Serial #

- Sales Order #

Purchasers who notify Dake within the warranty period will be issued a Case number and/or a
Return Material Authorization (RMA) number. If the item is to be returned per Dake’s request,
the RMA number must be clearly written on the exterior packaging. Any item shipped to Dake
without an RMA will not be processed.

2 REV032019

Grand Haven, MI 49417

Warranty Exceptions:

The following conditions are not applicable to the standard limited warranty:

(a) Part installation or machine service was not completed by a certified professional, and

is not in accordance with applicable local codes, ordinances and good trade practices.

(b) Defects or malfunctions resulting from improper installation or failure to operate or

maintain the unit in accordance with the printed instructions provided.

(c) Defects or malfunctions resulting from abuse, accident, neglect or damage outside of

prepaid freight terms.

(d) Normal maintenance service or preventative maintenance, and the parts used in

connection with such service.

(e) Units and parts which have been altered or repaired, other than by the manufacturer

or as specifically authorized by the manufacturer.

(f) Alterations made to the machine that were not previously approved by the

manufacturer, or that are used for purposes other than the original design of the
machine.

Dake Corporation

724 Robbins Road

www.dakecorp.com

3 REV032019

Dake Corporation

724 Robbins Road

Grand Haven, MI 49417

www.dakecorp.com

RETURN & REFUND POLICY

Thank you for purchasing from Dake! If you are not entirely satisfied with your purchase, we are
here to help.

Returns

All Dake manufactured / distributed machines, parts and couplings include a 30-day return
option. These policies are valid from the date of final shipment to the end user.

To be eligible for a return, the item must be unused and in the same condition as received.

All requested warranty claims must be communicated to the distributor or representative
responsible for the sale. Once communication has been initiated, Dake Customer Service must
be contacted for approval:
Phone: [phone]
Email: [e-mail]

Once the return request has been approved by Customer Service, a representative will supply a
Return Material Authorization (RMA) number. The returned item must have the provided RMA
number clearly marked on the outside packaging. Any item received without an RMA number
clearly visible on the packaging will not be processed.
An RMA number can only be provided by the Dake Customer Service team and must be
obtained prior to the return shipment.

Refunds

Once the item has been received and inspected for damages, a representative will notify the
requestor referencing the provided RMA number.

If the return is approved, a refund will be issued to the original method of payment, less a 20%
restocking fee. The restocking fee may be waived if an order is placed at the time of return with
like-value merchandise.

Transportation costs are the responsibility of the end user and will not be credited upon return
approval.

Any item that is returned after the initial 30 days or has excessive/obvious use will not be

considered for a full refund.

4 REV032019

Grand Haven, MI 49417

SPECIFICATIONS

Machine Type Portable mitering gravity fed horizontal bandsaw

Blade Size 68-1/4” x 1/2”

Blade Speed – Low Range 114 - 262 FPM

Horsepower 2.5 H.P. maximum

Weight 60 pounds

Overall Height 20 inches

Base Width 18 inches

Depth 39 inches

Dake Corporation

724 Robbins Road

www.dakecorp.com

Round Capacity @ 0° 6 inches

Round Capacity @ 45° 4 inches

Square Capacity @ 0° 6 inches

Square Capacity @ 45° 4 inches

Rect. Capacity @ 0° 6 X 5 inches

Rect. Capacity @ 45° 4-3/4” X 4 inches

In the space provided record the serial number and model number of the machine. This
information is only found on the black Dake tag shown below. If contacting Dake this information
must be provided to assist in identifying the specific machine.

5 REV032019

Dake Corporation

724 Robbins Road

Grand Haven, MI 49417

www.dakecorp.com

INTRODUCTION AND USE

The Use and Maintenance Manual is made up of two parts, this document and the additional
parts and diagrams. Save this manual for future use.

Keep the Use and Maintenance Manual in good condition: Remember, it is an integral part of
the machine. Always refer to the manual to get best machine performance in maximum safety
while performing the operations described therein.

It is recommended that this manual be kept in an easily accessible place, near the machine, at
all times so that it can be consulted whenever necessary.

DANGER - WARNING

USE THE MACHINE SOLELY AND EXCLUSIVELY FOR THE USES INDICATED AND IN
ACCORDANCE WITH THE RECOMMENDATIONS PROVIDED IN THIS MANUAL.

NEVER TAMPER WITH IT, FORCE IT OR USE IT IN ANY INAPPROPRIATE MANNER.

HOW TO CONSULT THIS MANUAL AND THE SYMBOLS USED

Please pay particular attention to the words “WARNING”, “DANGER”, and “CAUTION" as used
in this manual.

To draw the user’s attention to certain information and provide warning messages, the
operations described in this manual are accompanied by symbols and notes to highlight the
presence of any hazards and indicate the safe use of the equipment.

DANGER - WARNING: IMPORTANT INFORMATION CONCERNING GENERAL

SAFETY.

DANGER-CAUTION: highlights situations where careful and sensible actions are

essential.

NOTES: information of a technical nature.

6 REV032019