Dake MB100 User Manual

Grand Haven, Michigan 49417
616-842-7110 Phone [phone]
616-842-0859 Fax [phone]
Web: www.dakecorp.com
E-mail: [e-mail]

[e-mail]

724 Robbins Road

Dake Tube Bender Manual

Instructions and part list

Manually operated

Dake Tube Bender Manually operated 08212009 1

Thank you for buying Dake!!!!

We hope you enjoy many years of using your New Dake Tube Bender. If after reading
this manual you still have any questions please give us a call, e-mail or stop by for a
factory tour.

www.dakecorp.com

724 Robbins Road
Grand Haven, MI 49417
Phone: [phone]

CAUTION!!!

Read and understand all warnings, cautions, attentions and instructions before operating

this equipment.

CAUTION general

When working always pay attention and be alert. Be careful. Be aware of possible
Hazards.

CAUTION regulations

Observe the law and regulations. Check local regulations to properly dispose of oil and/or items
that have been in oil to dispose of properly.

ATTENTION tools

Always check that your tools are in good condition and that the tools are suitable for the work to
make (ex. don’t use the pliers as hammers etc.)

ATTENTION tampering

It is severely forbidden to modify or to tamper with parts that can alter the
standard working conditions.

CAUTION operator

For no reason whatsoever must the operator have their hands in the area of the piece being bent
during the pressing operation.

According to new legislation, the employer will have to check that the
operator has understood these notices.

THIS MACHINE IS DESTINED ONLY FOR THE USE IT HAS BEEN DESIGNED
FOR, ANY OTHER USE IS TO BE CONSIDERED IMPROPER AND
THEREFORE THE MANUFACTURER CANNOT BE HELD LIABLE FOR ANY
DAMAGE CAUSED BY ANY IMPROPER USE OR USE NOT EXPRESSLY
MENTIONED IN THIS USER’S MANUAL.

Dake Tube Bender Manually operated 08212009 2