Page 1
Item
Part Name
Part Number
1
Handle 128
2
Retaining ring (National lock washer number XRC-327)
43965
3
3/8”-16 x ¾” thumb screw
43622
4
Spindle 129
5
Retaining ring
67424
6
Ram (1” x 1” x 12”)
127
7
3/8”-16 x 5/8” headless set screw
43589
8
Brake spring
108
9
Tinners rivet
43577
10
Ram cap
122
11
5/16”-18 x 1” hex cap screw
43315
12
Ram cap shims (.008”)
125
13
Ram cap shims (.015”)
126
14 & 15
Table Plate assembly
700806
16
Frame 117
DAKE
Division of JSJ Corp.
724 Robbins Road
Grand Haven, MI 49417
Phone: 616-842-7110 800-937-3253
Fax: 616-842-0859 800-846-3253
E-Mail: customerservice@dakecorp.com
technicalservice@dakecorp.com
Website: www.dakecorp.com
Please contact factory for current prices.
Ordering information: Please order all repair parts by part number and name, also mention model
number of press. All parts are shipped F.O.B. Factory in Grand Haven, MI.
Lubrication: Keep all working parts of the press well oiled for easier operation. Also keep a light film
of oil over the entire surface of the ram to prevent rust.
6/24/16
Page 2
Carefully read all safety
messages in these
instructions and on your
press safety signs. Keep
safety labels in good condition.
Replace missing or damaged
safety labels.
This machine is intended
to be operated by one
person. This person should
be conscious of the press ram
movement not only for
themselves but also for persons
in the immediate area of the
machine.
Under no circumstances
increase the leverage
ratio of the press by using
a longer handle or by
placing a pipe over the
handle. Never hammer on top
of the ram.
SAFETY
This is the safety alert symbol. When you see this symbol on your press, be alert to the
potential for personal injury.
Follow recommended precautions and safe operating practices.
6/24/16
Loading...