LCD Display & TV
Operating Instructions
LCD TV
A Wide Array of Screen Settings
You can choose different screen settings depending on the type of program you are
watching or the surrounding conditions (the lighting or the outside weather conditions).
You can switch among the Sport, Movie, Music and Normal options , or you can configure
the screen settings yourself.
A Wide Array of Sound Settings
You can choose an optimal sound setting for the type of program you are watching.
You can switch among the Music, Movie, News and Normal options , or you can configure
the settings yourself.
Favorite Channel Memory
You can store your favorite channels in the order of preference for easy channel selection.
Captions
When you watch a captioned program, you can turn the caption option on to see English
text on the screen. This feature also works with video CDs or videotapes with captions.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING
AVERTISSEMENT
RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR.
´
WARNING HIGH-VOLTAGE
TO PREVENT FIRE OR SHOCK HAZARD DO NOT REMOVE COVER.
NO USER SERVICEABLE PARTS INSIDE.
REFER ALL SERVICE QUERIES TO QUALIFIED PERSONNEL.
DO NOT EXPOSE THIS RECEIVER TO RAIN OR MOISTURE.
REMOVE MAINS PLUG FROM WALL SOCKET WHEN NOT IN USE.
CARE SHOULD BE TAKEN WHEN REMOVING BACK CABINET FOR SERVICING,
SUB CHASSIS MAY BE DAMAGED IF ALLOWED TO BECOME UNSUPPORTED.
This symbol is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
This symbol is intended to alert the user to the presence of important operating
and maintenance (servicing) instructions in the literature accompanying the
appliance.
WARNING -
NOTICE
If the same pattern is continuously displayed on the Monitor / TV for a long period
of time,it can be the situation when the image “Sticks” to screen.
This apparatus shall not be exposed to dripping or splashing and no object filled
with liquids, such as vases, shall be place on the apparatus.
To reduce the risk of fire or shock hazard, do not expose the TV to rain or moisture.
Important Safety Instructions
ENGLISH
The unit should not be placed in a built-in installation such as
a book-case, limited space rack unless proper ventilation is
provided.
- This may cause fire by overheating or damage the unit by
falling.
Do not use the unit near water, oil or inflammables.
- This may cause a fire.
Do not use a damaged plug and do not let the power cord
touch a heat source.
- This may cause an electric shock or fire.
Do not connect too many extension cords or plugs to an outlet.
Do not use the unit in direct sunlight and keep it away from
heaters, stoves, and other sources of heat.
- This may cause a fire.
During storm conditions (especially when there is lighting)
unplug your TV set from the main electrical outlet
and antenna.
- This may cause a fire.
Place the unit on a flat and stable surface.
- The unit can cause injury or damage the unit by falling.
Do not place any things(vase, stc) on the top of the unit.
- This may cause the damage of the unit by falling.
Do not attempt to service the unit.
Contact an authorized dealer or repair service.
- Servicing the unit yourself may cause an electric shock or fire.
If there are any unusual sounds or smells coming from the unit,
unplug it immediately and contact an authorized
dealer or repair service.
- This may be caused by an electric shock or fire.
3
Important Safety Instructions
Do not use or store inflammable substances near the unit
- This may cause an explosion or fire.
Place the antenna away from the electric wire, not to touch even though
it falls down by wind.
- This may cause an electric shock.
Be sure to plug in tightly and hold the plug, not the cord when
disconnecting the plug from the wall outlet.
- This may cause a fire.
rain water get into the unit by bending or antenna wire sealing
Place the unit away from the wall for well ventilation.
If an outside antenna is connected to the unit, do not let the
- This may cause a fire.
Do not touch the plug with wet hands.
- This may cause an electric shock.
- This may cause an electric shock or fire.
Unplug the unit from the wall outlet before cleaning. Use a
smooth cloth. Do not use industrial chemicals.
- This may cause an electric shock or fire.
Do not touch the antenna wire and disconnect the plug from
the electrical outlet during storms or lightening.
- This may cause an electric shock or fire.
4
If the connector between the plug and the pin is dusty or dirty,
clean it. Do not spray detergent directly on the unit.
- This may cause an electric shock or fire.
Disconnect the plug from the outlet if it is not used for a long
period of time.
- This may cause an electric shock or fire.
Table of Contents
Important Safety Instructions ........................................ 3
Unpacking your TV ..............................................6
Viewing the Control Panels (Front View) .................................. 7
Viewing the Control Panels (Rear View) .................................. 8
Remote Control ................................................10
Inserting Batteries in the Remote Control ................................11
Connecting an Antenna or Cable ......................................11
Connecting to the RCA or S-Video Input (Side AV2) ..........................12
Connecting to the SCART Input ......................................12
Connecting to a DVD or DTV Set-Top Box INPUT (RCA or DVI) ....................13
Connecting the Headphones ........................................14
Connecting the Power Cord and Switching the TV On / Off ......................15
Selecting a Picture from External Sources ................................15
Selecting your Language ..........................................15
Storing Channels in Memory ........................................16
Customizing the Picture ..........................................18
Customizing the Audio ............................................19
Selecting WOW Surround ..........................................20
Selecting the Speaker Sound Source ..................................20
Listening to Stereo Sound / Dual Sound ..................................20
Setting the Date & Time ..........................................21
Setting the Preset Time ( On / Off ) ....................................22
Displaying the Current Time ........................................22
Setting Restrictions On Button Input ....................................23
Setting the OSD Display Time ........................................23
No Signal Auto Power Off ..........................................24
No Key Operation Auto Power Off ......................................24
Reducing Picture Noise ............................................24
Daitsu Engine ................................................25
Setting the Sleep Timer ............................................25
Displaying the TV Information ........................................25
Adjusting the Screen Geometry ......................................26
Setup your Screen Aspect ..........................................27
How to Watching No WSS Function ....................................27
Watching your Favorite Channels ......................................28
Factory Preset ................................................28
Display the Picture in Picture ( PIP ) ....................................29
Changing the Picture Size ..........................................31
Display a Still Image ..............................................31
Teletext Functions ..............................................32
Displaying the Teletext Information ....................................32
Selecting a Special Teletext Functions ..................................33
Connecting to the PC (DVI) ........................................34
Setting the PC Software ..........................................35
RS-232C Configurations ..........................................36
Serial Link Command ............................................36
Standard Display Mode ............................................37
Pin Configuration ..............................................38
Troubleshooting ................................................39
Specifications ................................................41
5
ENGLISH
ENGLISH
Unpacking your TV
Please make sure the following items are included with your TV set.
If any items are missing, contact your dealer.
Accessories
Remote Control & Batteries (AAA x 2)
Operating Instructions Power Cord
6
Viewing the Control Panels
Front View
Bottom Side
ENGLISH
1
2
1
2
3
4
5
6
3
MENU selection
Input TV/AV selection
Channel selection
Volume adjustment
Remote control sensor
Power
4
65
Power Indicator Status
Indicator
Red
Green
Status
Stand-by
Power on
7
Rear View
Right Side
Viewing the Control Panels
1
2
3
Headphone Jack
1
4
AV2 VIDEO Input
2
AV2 AUDIO Input
3
AV2 S-VIDEO Input
4
LCD - 32”
Bottom Side
1 2 3 4 9
1
Power Inlet with Switch
2
DVI Input (PC)
3
RGB Video Input (PC)
4
PC Audio Input
COMPONENT1 Video Input (DTV/DVD)
5
COMPONENT1 Audio Input (DTV/DVD)
6
7 8
5
6
7
COMPONENT2 Video Input (DTV/DVD)
8
COMPONENT2 Audio Input (DTV/DVD)
9
EURO-SCART1 Jack
10
EURO-SCART2 Jack
11
Antenna Input Jack
10 11
8
Viewing the Control Panels
Rear View
Right Side
1
2
3
Headphone Jack
1
4
AV2 VIDEO Input
2
AV2 AUDIO Input
3
AV2 S-VIDEO Input
4
ENGLISH
LCD - 37” / 42”
Bottom Side
1 2 3 4 9
1
Power Inlet with Switch
2
DVI Input (PC)
3
RGB Video Input (PC)
4
PC Audio Input
COMPONENT1 Video Input (DTV/DVD)
5
COMPONENT1 Audio Input (DTV/DVD)
6
COMPONENT2 Video Input (DTV/DVD)
7
7 8
5
6
8
COMPONENT2 Audio Input (DTV/DVD)
9
EURO-SCART1 Jack
10
EURO-SCART2 Jack
11
RS-232C (For Service)
12
AUDIO-OUT (Optical Audio Output)
13
Antenna Input Jack
10 11 12 13
9
Remote Control
1
Power On/Off Button
2
Numeric Buttons
3
One/Two-Digit Channel
Selection
4
Favorite Channel Selection
(See page 28)
5
Picture Still (See page 31)
Sleep Timer (See page 25)
6
Picture Mode Selection
7
( ) (See page 18)
Sound Mode Selection
8
( ) (See page 19)
9
Control the Cursor in the
OSD Menu ( ) and
( ) (Channel Up /
Down) (Teletext Page Up /
Down, Page 33) and
(Volume Up / Down)
10
MENU Confirmation
11
Display OSD Menu
12
PIP Functions:
(See page 29 ~ 30)
-PIP On/Off ( )
-Position Selection ( )
-Size Selection ( )
-Picture Mode Selection
( )
-Swapping main and sub
picture ( )
-Selecting the Input
Source ( )
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
Temporary Sound Mute
13
14
TV Input Source Selection
(See page 17)
External Source Input
15
Selection (See page 15)
16
Picture Size Selection
(See page 31)
17
Previous Channel
18
TV Information Display
(See page 25)
Sound Selection :
19
Mono/Stereo Dual Select
( ) (See page 20)
20
Fastext Functions :
(See page 32)
21
Sound Effect Selection
( ) (See page 20)
22
-Exit from the OSD
-Display the current time
when the OSD is off
(See page 22)
23
Teletext Functions :
(See page 32 ~ 33)
-Teletext On/Off ( )
-Cancel ( )
-Sub Page On ( )
-Page Hold ( )
-Index ( )
-Mix ( )
-Size ( )
-Reveal ( )
-PIP Picture Size Selection
( )
-Swapping main and sub
Sound ( )
- Makes sure there are no objects between the remote control and its sensor.
☛
- Don't place the remote control near a heater or in damp place.
- A strong blow to the remote control may cause it not to operate.
10
Inserting Batteries in the Remote Control
You must insert or replace the batteries in the remote control when you purchase the TV
or when you find that the remote control is no longer operating correctly.
Insert two AAA-size batteries (supplied) by matching the +
1
and - on the batteries to the diagram inside the battery
compartment.
■
Handle the remote control with care; avoid dropping it,
getting it wet, placing it direct sunlight, near a heater, or
where the humidity is high .
■
Remove the batteries to avoid damage from possible
battery leakage whenever you anticipate that the remote
control will not be used for an extended period.
ENGLISH
Connecting an Antenna or Cable
To view television channels correctly, a signal must be received by the set from one of
the following sources: an outdoor antenna, a cable television system or a satellite dish.
Connect the antenna or input cable to the 75 Ω coaxial input
1
on the rear of the TV.
If you are using an indoor antenna, you may need to turn it
2
when tuning your television until you receive a clear picture.
Rear of the TV
or
Cable Television
Network
11
Connecting to the RCA or S-Video Input ( Side AV2 )
Right Side of the TV
(A) For RCA Input
VCR
Camcorder
(B) For S-Video Input
Video game device
(A) For RCA Input
1.
Connect the RCA cable to the input jacks (video+ audio L/R of side AV2) on the TV and output
jacks on the external equipment such as a VCR, camcorder and some video game devices.
(B) For S-Video Input
1. Connect the S-Video/RCA (audio L/R of side AV2) cable to the input jacks on the TV and output
jacks on the external equipment such as a VCR, camcorder and some video game devices.
2.
If the external equipment has mono audio output, connect it only to left jack of the Audio Input/Output.
Connecting to the SCART Input
(A) SCART to SCART connector
Rear of the TV
(B) SCART to RCA connectors
(Video + Audio L/R)
■
The SCART1 or SCART2 connector is used for external equipment with RGB output, such as a VCR,
satellite receiver, camcorder, or video game devices.
SCART1 : Full SCART (CVBS & RGB input/output)
SCART2 : Half SCART (CVBS only input/output)
■
You can select and set one between the two types of cables (A, B) appropriate for the output jack of
external device.
DVD/DTV STB
VCR
Satellite Receiver
Camcorder
Video game device
12
Connecting to a DVD or DTV Set-Top Box INPUT (RCA or DVI)
Rear of the TV
Video Cable
DVD/DTV STB
Audio Cable
OR
DVI Cable
1. Connect the video cables to the Y, Pb, Pr input jacks (COMPONENT1 or 2) on the TV and the
Y, Pb, Pr output jacks on the DVD or DTV Set-Top Box.
2. Connect the audio cables to the Audio L/R input jacks (COMPONENT1 or 2) on the TV and the
Audio output jacks on the DVD or DTV Set-Top Box.
1. Connect the DVI cables to the DVI input jacks (DVI) on the TV and the DVI output jacks on the
DVD or PC.
2. Connect the audio cables to the Audio L/R input jacks on the TV and the Audio output jacks on
the DVD or PC.
Supported Signal for Component Ports
ENGLISH
COMPONENT 1
COMPONENT 2
480i / 60Hz 480p/ 60Hz 576i / 50Hz 576p / 50Hz 720p / 50Hz 720p / 60Hz 1080i / 60Hz
O
O
OO O OOO
OO O OOO
13
Connecting the Headphones
Right Side of the TV
You can connect a set of headphones to your TV if you wish to watch a program without
disturbing the other people. (See page 20)
1. Plug a set of headphones into the 3.5mm mini-jack socket on the right side of your TV.
You can be heard the sound through the headphones.
Note : If you use headphones for long period of time at a high volume, you may
damage your hearing.
Headphones are not included.
14
Connecting the Power Cord and Switching the TV On / Off
1
Connect the power cord for your TV to the power inlet on the
back of your TV.
2
Plug the power cord for the TV into a nearby outlet, and turn
on the power switch on the back of your TV.
3
Press the POWER, CH button on the front panel of your set
or press the POWER( ), CHANNEL() button on the
remote control.
After the green LED lamp switch on and your TV will be
turned on.
4
To switch your TV off, press the POWER( ) button again.
Selecting a Picture from External Sources
After your various systems (audio and video) have finished, you can view any of the
sources by selecting the appropriate external input.
1
Make sure all the necessary connections have been made.
ENGLISH
2
Press the POWER( ) button to switch the TV on.
3
Select the favorite source by pressing the TV/AV ( ) button
one or more times.
■
The Input Source ( ) is displayed in following order :
TV ➔ SCART1 ➔ SCART2 ➔ AV2 VIDEO ➔
AV2 S-VIDEO ➔ COMPONENT1 ➔ COMPONENT2 ➔
RGB ➔ DVI
■
The Video( ) is displayed in the following order :
SCART1 ➔ SCART2 ➔ AV2 VIDEO ➔ AV2 S-VIDEO
Selecting your Language
When you start using your TV for the first time, you must select the language in which to
display all on-screen menus.
1
Press the MENU button.
2
Press the (¥) button to select the Setup Group.
3
Press the () button to select the Language and
then press the OK button.
4
Select the appropriate language by pressing the ()
button and then press the OK button.
■
You can select English, Français, Deutsch, Italiano,
Español, Dutch, Português.
Picture Audio Timer Install Setup Option
:Position
/OK:
Select
Language
English
Français
Deutsch
Italiano
Español
Dutch
Português
MENU:
Previous
Language
English
Geometry
Aspect
Favorite Channel
No WSS
PIP Adjustmant
Factory Preset
EXIT
:Exit
Language
Auto
Full
5
Press the MENU button to return to the previous menu.
15
Storing Channels in Memory
Picture Audio Timer Install Setup Option
OK:
Select
:
Access
Picture Audio Timer Install Setup Option
Auto Tuning
Germany
Greece
Hungary
Italy
Luxembourg
Netherland
Norway
Poland
OK:
Select
:
Move
Picture Audio Timer Install Setup Option
/
0~9:Adjust
Auto Tuning
Programme
Colour
System
Manual Tuning
Fine Tuning
Name
Sound
Programme Edit
Auto Tuning
Programme
Colour
System
Manual Tuning
Fine Tuning
Name
Sound
Programme Edit
Auto Tuning
Programme
Colour
System
Manual Tuning
Fine Tuning
Name
Sound
Programme Edit
MENU:
MENU:
MENU:
Previous
Italy
12
PAL
BG
S23
217.25
S23
Stereo/Dual1
Previous
Italy
12
PAL
BG
S23
217.25
S23
Stereo/Dual1
Previous
Italy
12
PAL
BG
S23
217.25
S23
Stereo/Dual1
EXIT:
Exit
EXIT:
EXIT:
0~99
Press the MENU button.
1
Press the (¥) button to select Install group and press the
2
OK button.
Press the ()button to select Auto Tuning, and press the
3
(¥)button to select the country. Then press the OK button
for about 3 seconds.
Exit
You can select the countries in following order.
Austria ➔ Belgium ➔ Croatia ➔ Czech ➔ Denmark ➔
Finland ➔ France ➔ Germany ➔ Greece ➔ Hungary ➔
Italy ➔ Luxembourg ➔ Netherland ➔ Norway ➔ Poland ➔
Portugal ➔ Spain ➔ Sweden ➔ Switzerland ➔ Australia ➔
United Kingdom
■
You can stop the Auto tuning by pressing the MENU button
Exit
during auto tuning.
When you stop it, menus on the screen will be sorted and
changed to the Programme Edit screen automatically.
■
When the Auto tuning is finished, menus on the screen will
be changed to the Programme Edit screen automatically.
Press the () button to select Programme and press the
4
(¥)button. The channels will be stored one by one.
Press the () button to select Colour and press the OK
5
button.
Picture Audio Timer Install Setup Option
Picture Audio Timer Install Setup Option
:Position
:Position
Colour
PAL
SECAM
NTSC
/OK:
System
BG
DK
I
L
L´
M
/OK:
Select
Select
Auto Tuning
Programme
Colour
System
Manual Tuning
Fine Tuning
Name
Sound
Programme Edit
MENU:
Auto Tuning
Programme
Colour
System
Manual Tuning
Fine Tuning
Name
Sound
Programme Edit
MENU:
16
Previous
Previous
Italy
12
PAL
BG
S23
217.25
S23
Stereo/Dual1
EXIT
:Exit
Italy
12
PAL
BG
S23
217.25
S23
Stereo/Dual1
EXIT
:Exit
Colour
System
■
Pre-set colour will be displayed.
■
Press the () button to change the colour system.
You can select the Colour System in the following order.
PAL ➔ SECAM ➔ NTSC
Press the () button to select System and press the OK
6
button.
■
Pre-set sound system will be displayed.
■
Press the () button to change the sound system if
there is no sound.
You can select the sound system in the following order.
BG ➔ DK ➔ I ➔ L ➔ L´ ➔ M
Use the Auto tuning during a broadcast after connecting
☛
the antenna.
Storing Channels in Memory
Press the ()button to select Manual Tuning and press
7
the OK button.
Press the( ) button to select C (broadcast channels) or
S (cable channels) and press the channel number with the
number (0~9) buttons.
■
Press the (¥)button to increase or decrease the channel
by one.
■
The MANUAL Search function will operate in the button
direction you pressed when you press the (¥)button for
more than 2 seconds.
If you have picture noise on step 6, Press the ()button
8
to select Fine Tuning and press the (¥)button to adjust
the frequency manually.
Setting the program name and modification.
9
Press the ()button to select Name and then press the
(¥)button On the right side you can then input a program
name using up to 5 characters.
(A~Z, a~z, 0~9, space, ! , x , + , - , / )
Press the ( )button after you input the program name to store it.
Picture Audio Timer Install Setup Option
/
Pr/C/S:C/S
0~9:Adjust
0~9:Adjust
:Position /OK:Select
Picture Audio Timer Install Setup Option
Name
Name
S 1 1
Auto Tuning
Programme
Colour
System
Manual Tuning
Fine Tuning
Name
Sound
Programme Edit
MENU:
Previous
Manual Tuning
Fine Tuning
Name
Sound
Programme Edit
MENU:Previous EXIT:Exit
Auto Tuning
Programme
Colour
System
Manual Tuning
Fine Tuning
Name
Sound
Programme Edit
Italy
12
PAL
S23
217.25
S23
Stereo/Dual1
EXIT:
Exit
S23
217.25
S23
Stereo/Dual1
Italy
12
PAL
BG
S23
217.25
S11
Stereo/Dual1
BG
C:1~77,S:1~41
55.200~901.250
ENGLISH
Press the () button to select Sound and press the OK
10
button.
■
Pre-set sound mode will be displayed.
■
Press the () button to change the sound mode.
You can select the sound mode in the following order.
Stereo / Dual 1 ➔ Mono / Dual 1 ➔ Stereo / Dual 2
➔ Mono / Dual 1/2
You can get the same result by pressing the ( ) button
☛
on the remote control. (See page 20)
Press the (¥)button to select Programme Edit and press
11
the OK button. The sub-menu of the Program Table function
appears.
■
Follow the description for the function you want to use, press
the a button to complete the settings.
■
Here are the details about these functions:
Delete
( ) :
This function deletes a TV channel you do not
want to list.
Change ( ):
This function changes the program number (PR)
of a TV channel.
Exit
( ) :
Menu to Exit
.
:Position
/OK:
Picture Audio Timer Install Setup Option
Stereo / Dual 1
Mono / Dual 1
Stereo / Dual 2
Mono / Dual 1/2
:Position
/OK:
up/down/left/right and digit keys to select prog
001 C12 011 ----- 021 - ---002 C14 012 -- --- 022 -----
003 C16 013 - --- - 023 -----
004 C17 014 -- --- 024 ----005 C23 015 -- --- 025 ----006 S12 016 ----- 026 - ---007 S32 017 ----- 027 - ---008 C30 018 -- --- 028 ----009 -- --- 019 -- --- 029 -- --010 -- --- 020 -- --- 030 -- ---
Select
Sound
Select
1=del 2=change
MENU:
Auto Tuning
Programme
Colour
System
Manual Tuning
Fine Tuning
Name
Sound
Programme Edit
MENU:
Sound
Programme Edit
Program Table
Menu to Exit
Previous
Previous
EXIT
:Exit
Italy
12
PAL
BG
S23
217.25
S11
Stereo/Dual1
EXIT
:Exit
Stereo/Dual1
Name
Name
■
Press the (¥) or () button to select
and press the OK button.
program number
17
Customizing the Picture
Picture Audio Timer Install Setup Option
Mode
Standard
Brightness
Contrast
Sharpness
Colour
Tint
Temperature
:
Move
050
050
007
050
050
OK:
Select
MENU:
Previous
EXIT:
Press the MENU button.
1
Press the (¥) button to select the Picture group and press
2
the OK button.
■
Pre-set mode will be displayed.
■
Exit
The picture Mode will change whenever you press the()
button.
Picture Audio Timer Install Setup Option
Mode
Standard
Brightness
Contrast
Sharpness
Colour
Tint
Temperature
:Position
/OK:
Picture Audio Timer Install Setup Option
Mode
Standard
Brightness
Contrast
Sharpness
Colour
Tint
Temperature
:Position :Adjust OK:Select
Picture Audio Timer Install Setup Option
Mode
Standard
Brightness
Contrast
Sharpness
Colour
Tint
Temperature
Mode
Standard
050
Sport
050
Natural
007
Mild
050
Custom
050
MENU:
Previous
EXIT
Select
050
050
007
050
050
MENU:Previous EXIT:Exit
050
050
007
050
050
:Exit
Mode
Brightness : 0~100
Standard : Select when it is bright around the TV.
Sport : Select when you want to get a clearer picture or
watch sports.
Natural : Select when viewing movies or live music.
Mild : Select when it is dark around the TV or at night.
Custom : Select if you want to adjust the settings manually.
Otherwise, if you are viewing contents of the PIP function,
whenever you press the ( ) button, the picture mode will
change as above.
You can get the same result by pressing the ( ) button
☛
on the remote control.
Press the () button to move to the menu that you wish to
3
adjust by the (¥) button.
Brightness : Adjusts the brightness of the whole screen.
Contrast : Adjusts the clarity of the whole screen.
Sharpness : Corrects the contours of the image.
Color : Adjusts the color saturation of the image.
Tint : Adjusts the colors of the image.
050
050
007
050
050
MENU:Previous EXIT:Exit
Temperature
Temperature
Red
Green
Blue
MENU:Previous EXIT:Exit
:Position :Adjust OK:Select
Picture Audio Timer Install Setup Option
Mode
Standard
Brightness
Contrast
Sharpness
Colour
Tint
Temperature
:Position /OK:Select
18
Sharpness : 0~15
9300K
7500K, 9300K, Custom
50
0 ~ 100
50
0 ~ 100
50
0 ~ 100
Colour Temperature
Press the ()button to select Temperature.
4
■
If you select the temperature mode, you will change to
3 kind of mode.
■
If you adjust the color (Red, Green, Blue) you will
change to custom color mode.
Customizing the Audio
Press the MENU button.
1
Press the (¥) button to select the Audio group and pres
2
the OK button.
Press the () button to select Balance and press the
3
OK button.
Adjust the sound balance with (¥) or () button you wished.
Press the () button to select Volume and press the
4
OK button.
Adjust the sound volume with (¥) or () button you wished.
Press the () button to select Equalizer and press the
5
OK button.
Press the () button to select the audio mode according to
6
the type of image being watched.
Audio mode will be changed in the following order.
Standard ➔ Music ➔ Film ➔ Speech ➔ Custom
Standard : This is good for any picture.
Music : Select when you listen to music videos or concerts.
Film : Select when you watch movies.
Speech : Select when you listen to speeches or news.
Custom : Select when you want to adjust the setting
manually.
You can get the same result by pressing the ( ) button
☛
on the remote control.
This feature is operated when the “SRS WOW” is set to
☛
“Off” Mode.
Picture Audio Timer Install Setup Option
Balance
Volume
Equalizer
SRS WOW
Source
:Move
:Position OK:Select
Picture Audio Timer Install Setup Option
Balance
Volume
Equalizer
SRS WOW
Source
:Position :Adjust OK:Select
Picture Audio Timer Install Setup Option
Balance
Volume
Equalizer
SRS WOW
Source
50
30
On
Main
50
30
On
Main
MENU:Previous EXIT:Exit
50
30
On
Main
MENU:Previous EXIT:Exit
Balance : 0~100
ENGLISH
Press the () button to select Custom and press the
7
(¥) button to select the frequency that you want to adjust.
The frequency range will be selected as following order.
100 ➔ 300 ➔1K ➔ 3K ➔ 10K
Press the (¥) button and the () button to adjust.
8
If you adjust the frequency (100Hz, 300Hz, 1KHz, 3KHz,
☛
10KHz) in Standard, Music, Film or Speech mode, the
mode will be changed to Custom mode.
Select
MENU:Previous EXIT:Exit
50
30
Standard
On
Music
Main
Film
Speech
Custom
Volume : 0~100
Equalizer
100 300
1K 3K
Equalizer
10K
:Position :Adjust OK:Select
Picture Audio Timer Install Setup Option
Balance
Volume
Equalizer
SRS WOW
Source
:Position MENU:Previous EXIT:Exit
/OK:
19
Selecting WOW Surround
Select the Wow Surround feature to amplify the mid-to low-range sound or create
surround effect.
Picture Audio Timer Install Setup Option
:Position
Balance
Volume
Equalizer
SRS WOW
Source
/OK:Select
50
30
On
Main
MENU:Previous EXIT:Exit
SRS WOW
On
Off
SRS WOW
Selecting the Speaker Sound Source
Picture Audio Timer Install Setup Option
:Position
Balance
Volume
Equalizer
SRS WOW
Source
/OK:Select
50
30
On
Main
MENU:Previous EXIT:Exit
Source
Main
Sub
Source
Press the () button to select SRS WOW and press the
1
OK button.
■
The options available in the SRS WOW menu are displayed.
Press the () button to On or Off.
2
Press the OK button.
3
You can get the same result by pressing the ( ) button
☛
on the remote control.
is a trademark of SRS Labs, lnc.
WOW technology is incorporated under license from
SRS labs, lnc.
Press the () button to select the Source and press
1
the OK button.
Press the ()button to select the sound source of the
2
speaker.
Main ➔ Sub
-- YYoouu wwiillll hhaavvee ssoouunndd oonnllyy tthhrroouugghh tthhee hheeaaddpphhoonneess,, nnoott tthhee ssppeeaakkeerrss,,
☛
iiff yy
oouu ccoonnnneecctt hheeaaddpphhoonneess..
YYoouu ccaann aaddjjuusstt tthhee hheeaaddpphhoonneess'' vvoolluummee bbyy pprreessssiinngg tthhee
-- YYoouu ccaann lliisstteenn ttoo tthhee mmaaiinn ppiiccttuurree''ss ssoouunndd wwhheenn tthhee PPIIPP iiss oofff
yyoouu sseelleecctt PPIIPP mmooddee ssoouunndd..
WWhheenn yyoouu wwoouulldd lliikkee ttoo hhaavvee ssoouunndd tt
☛
yyoouu ccoonnnneecctt aa sseett ooff hheeaaddpphhoonneess ttoo yyoouurr TTVV,, tthhee
bbee ddeeccrreeaasseedd aauuttoommaattiiccaallllyy wwiitthhoouutt ccoonncceerrnniinngg tthhee pprreevviioouuss vvool
sseettttiinngg..
hhrroouugghh tthhee hheeaaddpphhoonneess,, iiff
vvoolluummee lleevveell wwiillll
(
¥)
bbuuttttoonn..
f eevveenn iiff
luummee
20
Listening to Stereo Sound / Dual Sound
Listening to Stereo Sound
Press the ( ) button on the remote control to select Mono
1
or Stereo.
■
Mono or Stereo be will selected in turn whenever you press
the button.
SSeelleecctt MMoonnoo ssoouunndd wwhheenn yyoouu hhaavvee ddiiffffiiccuullttyy wwiitthh sstteerreeoo ssoouunndd..
☛
Listening to the Dual Sound
Press the ( )button on the remote control to select Dual sound.
1
Dual 1: Your national language or Dual 2: Foreign language will be
selected by turn whenever you press the button.
Setting the Date & Time
Press the MENU button.
1
Press the () button to select Clock and press the (¥) or
2
OK button.
Press the (¥) button to move between Date ➔ Month ➔ Year.
3
Press the () or number (0~9) buttons to adjust the Date
4
and repeat the above steps 3-4 to adjust the Month and Year
in the same way.
■
You can erase and reset the Date by pressing the OK button.
Press the () button to select Clock and press the OK or
5
(¥) button to move to time adjust.
Press the () or number (0~9) buttons to adjust the Hourx
6
and Minute.
■
Adjust the Hour using the 24-hour system :
Example : 6 P.M. Press 1 and 8
■
You can erase and reset the and hour and minute by pressing
the OK button.
Picture Audio Timer Install Setup Option
/0~9:Adjus
Picture Audio Timer Install Setup Option
Clock
Update Pr.
On Timer
Off Timer
:Position
Clock
Update Pr.
On Timer
Off Timer
Time
Clock
- - : - -
AM
--:--
--:--
--:--
MENU:Previous EXIT:Exit
--:--
--:--
--:--
ENGLISH
Update Programme
■
Set the Pr. number if you want to update the time and date with
the information carried by the broadcast signal.
■
If you clear the Pr. number, the auto update function does not work.
Press the MENU button.
1
Press the () button to select Update Pr. and press the (¥)
2
button to move to the program number at the right side.
Press the () button to select the program number or input
3
the program number by pressing the number button directly.
Press the (¥) button to select Program number or press the
4
program number button directly.
■
You can erase and reset the program number by pressing the
OK button.
■
If you select Pr00, it applies to all programs.
:Position /OK:Select
Picture Audio Timer Install Setup Option
:Position
/0~9:Adjus
MENU:Previous EXIT:Exit
Clock
Update Pr.
On Timer
Off Timer
MENU:Previous EXIT:Exit
--:--
--:--
--:--
Clock
Update Pr. : 1~99
21
Setting the Preset Time ( On / Off )
This function is available after you set the clock first.
Picture Audio Timer Install Setup Option
:Position /OK:Select
Picture Audio Timer Install Setup Option
:Position /OK:Select
Picture Audio Timer Install Setup Option
:Position :Adjust
Picture Audio Timer Install Setup Option
:Position /OK:Select
Clock
Update Pr.
On Timer
Off Timer
On Timer
Enable
- - : - -
AM
On Time
Programme
Volume
MENU:Previous EXIT:Exit
Clock
Update Pr.
On Timer
Off Timer
On Timer
Enable
- - : - -
AM
On Time
Programme
Volume
MENU:Previous EXIT:Exit
Clock
Update Pr.
On Timer
Off Timer
On Timer
Enable
- - : - -
AM
On Time
Programme
Volume
MENU:Previous EXIT:Exit
Clock
Update Pr.
On Timer
Off Timer
Off Timer
Enable
- - : - -
AM
Off Time
MENU:Previous EXIT:Exit
--:--
--:--
--:--
--:--
--:--
--:--
Off
--:--
--:--
--:--
Off
--:--
--:--
--:--
Off
On
01
020
01
020
01
020
Enable
On Timer
Volume : 0~100
Off Timer
Press the MENU button.
1
Press the () button to select On Timer then press the OK
2
button.
Press the () button to select Enable and press the (¥)
3
or OK button.
Press the (¥) button to select ON or OFF.
Press the () button to set On Timer.
4
Press the (¥) button to move to the Hour or Minute.
Press the () or Number (0~9) button to adjust the Hour or
Minute and then press the (¥) button.
■
You can erase and reset the Hour and Minute by pressing
the OK button.
Press the () button to move to
5
Programme
and press the
(¥) button.
Press the () or Number (0~9) button to select the channel.
■
You can erase and reset the channel by pressing the OK button.
Press the () button to select Volume and press the (¥)
6
button to adjust the volume.
Press the ()
7
button to select Off Timer then press the OK
button.
Press the () button to select Enable and press the (¥)
8
or OK button.
Press the (¥) button to select ON or OFF.
Press the () button to set Off Timer.
9
Press the (¥) button to move to the Hour or Minute.
Press the () or Number (0~9) button to adjust the Hour or
Minute and then press the (¥) button.
■
You can erase and reset the Hour and Minute by pressing
the OK button.
22
PM 07:30
Displaying the Current Time
This function is available after you set the clock first.
Press the ( ) button on the remote control to display the
1
current time.
Setting Restrictions On Button Input
Press the MENU button.
1
Press the (¥) button to select the Option group and press
2
the OK button.
Press the () button to select Local Lock and press the
3
OK button.
Press the () button to select Off, Once or Always and
4
press the OK button.
Off : With the lock function off, you can control the TV with
both the remote control and the buttons on the TV.
Once : The lock function will turn off automatically after you
turn the TV on/off once with the remote control.
Always: With the lock function always on, you can control
the TV only with the remote control, not with the
buttons on the TV.
Picture Audio Timer Install Setup Option
OK:
Select
:
Move
Picture Audio Timer Install Setup Option
:Position /OK:Select
Local Lock
Off
Once
Always
MENU:Previous EXIT:Exit
Local Lock
OSD Setting
No Signal Power Off
No Operation Power Off
Noise Reduction
Daitsu Engin
MENU:
Previous
Local Lock
OSD Setting
No Signal Power Off
No Operation Power Off
Noise Reduction
Daitsu Engin
EXIT:
Local Lock
ENGLISH
Off
20
180
On
Exit
Off
20
180
On
TThhiiss ffuunnccttiioonn pprreevveennttss cchhiillddrreenn ffrroomm ccoonnttrroolllliinngg tthhee TTVV wwhheenn
☛
ppaarreennttss aarree nnoott hhoommee.. IItt iiss aavvaaiillaabbllee aafftteerr sseettttiinngg tthhiiss ffuunnccttiioonn
wwiitthh tthhee rreemmoottee ccoonnttrrooll..
Setting the OSD Display Time
Press the MENU button.
1
Press the (¥) button to select the Option group and press
2
the OK button.
Press the () button to select OSD Setting and press the
3
OK button.
Press the (¥) button to adjust the display time.
4
■
Whenever you press this button, you can adjust it in 5 second
increments from 0 to 60 seconds.
If you finish setting the time, press the MENU button.
5
☛☛ If you do not press the MENU button after adjusting the
OSD timeout, the menu screen will disappear automatically
after the set time.
Picture Audio Timer Install Setup Option
OSD Setting
0 ~ 20
Timeout
Transparency
MENU:Previous EXIT:Exit
OSD Setting
Timeout
Transparency
OFF,5~60(step:5)
:Position /OK:Select
Picture Audio Timer Install Setup Option
Local Lock
OSD Setting
30
No Signal Power Off
0
No Operation Power Off
Noise Reduction
Daitsu Engin
OSD Setting
Local Lock
OSD Setting
30
No Signal Power Off
0
No Operation Power Off
Noise Reduction
Daitsu Engin
Off
20
180
On
Off
20
180
On
:Position /OK:Select
MENU:Previous EXIT:Exit
OSD Setting
☛☛ If you set o, menu screen will not
disappear automatically.
23
No Signal Auto Power Off
Automatically turns the power off if there is no broadcast signal or button pressed
for some time.
Picture Audio Timer Install Setup Option
:Adjus
MENU:Previous EXIT:Exit
0:OFF, 1~20
Local Lock
OSD Setting
No Signal Power Off
No Operation Power Off
Noise Reduction
Daitsu Engin
No Signal Power Off
No Key Operation Auto Power Off
Automatically turns the power off if there is no button pressed for a period of time after
AUTO Wake-Up turns the power on.
Press the MENU button.
1
Off
Press the (¥) button to select the Option group and press
20
180
On
2
the OK button.
Press the () button to select No Signal Power Off .
3
Press the (¥) buttons to adjust the auto power off time.
4
■
You can adjust it in 1-minute increments from 0 to 20
minutes. ( 0 ➔ 1 ➔ 2 ➔ ... ➔ 18 ➔ 19 ➔ 20 )
■
It you set the time to 0, the TV will not use the auto power
off function.
Picture Audio Timer Install Setup Option
0:OFF, 30~180(Step:30)
:Adjus
MENU:Previous EXIT:Exit
Local Lock
OSD Setting
No Signal Power Off
No Operation Power Off
Noise Reduction
Daitsu Engin
No Operation Power Off
Reducing Picture Noise
Use this function when you have a bad image with the picture noise.
Picture Audio Timer Install Setup Option
Noise Reduction
On
Off
Local Lock
OSD Setting
No Signal Power Off
No Operation Power Off
Noise Reduction
Daitsu Engin
Press the MENU button.
1
Off
Press the (¥) button to select the Option group and press
20
180
On
2
the OK button.
Press the () button to select No Operation Power Off .
3
Press the (¥) buttons to adjust the auto power off time.
4
■
You can adjust it in 30-minute increments from 0 to 180
minutes. ( 0 ➔ 30 ➔ 60 ➔ 90 ➔ 120 ➔ 150 ➔ 180 )
■
It you set the time to 0, the TV will not use the auto power
off function.
Press the MENU button.
1
Off
Press the (¥) button to select the Option group and press
20
180
On
2
the OK button.
Press the () button to select Noise Reduction.
3
Press the OK button.
24
:Position /OK:Select
MENU:Previous EXIT:Exit
Noise Reduction
Press the () button to select On or Off.
4
■
Whenever you press the () button, the selection wil
switch between On and Off.
Daitsu Engine
Press the MENU button.
1
Press the (¥) button to select the Option group and press
2
the OK button.
Press the () button to select Daitsu Engine and press
3
the OK button.
Press the () button to select Off, Low, High mode and
4
demo1, demo2 mode Press the OK button.
Setting the Sleep Timer
This function is available only with the remote control.
Press the ( ) button.
1
■
Whenever you press this button the sleep timer will select
times in the following order.
Picture Audio Timer Install Setup Option
Daitsu Engin
Off
Low
High
Demo1
Demo2
:Position /OK:Select
MENU:Previous EXIT:Exit
Local Lock
OSD Setting
No Signal Power Off
No Operation Power Off
Noise Reduction
Daitsu Engin
Daitsu Engine
ENGLISH
Off
20
180
On
SLEEP Off ➔ SLEEP 5 ➔ SLEEP 10 ➔ SLEEP 20 ➔ SLEEP 30 ➔
SLEEP 60 ➔ SLEEP 90 ➔SLEEP 120 ➔ SLEEP 150 ➔ SLEEP 180
Displaying the TV Information
Press the ( ) button on the remote control to display the
1
current channel, time, DVI Input.
If you press this ( ) button again, the information disappear.
Pr. 07
CATV : Current TV Channel System.
PM 12:02
: Current Channel.
: PIP Setting (Available only when the PIP is on).
: Current Time
(When the time is not set,
--:--
is displayed).
SLEEP 30
PM 12:02
Pr. 07
(S07)
Pr. 07
(S07)
Component2
25
Adjusting the Screen Geometry
This function does not work in DVI-Digital mode.
Picture Audio Timer Install Setup Option
:Move OK:Select MENU:
Language
English
Geometry
Aspect Mode
No WSS
Favorite Channel
PIP Adjustmant
Factory Preset
Previous
EXIT
Auto
Full
:Exit
Auto Geometry Adjust
Press the MENU button.
1
Press the (¥) button to select the Setup group and press
2
the OK button.
Press the () button to select the Geometry group and
3
press the OK button.
Press the () button to select Auto Geometry Adjust and
4
press the OK button.
After then the screen will be automatical position and size setup.
Picture Audio Timer Install Setup Option
Geometry
Auto Geometry Adjust
H. Size
H. Position
V. Position
Phase
:Position
Picture Audio Timer Install Setup Option
:Move
:Adjust
Picture Audio Timer Install Setup Option
/OK:
Select
Auto Geometry Adjust
H. Size
H. Position
V. Position
Phase
MENU:Previous EXIT:Exit
Auto Geometry Adjust
H. Size
H. Position
V. Position
Phase
MENU:Previous EXIT:Exit
Geometry
Geometry
0
50
50
0
0
50
50
0
0
50
50
0
Language
English
Geometry
Aspect Mode
No WSS
Favorite Channel
PIP Adjustmant
Factory Preset
Geometry
Language
English
Geometry
Aspect Mode
No WSS
Favorite Channel
PIP Adjustmant
Factory Preset
H. Size : 0~100
Language
English
Geometry
Aspect Mode
No WSS
Favorite Channel
PIP Adjustmant
Factory Preset
Auto
Full
Auto
Full
Auto
Full
Adjusting the horizontal Size
Press the () button to select H.Size.
1
Press the (¥) button to adjust the horizontal Size.
2
Adjusting the horizontal position
Press the () button to select H.Position.
1
Move the PC screen to the right or left by pressing the (¥)
2
button.
:Move
Picture Audio Timer Install Setup Option
:Move
:Adjust
Auto Geometry Adjust
H. Size
H. Position
V. Position
Phase
:Adjust
MENU:Previous EXIT:Exit
Geometry
MENU:Previous EXIT:Exit
26
H. Position : 0~100
Language
Geometry
Aspect Mode
0
No WSS
50
Favorite Channel
50
PIP Adjustmant
0
Factory Preset
V. Position : 0~100
English
Auto
Full
Adjusting the vertical position
Press the () button to select V.Position.
1
Move the PC screen up or down by pressing the (¥) button
2
Adjusting the Screen Geometry
This function does not work in DVI-Digital mode.
Adjusting the Phase
Press the MENU button.
1
Press the (¥) button to select the Setup group and press
2
the OK button.
Press the () button to select the Geometry group and
3
press the OK button.
Press the () button to select Phase.
4
Adjust the phase value with (¥) or () button you wished.
Setup your Screen Aspect
Press the MENU button.
1
Press the (¥) button to select the Setup group and press
2
the OK button.
Press the () button to select Aspect Mode and Press the
3
OK button.
Press the () button to move the position and Press the
4
OK button.
■
You can select up to 6 screen aspect mode.
Picture Audio Timer Install Setup Option
Geometry
Auto Geometry Adjust
H. Size
H. Position
V. Position
Phase
:Move
:Adjust
Picture Audio Timer Install Setup Option
Aspect Mode
Auto
Normal
Full
Zoom1
Zoom2
Panorama
:Position
/OK:
Select
MENU:Previous EXIT:Exit
Language
Geometry
Aspect Mode
0
No WSS
50
Favorite Channel
50
PIP Adjustmant
0
Factory Preset
MENU:Previous EXIT:Exit
Language
Geometry
Aspect Mode
No WSS
Favorite Channel
PIP Adjustmant
Factory Preset
English
Phase
English
Aspect Mode
Auto
Full
Auto
Full
ENGLISH
You can get the same result by pressing the ( ) button
☛
on the remote control. (See page 31)
How to Watching No WSS Function
Press the MENU button.
1
Press the (¥) button to select the Setup group and press
2
the OK button.
Press the () button to select No WSS Press the OK button.
3
Press the () button to move the position and press the OK
4
button
■
You can select up to 3 screen function.
Picture Audio Timer Install Setup Option
No WSS
Full
Normal
Panorama
:Position
/OK:
Select
MENU:Previous EXIT:Exit
Language
English
Geometry
Aspect Mode
No WSS
Favorite Channel
PIP Adjustmant
Factory Preset
No WSS
Auto
Full
27
Watching your Favorite Channels
Chose when deleting the favourite channels registered in the buttons 1 to 5.
Picture Audio Timer Install Setup Option
Favorite Channel
1: -----
2: -----
3: -----
4: -----
5: -----
/
0~9:Adjust OK:
Select
MENU:
Language
Geometry
Aspect Mode
No WSS
Favorite Channel
PIP Adjustmant
Factory Preset
Previous
EXIT:
English
Exit
Auto
Full
Press the MENU button.
1
Press the (¥) button to select the Setup group and press
2
the OK button.
Press the () button to select Favourite Channel Press
3
the OK button.
Press the () button to move the position and press the
4
(¥) button to select Channel No.
■
You can select up to 5 Channel No. also, you can direct input
program No. by press numeric button (0~9).
■
You can delete the selection by pressing the OK button and
pressing the Number or ( ) buttons to select the channel.
■
The selection will switch whenever you press the Favourite
( ) button on the remote control.
■
You can register your favourite TV channels (PR 1 - PR 99)
in the number buttons 1 to 5. After registering, the channel
can be called by pressing the Favourite ( ) button and a
number button 1 to 5.
Factory Preset
Picture Audio Timer Install Setup Option
/
0~9:Adjust OK:
28
Select
MENU:
Language
Geometry
Aspect Mode
No WSS
Favorite Channel
PIP Adjustmant
Factory Preset
Previous
EXIT:
English
Auto
Full
Exit
Press the MENU button.
1
Press the (¥) button to select the Setup group and press
2
the OK button.
Press the () button to select Factory Preset Press the
3
OK button.
■
The Audio and the Video setting will be reset to the factory
default settings.
Display the Picture in Picture ( PIP )
■
This function is available only with the remote control.
■
You can watch another device's image in the PIP while watching the TV, PC or in
VIDEO the main image.
Press the PIP( ) button.
1
There are 2 modes of window : PIP, POP
Whenever you press this button, PIP window mode will be
changed.
The PIP window is changed in the following order :
PIP➔ POP ➔ Off
ENGLISH
< PIP >
Press the ( ) button to select the external signal source for
2
< POP >
the PIP.
■
The external signal source will display whenever you press
the ( ) button.
(TV ➔ SCART1 ➔ SCART2 ➔ AV2 VIDEO ➔AV2 S-VIDEO
➔ COMPONENT1 ➔ COMPONENT2 ➔ RGB)
☛☛ You can change the main picture channel by pressing the
button.
(
)
PIP
Main
SCART 1/2
AV 2
COMPONENT 1
COMPONENT 2
PC
DVI
TV
ANALOG
DIGITAL
PIP
TV
X
O
O
O
O
O
O
SCART1/ 2
O
X
O
O
O
O
O
AV 2
O
O
X
O
O
O
O
COMPONENT 1 COMPONENT 2
Changing the PIP Position
PC
ANALOG
O
O
O
X
X
X
O
O
O
O
X
X
X
O
O
O
O
X
X
X
X
DVI
DIGITAL
O
O
O
O
O
X
X
Press the ( ) button on the remote control.
1
■
The PIP position will change free positions whenever you
press () or (¥) button.
PIP Position
PIP Position
X: 009
Y: 000
X : 095
Y : 000
Picture Audio Timer Install Setup Option
PIP Adjustmant
H. Position
V. Position
Size
:Move
:Adjust
030
MENU:
0
0
Language
Geometry
Aspect Mode
No WSS
Favorite Channel
PIP Adjustmant
Factory Preset
Previous
EXIT:
English
Exit
Auto
Full
29
Display the Picture in Picture ( PIP )
Picture Audio Timer Install Setup Option
PIP Adjustmant
H. Position
V. Position
Size
:Move
:Adjust
030
MENU:
0
0
Language
Geometry
Aspect Mode
No WSS
Favorite Channel
PIP Adjustmant
Factory Preset
Previous
EXIT:
English
Exit
Auto
Full
Changing the PIP Size
Press the ( ) button on the remote control.
1
■
The PIP will change free different size whenever you
press () or (¥) button.
PIP Size
+ 30 -
+ 30
Selecting the image size In the PIP
Press the ( ) button on the remote control.
1
■
When you are viewing the Sub-picture :
The sub picture size will be changed in the following
order whenever you press this button.
4 : 3 16 : 9
PIP Size
-
Changing the PIP Mode
Press the ( ) button on the remote control.
1
■
The PIP mode will change whenever you press this button.
Standard ➔ Sport ➔ Natural ➔ Mild ➔ Custom
Swapping the Main & Sub-Picture
Press the ( ) button on the remote control.
1
■
The Main image and PIP image will switch with each other
whenever you press this button.
Swapping the Main & Sub-Sound
Press the ( ) button on the remote control.
1
■
The Main sound and PIP sound will switch with each other
Whenever you press this button.
30
Changing the Picture Size
■
You can change the screen size according to the picture aspect ratio. Choose the optimum one from the following ASPECT modes.
■
The Auto aspect mode is fixed at Full when you are using the TV as a PC screen.
Press the ( ) button on the remote control.
1
■
When you are viewing the Main image:
The image will change as shown below whenever you press
this button.
( Auto ➔ Normal ➔ Full ➔ Zoom 1 ➔ Zoom 2 ➔ Panorama )
ENGLISH
Auto
Zoom 1 Zoom 2
Auto :
When a WSS (Wide Screen Signalling) signal, which shows
Normal
SUBTITLE
Full
Picture Audio Timer Install Setup Option
:Position
Panorama
the aspect ratio of the picture, is included in the broadcast signal or
the signal from an external device, the TV automatically changes the
Full mode according to the WSS signal.
If a WSS signal is not included, the picture is displayed according to
the with the 4:3 Auto aspect function.
Normal:Use to view a normal picture
(4:3 aspect ratio)
as this
is its original shape.
Full :
This uniformly stretches the left and right sides of a normal
picture (4:3 aspect ratio) to fill the wide TV screen.
For 16:9 aspect ratio pictures that have been squeezed into a
normal picture (4:3 aspect ratio), use the Full mode to restore
the picture to its original shape.
/OK:
Aspect Mode
Select
Auto
Normal
Full
Zoom1
Zoom2
Panorama
MENU:Previous EXIT:Exit
Language
English
Geometry
Aspect Mode
No WSS
Favorite Channel
PIP Adjustmant
Factory Preset
Aspect Mode
Auto
Full
Zoom 1 : This zooms up the wide picture (16:9 aspect ratio)
to the full screen.
Zoom 2 : The screen that expands Zoom1 screen vertically
or horizontally.
Panorama : The screen that expands 4:3 video horizontally
to fit the 16:4 mode screen and to minimize distortion, sides
are expanded more than center.
Display a Still Image
Press the Still ( ) button on the remote control.
1
■
The picture does not move but the sound plays normally.
■
Press this button again if you want to go back to a normal
picture.
31
Teletext Functions
The Teletext page of most TV channels provide information such as TV programme
times, News bulletins, Weather forecasts, Travel information, or Sports results.
Functions of the teletext
ABC D
E
F
Displaying the Teletext Information
Part Display Contents
A Selected page number.
B Broadcast Station identity.
C Current page number or searching status.
D Date and time.
E Text information.
F FASTEXT information.
Red, Green, Yellow, Cyan
32
Select the channel providing the teletext service using the
1
( ) or ( ) button.
Press the TEXT ( ) button to activate the teletext mode.
2
The contents of page 250 are displayed.
To display the index page, press the INDEX ( ) button.
3
To display the teletext page simultaneously with the actual
4
broadcast, press the MIX ( ) button.
To return to normal viewing press the CANCEL ( ) button.
5
“???” (specific characters) is displayed at the upper left until
the new screen is selected.
To exit from the teletext mode, press the TEXT ( ) button
6
again.
Selecting a Special Teletext Functions
Selecting a Special Teletext Functions
MENU Functions
REVEAL Displays concealed text such as answer to
quiz games.
To return to normal viewing, press this
button again.
SUB-PAGE Displays a secondary page by entering its
number.
PAGE UP Displays the next page.
PAGE DOWN Displays the previous page.
HOLD When the secondary pages are displayed in
sequence, press the HOLD button.
To freeze the current display page, press the
HOLD button again to resume.
ENGLISH
SIZE Whenever you press this button, the letter
size of the page will be changed.
Once press : The letter of the top half page
enlarge to double size.
Twice press : The letter of the bottom half
page enlarge to double size.
Three times press : Return to the normal
viewing.
33
Connecting to the PC (DVI)
DVI INPUT
Rear of the TV
Rear of the PC
Audio Cable
DVI Cable
◆
Connect the DVI Cable to the DVI INPUT port on the TV and
(Not Included)
(Not Included)
output port on the Rear of the PC.
RGB INPUT
Rear of the TV
Rear of the PC
Audio Cable
15Pin D-Sub Cable
◆
Connect the 15Pin D-Sub Cable to the RGB INPUT port on the TV and
output port on the Rear of the PC.
(Not Included)
34
Input Selection
1. TV
2. SCART1 RGB
3. SCART2 RGB
4. AV2 VIDEO
5. AV2 S-VIDEO
COMPONENT1
6.
7.
COMPONENT2
8. RGB
9. DVI
To use the TV as a PC Display
Turn the PC on.
1
Press the PC or ( ) button on the remote control to select
2
the PC.
Set up the PC software. (See page 35)
3
Adjust the screen in PC Mode. (See page 26 ~ 27)
4
Setting the PC Software
First, click on Settings on the Windows Start menu and click
1
on "Control Panel".
Double click on the Display icon.
2
Click on the Settings tab on the display dialog-box.
3
Adjust the resolution up to 1366 x 768 pixels.
4
Click the Advanced button and click the Monitor tab on the
5
dialog-box. Set the vertical-frequency to 60Hz and then click
the OK button.
☛☛ - Maximum resolution depends on the Video Card.
- Maximum supported resolution is 1366 X 768 @ 75Hz ,
You can get the best picture at 1366 X 768@ 60Hz.
- There are 16,770,000 supported colours.
ENGLISH
35
RS-232C Configurations
PC TV
RXD
TXD
GND
2
3
5
Serial Link Command
2
3
5
RXD
TXD
GND
Command from host
Ack from monitor
+
‘[‘
‘[‘
‘[‘
‘[‘
‘[‘
‘SAB’
+
‘S4A’
+
‘S4G’
+
‘S4F’
‘[‘
‘]‘
+
+
+
+
++
‘000#’
‘000#’
‘000#’
‘0303’
‘0301’
‘0403’
‘0401’
‘0505’
‘0504’
‘000#’‘S4E’
COMMAND
(3 byte)
RETURN
(4 byte)
Power on/off control
0=standby, 1=on
Main AV Input selsection
1=TV, 2=
SCART1/2
, 3=AV2, 4=Component1, 5=Component2, 6=DVI
PIP AV Input selection
1=TV, 2=
SCART1/2
, 3=AV2, 4=Component1, 5=Component2, 6=DVI
Select YPbPr input for Component1
Select CVBS input for Component1
Select YPbPr input for Component2
Select CVBS input for Component2
Select Digital input for DVI
Select Analog input for DVI
Aspect ratio selection
0=Normal, 1=Panorama, 2=Zoom, 3=Full
ARGUMENT
(4 byte)
‘/n‘
36
++
‘[‘
+
‘[‘
+
‘[‘
‘[‘
‘[‘
‘[‘
‘[‘
‘+CB’
+
‘-CB’
+
+
‘+3A’
+
‘-3A’
+
+
‘000#’‘SCA’
‘####’‘SCB’
‘0###’‘S3A’
Caption on/off
0=off, 1=on
Set TV channel number
0012=CH12, 1012=CATV12
TV channel up
TV channel down
Set volume to ### (=000~100)
Volume up
Volume down
Standard Display Mode
ENGLISH
If the signal from the system equals the standard signal mode, the screen will adjust automatically.
If the signal from the system does not equal the standard signal, adjust the display mode as shown below
referring to your video card instructions. Otherwise there will be no picture or only power may turn on.
Resolution
640 x 350
720 x 400
VGA, 640 x 480
VGA, 640 x 480
VGA, 640 x 480
SVGA, 800 x 600
SVGA, 800 x 600
SVGA, 800 x 600
Horizontal (KHz) Vertical (Hz)
31.469
31.469
31.469
37.500
37.861
37.879
46.875
48.077
70.086
70.087
59.940
75.000
72.809
60.317
75.000
72.188
Clock Frequency (MHz)
25.175
28.322
25.175
31.500
31.500
40.000
49.500
50.000
Polarity (H/V)
+ / -
- / +
- / -
- / -
- / -
+ / +
+ / +
+ / +
XGA, 1024 x 768
XGA, 1024 x 768
XGA, 1024 x 768
WXGA, 1280 x 768
WXGA, 1366 x 768
48.363
56.476
60.023
60.023
60.023
60.004
70.069
75.029
75.029
75.029
65.000
75.000
78.750
78.750
78.750
- / -
- / -
+ / +
+ / +
+ / +
37
Pin Configuration
DVI-D Connector
Pin Signal Assignment
1 T.M.D.S Data22 T.M.D.S Data2+
3 T.M.D.S Data2/4 Shield
4 T.M.D.S Data45 T.M.D.S Data4+
6 DDC Clock
7 DDC Data
8 No Connect
9 T.M.D.S Data110 T.M.D.S Data1+
11 T.M.D.S Data1/3 Shield
12 T.M.D.S Data3-
Pin Signal Assignment
13 T.M.D.S Data3+
14 +5V Power
15 Ground(for +5V)
16 Hot Plug Detect
17 T.M.D.S Data018 T.M.D.S Data0+
19 T.M.D.S Data0/5 Shield
20 T.M.D.S Data521 T.M.D.S Data5+
22 T.M.D.S Clock Shield
23 T.M.D.S Clock+
24 T.M.D.S Clock-
PC Input Connector (15Pin D-Sub)
Pin PC IN
1 Red (R)
2 Green (G)
3 Blue (B)
4 Grounding
5 Grounding (DDC)
6 Red (R) Grounding
7 Green (G) Grounding
8 Blue (B) Grounding
9 Reserved
10 Sync Grounding
11 Grounding
12 Data (DDC)
13 Horizontal Sync
14 Vertical sync
15 Clock (DDC)
38
Troubleshooting
For TV
ENGLISH
No picture or sound.
Screen is black.
Picture is OK but
there is no sound.
Poor sound quality.
No image on a
specific channel.
☛ Make sure the TV is plugged in.
☛ Make sure the power cord is connected to the consent correctly.
☛ Check the power failure.
☛ Make sure the external signal source mode is selected.
☛ Press the TV/AV button to change to TV.
☛ Press the Mute button.
☛ Check another channel.
☛ Press the button to increase the volume.
☛ Make sure the channel using a stereo broadcast by pressing the
Display( ) button.
☛ Select Mono. The sound quality of a stereo broadcast may be
unstable in an area with a weak signal. (See page 25)
☛ Make sure the channel selection is correct.
☛ Change the antenna direction to the right or left.
☛ Adjust the fine tuning of the channel.
Image is not stable
and may appear to
vibrate , horizontal
bars appear.
No color on a
specific channel
(a black & white
image).
Black or white dots
appear on all
channels or a
specific channel.
☛ Adjust the fine tuning of the channel.
☛ Make sure there is no powerful electromagnetic wave interference
from the transmitting station.
☛ Stop using a hair drier, electric drill or electric blender.
☛ Check other channels to see if the specific channel is
broadcasting a black & white program.
☛ Adjust the color. (See page 18)
☛ Make sure the antenna is connected correctly. (See page 11)
☛ Make sure the status of the antenna or wire is good .
☛ Adjust the fine tuning of the channel.
39
For Monitor
Troubleshooting
"No signal"
message
"Out of range"
message
Picture rolls down
vertically.
A shadowed area
appears on the screen.
The image is too large
or too small.
☛ Check if the signal cable(DVI Cable) is properly connected to
the computer. (See page 34)
☛ This message may appear when the resolution and frequency
of the video card in the computer are out the range of the TV.
Select the proper resolution and frequency for the TV.
(See page 37)
☛ Check if the signal cable (DVI Cable) is properly connected
to the computer. (See page 34)
☛ Make sure the resolution and frequency of the computer video
card are set properly to the range of the TV.
Set the picture again referring to the standard display mode
and current mode. (See page 37)
☛ Adjust the picture to use the screen position feature.
(See page 26)
Horizontal or vertical
bars appear on the
screen.
The power indicator
light blinks green.
40
☛ Adjust the frequency and fine tuning.
☛ Adjust the resolution and frequency to the recommended
specifications. (See page 37)
(1366 x 768 @ 60Hz)
☛ The TV is in power saving mode. The picture will return to
normal status when you press any key on the keyboard or
move the mouse.
Specifications
ENGLISH
Model name
LCD
TV/ VIDEO
COMPONENT
SCART
PC
Audio Output
Power Supply
Power Consumption
Stand-by Mode
Size
Display Size
Pixel Pitch
Pixel Number
Type
Brightness
Contrast Ratio
Viewing Angle
Colour System
Sound System
Video System
Y / Pb / Pr
Video Input
Audio Input
RGB Input
Sync.
Display Colour
Max. Resolution
Sync.(H/V Separate)
Horizontal
Vertical
LCD
32
32” Diagonal
697.64 mm (H) x 392.25 mm (V)
0.170 mm (H) x 0.510 mm (V)
1366 x 768 (WXGA)
a-Si TFT active matrix
500 cd / m
2
600 : 1
176 (H) / 176 (V)
PAL / SECAM / AV NTSC
D/K, I, L, L´.M
CVBS, S-VHS
COMPONENT1,2 : 480i/p, 576i/p, 720p, 1080i
1.0 Vp-p @ 75 ohm
500mV RMS
0.7 Vp-p @ 75 ohm
30 ~ 61KHz
56 ~ 75Hz
16.7M (true)
1360 x 768
Positive or Negative
7.5W + 7.5W (2Way 4Speaker, 4Ω)
Internal Type AC 110 ~ 240V, 50 / 60Hz
MAX. 127W
<
3W
Dimension
810.7mm x 634.8mm x 105mm
( W x H x D )
Weights
Accessories
Remote Control, Battery (AAA type), Operating Instructions
☛☛ Design and specifications are subject to change without notice.
(Stand 245mm)
25Kg
Power Cord
41
Specifications
Model name
LCD
TV/ VIDEO
COMPONENT
SCART
PC
Audio Output
Power Supply
Power Consumption
Stand-by Mode
Size
Display Size
Pixel Pitch
Pixel Number
Type
Brightness
Contrast Ratio
Viewing Angle
Colour System
Sound System
Video System
Y / Pb / Pr
Video Input
Audio Input
RGB Input
Sync.
Display Colour
Max. Resolution
Sync.(H/V Separate)
Horizontal
Vertical
LCD
37
37” Diagonal
819.6 mm (H) x 460.8 mm (V)
0.20 mm (H) x 0.60 mm (V)
1366 x 768 (WXGA)
a-Si TFT active matrix
500 cd / m
2
600 : 1
176 (H) / 176 (V)
PAL / SECAM / AV NTSC
D/K, I, L, L´.M
CVBS, S-VHS
COMPONENT1,2 : 480i/p, 576i/p, 720p, 1080i
1.0 Vp-p @ 75 ohm
500mV RMS
0.7 Vp-p @ 75 ohm
30 ~ 61KHz
56 ~ 75Hz
16.7M (true)
1360 x 768
Positive or Negative
7.5W + 7.5W (2Way 4Speaker, 4Ω)
Internal Type AC 110 ~ 240V, 50 / 60Hz
MAX. 170W
<
3W
Dimension
( W x H x D )
Weights
Accessories
Remote Control, Battery (AAA type), Operating Instructions
☛☛ Design and specifications are subject to change without notice.
42
944.2mm x 724.5mm x 128mm
(Stand 282mm)
32Kg
Power Cord
Specifications
ENGLISH
Model name
LCD
TV/ VIDEO
COMPONENT
SCART
PC
Audio Output
Power Supply
Power Consumption
Stand-by Mode
Size
Display Size
Pixel Pitch
Pixel Number
Type
Brightness
Contrast Ratio
Viewing Angle
Colour System
Sound System
Video System
Y / Pb / Pr
Video Input
Audio Input
RGB Input
Sync.
Display Colour
Max. Resolution
Sync.(H/V Separate)
Horizontal
Vertical
LCD
42
42” Diagonal
930.25 mm (H) x 523.01 mm (V)
0.227 mm (H) x 0.681 mm (V)
1366 x 768 (WXGA)
a-Si TFT active matrix
500 cd / m
2
500 : 1
176 (H) / 176 (V)
PAL / SECAM / AV NTSC
D/K, I, L, L´.M
CVBS, S-VHS
COMPONENT1,2 : 480i/p, 576i/p, 720p, 1080i
1.0 Vp-p @ 75 ohm
500mV RMS
0.7 Vp-p @ 75 ohm
30 ~ 61KHz
56 ~ 75Hz
16.7M (true)
1360 x 768
Positive or Negative
7.5W + 7.5W (2Way 4Speaker, 4Ω)
Internal Type AC 110 ~ 240V, 50 / 60Hz
MAX. 240W
<
3W
Dimension
1091mm x 809.6mm x 139mm
( W x H x D )
Weights
Accessories
Remote Control, Battery (AAA type), Operating Instructions
☛☛ Design and specifications are subject to change without notice.
(Stand 282mm)
38Kg
Power Cord
43
Memo
44
Memo
ENGLISH
45
Memo
46
Memo
ENGLISH
47
P/N :
Loading...