DAIKIN AC BRC1D71 User Guide

Remote Controller Quick Guide BRC1D71 Functions

Quick User Guide - FUNCTI O N S

BRC1D71 Controller

ON/OFF 1.

Operation Light 2.

STAND BY 3.

Current Operation Mode 4.

Off 5.

9. Day/Time

10. Central Control

11. Master Controlled

12. Airflow Direction icon

13. Fan Speed

14. MODE

selection

FUNCTION 6.

TIME 7.

Temperature

Selection buttons 8.

1. ON/OFF: Start/Stop operation of the system with the ON/
OFF button.

2. Operation Light: Lit when system is operating.

3. STAND BY: Indicates that Defrost/Hotstart mode is
active.

4. Current Operation Mode display: Indicates the current

operation mode.

5. OFF: Indicates OFF is selected when programming the
schedule timer.

6. FUNCTION: Multi-purpose button used to schedule the
program timer. Refer to Operation Manual for further
details.

7. TIME: Adjust clock or, when in programming mode, adjust

programmed action time. Both features have an

auto-repeat function.

8. Temperature Selection Buttons: Used to adjust the
current setpoint or, when in programming mode, to adjust
the programmed setpoint temperature. Temperature
range is 60-90°F in 1°F increments. Can also be used to
adjust day of the week.

9. DAY/TIME The time display indicates the current time (or
the action day time when reading or programming the
schedule timer). The day of the week indicator shows the
current weekday (or the set day when reading or

programming the schedule timer).

10. CENTRAL CONTROL indicates that another controller
with higher priority is controlling or disabling operation.

11. MASTER CONTROLLED indicates that the changeover
of system is under centralized control assigned to

15. FAN SPEED

16. AIRFLOW DIRECTION

another indoor unit or optional cool/heat selector
connected to the outdoor unit.

12. AIRFLOW DIRECTION: Icon Indicates airflow
direction for motorized airflow louvers.

13. FAN SPEED Display: Three fan speeds,
L (low), H (high), HH (higher), AUTO, and FAN, are

available. Some Daikin systems do not offer AUTO or HH,
thus these options are not selectable or seen.

14. MODE selection button: Depending on prior settings,
the MODE button can select operation mode:

FAN: Fan only operation (Room air is circulated).
DRY: Cooling Operation − Unit operates to minimize

temperature change but reduces room humidity levels.
AUTO: Auto changeover − Cooling and Heating switch
automatically to maintain
COOL: Cooling Operation − To the desired setpoint
temperature.
HEAT: Heating Operation − To the desired setpoint
t em pe r a tu r e .

15. FAN SPEED Button: Toggles between AUTO
(Automatic), L (Low), H (High), HH (Very High). Toggle
only allows for available fan speeds to be selected.

16. AIRFLOW DIRECTION Button: Use to adjust airflow
direction. Press the button to switch between fixed or
variable airflow. Use the airflow icon to determine the
fixed airflow direction by pressing the airflow button until
the icon indicates the desired airflow direction.

the desired setpoint temperature.

QUG-BRC1D71_10/08

BRC1D71 Features

Qui c k U s er G u id e - FE A TUR E S

BRC1D71 Controller

AWAY 1.

Maximum Set Temp 2.

Schedule Timer 3.

Inspection Required 4.

Ventilation Mode button 6.

Minimum Set Temp 5.

10. Not Available

11. Clean Element

12. Clean Air Filter

13. Ventilation

Ventilation Amount button 7.

SCHEDULE 8.

TEST 9.

1. AWAY: The AWAY function prevents the room
temperature from dropping or rising when the occupants
are out for a period of time. If the room temperature drops

below 50°F, heating is started automatically. As soon as
59°F is reached, the controller returns to its original
status. If the room temperature rises above 85
cooling is started automatically. As soon as 74

reached, the controller returns to its original status. ON is
enabled, flashing indicates ACTIVE, if disabled it is OFF.

To ENABLE/DISABLE, press time simultaneously.

2. Maximum Set Temperature: Indicates the Maximum Set
Temperature when in limit mode operation. Use the
SETBACK button and MODE button to configure.

3. Schedule Timer: Indicates the Schedule Timer is
enabled.

°F,
°F is

14. SETBACK

15. Reset Clean Air Filter
Alert

7. Ventilation Amount button: Sets the ventilation
amount. (HRV System only.)

8. SCHEDULE: Enables or disables the Schedule Timer.

9. TEST: For servicing purposes only.

10. Not Available is displayed whenever a non-installed or
unavailable function is requested.

11. Clean Element (HRV system only).

12. Clean Air Filter Icon indicates the air filter
must be cleaned.

13. Ventilation: (HRV System only.)

14. SETBACK toggles setpoint, limit mode operation, or OFF
(for programming only). Limit Mode Operation is an
additional mode that enables keeping the room
temperature within certain limits. The min and max icons
are displayed to confirm the activation of limit operation.

4. Inspection Required: The wrench and the eye

icons indicate that inspection is required. Contact your
installer.

5. Minimum Set Temperature: Indicates the Minimum Set
Temperature when in limit mode operation. Use the
SETBACK button and MODE button to configure.

6. Ventilation Mode button: Operates the Heat Recovery
Ventilation. (HRV System only.)

QUG-BRC1D71_10/08

15. Reset Clean Air Filter Alert: Push this button after
cleaning the air filter to reset the alert timer for the next
necessary cleaning time.