Daikin EHS157056 Installation manuals

RoCon G1 Gateway
Central Control Unit

EHS157056

RoCon G1 Gateway

Intended use

 The installation of RoCon G1 Gateway must always be carried out by professional staff

who are trained in the installation and commissioning of electrical devices.

 Only operate the device in interior spaces and avoid the influence of humidity, dust as

well as insolation and heat radiation. Any other use which is not described in this
installation manual is not an intended use and leads to the exclusion of warranty and
liability. This also applies to conversions and alterations. The device is exclusively
intended for private use.

Scope of delivery

RoCon G1 Gateway Central Control Unit

Power supply unit Gateway

Mains cable

Documentation

5V

Mains cable RoCon control

Brief installation guide

Gateway connections

1 Connection of power supply unit
2 LAN network Connection
3 bus connection for RoCon control
4 Status LED

1

2

3

4

Picture 1: Connections RoCon G1

Assembly and commissioning

RoCon G1 Gateway can be mounted to the wall or
operating in an upright position. For wall mounting use the
corresponding holding brackets on the casing.

50 mm

Picture 2: Wall mounting

008.15 331 44_02

2

EHS157056