Daikin BRP069A61, BRP069A62 Installation manuals
Installation manual
Daikin Altherma LAN adapter
BRP069A61
BRP069A62
Installation manual
Daikin Altherma LAN adapter
English
Table of Contents
a a
cd c c
a
b
b
e
X1A
X2A
X3A
X4A
c
b
a
Table of Contents
1 About the documentation 2
1.1 About this document.................................................................. 2
2 About the product 2
3 About the box 3
3.1 To unpack the LAN adapter ...................................................... 3
4 Preparation 3
4.1 Installation site requirements..................................................... 3
4.2 Overview of electrical connections ............................................ 4
4.2.1 Router ......................................................................... 4
4.2.2 Indoor unit ................................................................... 4
4.2.3 Electrical meter ........................................................... 4
4.2.4 Digital outputs ............................................................. 4
5 Installation 4
5.1 Mounting the LAN adapter ........................................................ 4
5.1.1 To mount the rear casing to the wall........................... 5
5.1.2 To mount the PCB to the rear casing.......................... 5
5.2 Connecting the electrical wiring................................................. 5
5.2.1 To connect the indoor unit .......................................... 5
5.2.2 To connect the router.................................................. 6
5.2.3 To connect the electrical meter................................... 6
5.2.4 To connect the digital outputs..................................... 6
5.3 Finishing the LAN adapter installation....................................... 6
5.3.1 LAN adapter serial number ......................................... 6
5.3.2 To close the LAN adapter ........................................... 7
▪ The full set of latest technical data is available on the Daikin
extranet (authentication required).
2 About the product
The Altherma LAN adapter allows for smartphone control of Daikin
Altherma systems and, depending on the model, can be used in
various Smart Grid applications, such as the storage of selfgenerated electrical energy as thermal energy (e.g. as domestic hot
water).
The LAN adapter is available in two versions:
Model Functionality
BRP069A61 Smartphone control + Smart Grid
applications
BRP069A62 Smartphone control only
Components: casing
6 Starting up the system 7
1 About the documentation
Components: PCB
a Wall mounting holes
b Knockout holes (wiring from the rear)
c Knockout holes (wiring from the bottom)
d Ethernet connection
e Status LEDs
1.1 About this document
Target audience
Authorised installers
Documentation set
This document is part of a documentation set. The complete set
consists of:
▪ General safety precautions
▪ Safety instructions that you must read before installing
▪ Format: Paper (in the box of the indoor unit)
▪ Installation manual:
▪ Installation instructions
▪ Format: Paper (supplied in the kit)
▪ Installer reference guide:
▪ Installation instructions, configuration, application guidelines,…
▪ Format: Digital files on http://www.daikineurope.com/support-
and-manuals/product-information/
Latest revisions of the supplied documentation may be available on
the regional Daikin website or via your dealer.
The original documentation is written in English. All other languages
are translations.
Technical engineering data
▪ A subset of the latest technical data is available on the regional
Daikin website (publicly accessible).
Installation manual
2
Status LEDs
a DIP switch
b Status LEDs
c microSD card slot
LED Description Behaviour
Indication of power to the
adapter, and of normal
operation.
Indication of TCP/IP
communication with the
router.
▪ Heartbeat: normal
operation
▪ ON/OFF: no operation
▪ ON: normal
communication
▪ Flashing:
communication problem
BRP069A61+BRP069A62
Daikin Altherma LAN adapter
4P463935-1A – 2016.10
3 About the box
a
b
c
1× 1× 1×
a b c
1×
d
3× 3× 3×
f
1×
e g h4×i
1×
j
3× 4×3×
1× 1× 1×
a b c1×d
e f g
>30 mm >30 mm
>90 mm
(a)
>160 mm
(b)
LED Description Behaviour
Indication of
communication with the
indoor unit.
▪ ON: normal
communication
▪ Flashing:
communication problem
Indication of Smart Grid
(a)
activity.
ON: Smart Grid
functionality of the indoor
unit is controlled by the
LAN adapter
(a) This LED is only active for BRP069A61 (present for
BRP069A62, but always inactive).
3 About the box
3.1 To unpack the LAN adapter
1 Unpack the LAN adapter.
h Plugs to mount rear casing
i Screws to mount PCB
j Cable tie
Accessories: BRP069A62
a Installation manual
b 2-pole plug connector for X3A
c Ethernet cable
d Grommet
e Screws to mount rear casing
f Plugs to mount rear casing
g Screws to mount PCB
4 Preparation
4.1 Installation site requirements
INFORMATION
Also read the maximum cable length requirements set out
in "4.2Overview of electrical connections"on page4.
▪ Mind the following spacing installation guidelines:
a Front casing
b PCB
c Rear casing
2 Separate the accessories.
Accessories: BRP069A61
(a) Provide enough space to connect the Ethernet cable
without exceeding its minimum bend radius (typically
90mm)
(b) Provide enough space to open the casing with a flat-blade
screwdriver (typically 160mm)
▪ The LAN adapter is designed to be wall-mounted in dry, indoor
locations only. Make sure the installation surface is a flat and
vertical non-combustible wall.
▪ The LAN adapter is designed to be mounted in the following
orientation only: with the PCB on the right-hand side in the casing,
and the Ethernet connector facing the floor.
▪ The LAN adapter is designed to operate in ambient temperature
ranging from 5~35°C.
a Installation manual
b 6-pole slide connector for X1A
c 2-pole slide connector for X2A
d 2-pole plug connector for X3A
e Ethernet cable
f Grommets
g Screws to mount rear casing
BRP069A61+BRP069A62
Daikin Altherma LAN adapter
4P463935-1A – 2016.10
Installation manual
3
Loading...