Dahua VTO6000A, VTO6110B, VTO6110BW, VTO6000C, VTO6000CM User Manual

1

Digital Villa VTO (VTO6 Series)

User’s Manual

V2.0.1

Table of Contents

1 Product Overview ................................................................................................... 1

1.1 List of Models ...................................................................................................... 1

1.2 VTO6000A .......................................................................................................... 1

1.2.1 Front Panel ................................................................................................ 1

1.2.2 Rear Panel ................................................................................................ 2

1.3 VTO6110B/VTO6110BW/VTO6210B .................................................................. 2

1.3.1 Front Panel ................................................................................................ 2

1.3.2 Rear Panel ................................................................................................ 3

1.4 VTO6000C/VTO6000CM/VTO6100C .................................................................. 5

1.4.1 Front Panel ................................................................................................ 5

1.4.2 Rear Panel ................................................................................................ 7

2 Introduction to Web ................................................................................................ 9

2.1 Login ................................................................................................................... 9

2.2 System Config ..................................................................................................... 9

2.1.1 Local Config ............................................................................................ 10

2.2.2 LAN Config .............................................................................................. 12

2.2.3 Indoor Station Manager ........................................................................... 12

2.2.4 Network Config ........................................................................................ 13

2.2.5 Change Password ................................................................................... 13

2.3 Info Search ........................................................................................................ 13

2.3.1 Call History .............................................................................................. 13

2.4 Status Statistics ................................................................................................. 14

2.4.1 VTH Status .............................................................................................. 14

2.5 Logout ............................................................................................................... 14

3 Basic Function Introduction .................................................................................. 15

3.1 Call Function ..................................................................................................... 15

3.1.1 Call Manager Center ............................................................................... 15

3.1.2 Call User ................................................................................................. 16

3.1.3 Group Call ............................................................................................... 16

3.2 Monitor .............................................................................................................. 16

3.3 Unlock Function................................................................................................. 16

3.4 Issue Card ......................................................................................................... 17

3.5 Compensation of Light....................................................................................... 17

3.6 Vandal Proof ..................................................................................................... 17

3.7 Restore Backup ................................................................................................. 17

4. FAQ 18

Appendix 1 Technical Specifications ....................................................................... 19

Appendix 2 Toxic or Hazardous Materials or Elements .................. 错误!未定义书签。

Important Safeguards and Warnings

Please read the following safeguards and warnings carefully before using the product in
order to avoid damages and losses.
Note:

 Do not expose the device to lampblack, steam or dust. Otherwise it may cause

fire or electric shock.

 Do not install the device at position exposed to sunlight or in high temperature.

Temperature rise in device may cause fire.

 Do not expose the device to humid environment. Otherwise it may cause fire.
 The device must be installed on solid and flat surface in order to guarantee

safety under load and earthquake. Otherwise, it may cause device to fall off or
turnover.

 Do not place the device on carpet or quilt.
 Do not block air vent of the device or ventilation around the device. Otherwise,

temperature in device will rise and may cause fire.

 Do not place any object on the device.
 Do not disassemble the device without professional instruction.

Warning:

 Please use battery properly to avoid fire, explosion and other dangers.
 Please replace used battery with battery of the same type.
 Do not use power line other than the one specified. Please use it properly.

Otherwise, it may cause fire or electric shock.

Special Announcement

 This manual is for reference only.
 All the designs and software here are subject to change without prior written

notice.



owners.

 If there is any uncertainty or controversy, please refer to the final explanation of

us.



1

1 Product Overview

1.1 List of Models

This manual applies to multiple product models; please carefully confirm your model and
its features.

Model

Chassis
Material

Color

Unlock via
IC card

Button Type

Lock Control Module

VTO6000A

Metal

Metal
grey

N/A

Mechanical
key

External

VTO6110B

Fireproof
ABS

Black

Support

Touch button

External

VTO6110BW

Fireproof
ABS

White

Support

Touch button

External

VTO6210B

Fireproof
ABS

Black

Support

Touch button

Built-in

VTO6100C

Fireproof
ABS

White

Support

Mechanical
key

Built-in

VTO6000C

Fireproof
ABS

White

Not support

Mechanical
key

Built-in

VTO6000CM

Metal

Metal
grey

Not support

Mechanical
key

Built-in

1.2 VTO6000A

1.2.1 Front Panel

Figure 1- 1 VTO6000A

No.

Port Name

Note

1

Nameplate

You can fix company nameplate here.

2

Compensation
Light

Light compensation will automatically turn on
during monitoring, calling, or connecting status if
there is no enough light in environment.

3

Camera

It monitors corresponding door region.

4

Call Button

Call center or VTH.

5

Speaker

Audio output.

6

MIC

Audio input.

1.2.2 Rear Panel

Figure 1- 2 VTO6000A

No.

Component Name

Note

1

Power

Connect to 12V DC.

2

RS485 Port

May connect to access control extension module

3

Network Port

Plug in network cable（RJ45 port）.

1.3 VTO6110B/VTO6110BW/VTO6210B

1.3.1 Front Panel

VTO6110B, VTO6110BW and VTO6210B’s front panel is as in Figure 1- 3.

Figure 1- 3 VTO6110B/VTO6110BW/VTO6210B

No.

Component
Name

Note

1

Compensation
Light

Light compensation will automatically turn on during
monitoring, calling, or connecting status if there is no
enough light in environment.

2

Camera

It monitors corresponding door region.

3

Card Swiping

Area

Authorize IC card and unlock by swiping IC card (must

connect to access control extension module).

4

Call Button

Lightly touch button area, to call center or VTH.
Blue NO: VTO is under standby status.

1.3.2 Rear Panel

VTO6110B and VTO6110BW’s rear panel is as in Figure 1- 4 VTO6110B and
VTO6110BW.

Figure 1- 4 VTO6110B and VTO6110BW

No.

Component
Name

Note

1

Vandal
Proof
Switch

It will generate alarm sound and report to the center once
VTO is forced to leave the wall.

2

Network
Port

Plug in network cable（RJ45 port）.

3

Power

Connect to 12V DC.

4

RS485 Port

May connect to access control extension module.

5

Speaker

Audio output

VTO6210B’s rear panel is as in Figure 1- 5 VTO6210B.