Dahua SD1A series Installation Manual

Network Speed Dome Installation Manual

Version 1.0.0

i

Table of Contents

1 INSTALLATION PREPARATION ............................................................................................ 1

1.1 Basic Requirement .............................................................................................................. 1

1.2 Installation Check ................................................................................................................ 1

1.3 Cable Preparation ................................................................................................................ 1

1.3.1 The Min Specification Requirements of Cable ................................................................ 1

1.3.2 Cable Selection ............................................................................................................... 1

2 SPEED DOME INSTALLATION .............................................................................................. 2

2.1 Check Accessories .............................................................................................................. 2

2.2 Open Device ........................................................................................................................ 2

2.3 Micro SD Card Slot and Reset Button ................................................................................. 2

2.3.1 Use Reset Button ............................................................................................................ 3

2.3.2 Install Micro SD Card ...................................................................................................... 3

3 CEILING MOUNT .................................................................................................................... 4

3.1 Installation Component ........................................................................................................ 4

3.2 Device Installation ............................................................................................................... 4

3.2.1 Installation Conditions ..................................................................................................... 4

3.2.2 Installation Steps ............................................................................................................. 4

4 WALL MOUNT ......................................................................................................................... 8

4.1 Installation Component ........................................................................................................ 8

4.2 Device Installation ............................................................................................................... 8

4.2.1 Installation Conditions ..................................................................................................... 8

4.3 Installation Steps ................................................................................................................. 9

5 APPENDIX Ⅰ LIGHTNING PROOF AND SURGE PROTECTION (OUTDOORS) ............. 14

5.1 Lightning Protection (Indoors) ........................................................................................... 14

6 APPENDIX Ⅱ THE RELATIONSHIP BETWEEN DC 12V CABLE DIAMETER AND

TRANSMISSION DISTANCE ........................................................................................................ 16

7 APPENDIX Ⅳ WIRE GAUGE REFERENCE SHEET ........................................................... 18

ii

Welcome

Thank you for purchasing our speed dome!

Please read the following safeguards and warnings carefully before you install or use the
product!

iii

Important Safeguards and Warnings
Safety Measures

1. Qualified Engineer Needed

 The installation engineer or maintenance engineer shall have corresponding CCTV system

installation certificate or maintenance qualification certificate.

 The installation engineer or maintenance engineer shall have qualification certificate for work

at height.

 The installation engineer or maintenance engineer shall have the basic knowledge and

operation technique for low-voltage cable layout and low-voltage electronic cable connection.

 Please read the installation manual carefully and keep it well for future reference,

 We are not liable for any problems caused by unauthorized modifications or attempted repair.

2. Lifting Appliance Requirement

 Please select the proper speed dome installation mode and use the lifting appliances at the

safety environment.

 The lifting appliances shall have the enough capacity to reach the installation height.

 The lifting appliances shall have safe performance.

The precaution measures include two types: Warning and Note.

 Warning: It is to alert you there is an optional risk of death or series injury!
 Note: It is to alert you there is an optional risk of damage or property loss!

Warning

1. All installation and operation here should conform to your local electrical safety codes. We
assume no liability or responsibility for all the fires or electrical shock caused by improper
handling or installation.

2. Do not connect several speed domes to one power adapter. It may result in overheat or fire
if it exceeds the rated load.

3. Before you connect the cable, install or uninstall, or begin the daily maintenance work,
please turn off the power and unplug the power cable.

4. Please make sure the product is secured firmly on the wall or the ceiling.

5. Please turn off the power and unplug the power cable, If there is any smoke, disgusting
smell, or noise. Please contact your local retailer or customer service center for help.

iv

6. All the examination and repair work should be done by the qualified service engineers. We
are not liable for any problems caused by unauthorized modifications or attempted repair.

Note

1. Safety Transportation

 Heavy stress, violent vibration or water splash are not allowed during transportation, storage

and installation.

 This series product must use split type package during the transportation.

 We are not liable for any damage or problem resulting from the integrated package during

the transportation.

2. When device is malfunction

Shut down the device and disconnect the power cable immediately if there is smoke, abnormal
smell or abnormal function. Please contact your local retailer ASAP.

3. Do not try to dismantle or modify the device

 There is risk of personal injury or device damage resulting from opening the shell.
 Please contact your local retailer if there is internal setup or maintenance requirement.

 We are not liable for any problems caused by unauthorized modifications or attempted repair.

4. Do not allow other object falling into the device

 Please make sure there is no metal or inflammable, explosive substance in the speed dome.
 The above mentioned objects in the device may result in fire, short-circuit or damage.
 Please shut down the device and disconnect the power cable if there is water or liquid falling

into the camera. Please contact your local retailer ASAP.

 Please pay attention to the camera. Avoid the sea water or rain to erode the camera.

5. Handle carefully

Do not allow this series product fall down to the ground.
Avoid heavy vibration.

6. Installation Environment Requirement

 This series speed dome should be installed in a cool, dry place away from direct sunlight,

inflammable, explosive substances and etc.

 This series product shall be away from the strong electromagnetism radiant, please keep it

away from wireless power, TV transmitter, transformer and etc.

7. Daily Maintenance

 Please use the soft cloth to clean dust on the shell, or you can use soft cloth with cleaning

liquid to clean the shell and then use soft cloth to make it dry.

v

 Do not use gasoline, dope thinner or other chemical material to clean the shell. It may result

in shell transfiguration or paint flake.

 Do not allow the plastic or rubber material to touch the shell for a long time. It may result in

paint flake.

 It is highly recommended to use the product with a lightning-proof device, which can realize

better lightning-proof effect.

1

1 Installation Preparation

1.1 Basic Requirement

 All installation and operation here should conform to your local electrical safety codes.
 Before installation, please open the package and check all the components are included.

Please make sure the speed dome installation environment and installation mode can meet
your requirement. If there is special requirement, please contact your local retailer for more
information.

 We assume no liability or responsibility for all the fires or electrical shock caused by

improper handling or installation.

1.2 Installation Check

 Please make sure the installation environment has enough space to install the speed dome

and its corresponding installation components.

 Please make sure the ceiling or wall can sustain 8X weight of the speed dome and its

corresponding components.

 Please make sure the wall is thick enough to install expansion bolts (users need to prepare

by themselves).

1.3 Cable Preparation

1.3.1 The Min Specification Requirements of Cable

 75 ohm impedance.
 Full cable with copper conductor
 95% knitted copper shield

1.3.2 Cable Selection

For DC 12V power supply device, please refer to appendix Ⅱ for more details.

2

2 Speed Dome Installation

2.1 Check Accessories

Before installation, please check the accessories one by one according to the packing list.
Please make sure all the components listed are included.

2.2 Open Device

Please open the box and then take out the device, which is shown in Figure 2-1.

Figure 2-1

2.3 Micro SD Card Slot and Reset Button

Turn over the device and you can see there is a cover located on the bottom of the speed dome,
which is shown in Figure 2-2.

Figure 2-2

Use screwdriver to open the cover, and then you can see the reset button and Micro SD card slot,
which is shown in Figure 2-3.