Dahua PFS3106-4P-60, PFS3110-8P-96 User Manual

4/8-Port PoE Switch User’s Manual
V1.0.0
Important Safeguards and Warnings
Attention:
Please read the following safeguards and warnings carefully before using the product in order to avoid
damages and losses.
shock.
Do not install the device at position exposed to sunlight or in high temperature. Temperature rise in
device may cause fire.
Do not expose the device to humid environment. Otherwise it may cause fire.
The device must be installed on solid and flat surface in order to guarantee safety under load and
earthquake. Otherwise, it may cause device to fall off or turnover.
Do not place the device on carpet or quilt.
Do not block air vent of the device or ventilation around the device. Otherwise, temperature in
device will rise and may cause fire.
Do not place any object on the device.
Do not disassemble the device without professional instruction.
Warning:
Please use battery properly to avoid fire, explosion and other dangers.
Please replace used battery with battery of the same type.
Do not use power line other than the one specified. Please use it properly. Otherwise, it may cause
fire or electric shock.
Special Announcement:
This manual is for reference only.
All the designs and software here are subject to change without prior written notice.
All trademarks and registered trademarks are the properties of their respective owners.
If there is any uncertainty or controversy, please refer to the final explanation of us.
Please visit our website for more information.
Applicable Models:
The manual can be applied to the following models: PFS3106-4P-60, PFS3110-8P-96
Table of Contents
Important Safeguards and Warnings........................................................................................2
Table of Contents.........................................................................................................................3
1Product Overview......................................................................................................................4
1.1Features........................................................................................................................................................4
1.2Typical Application .....................................................................................................................................4
2Device Structure........................................................................................................................6
2.14-Port PoE Switch........................................................................................................................................6
2.28-Port PoE Switch......................................................................................................................................10
3Installation Guide....................................................................................................................13
Appendix 1 Technical Specification.........................................................................................14
1 Product Overview
1.1 Features
Common Features:
Two-layer industrial POE switch.
Conform IEEE802.3, IEEE802.3u, IEEE802.3ab/z and IEEE802.3X standards.
MAC auto study and aging, MAC address list capacity is 8K.
All ports self-adapt MDI/MDIX mode.
All the10/100M self-adaptive RJ45 ports support IEEE802.3af, IEEE802.3at standard power
supply.
Industrial wide temperature design.
Adopt metal structure.
Support DC 53V power supply.
Individual Features:
4-port PoE switch 1 100/1000M self-adaptive SFP fiber port, 1 10/100/1000M self-adaptive
RJ45 port and 4 10/100M self-adaptive RJ 45 ports.
4-port PoE switch with 60W power adapter.
8-port PoE switch supports 1 1000M SFP fiber port, 1 10/100/1000M self-adaptive RJ45 port
and 8 10/100M self-adaptive RJ 45 ports.
8-port PoE switch with 96W power adapter.
1.2 Typical Application
The typical application of the device is shown in Figure 1- 1
4
Figure 1- 1
5
Loading...
+ 10 hidden pages