Dahua ITC237-PW1B-IRZ,ITC237-PU1B-IR,ITC237-PU1B-L User Manual

i

2.0 MP CMOS HD Camera User’s Manual

Version 1.0.0

ii

Welcome

Thank you for purchasing our HD intelligent traffic camera!
This user’s manual is designed to be a reference tool for your system.
Please read the following safeguard and warnings carefully before you use this series product!
Please keep this user’s manual well for future reference!

iii

Important Safeguards and Warnings

1．Electrical safety

All installation and operation here should conform to your local electrical safety codes.
The power shall conform to the requirement in the SELV (Safety Extra Low Voltage) and the Limited
power source is rated 90-240V.
We assume no liability or responsibility for all the fires or electrical shock caused by improper handling
or installation.

2．Transportation security

Heavy stress, violent vibration or water splash are not allowed during transportation, storage and
installation.
Please keep package material well in case you need to send it back to your local retailer or
manufacturer for maintenance work.
Non-original package material may result in device damage during the transportation.

3．Installation

Do not apply power to the camera before completing installation.
Please install the proper power cut-off device during the installation connection in case there is any
emergency situation.
Always follow the instruction guide the manufacturer recommended.

4．Qualified engineers needed

Do not replace the button cell on the internal circuit of the main board without the prior authorization.
Improper button cell type may result in risk of explosive.
Please process the used button cells properly according to its usage instruction.
All the examination and repair work should be done by the qualified service engineers.
We are not liable for any problems caused by unauthorized modifications or attempted repair.

5．Environment

This series camera should be installed in a cool, dry place away from direct sunlight or strong light,
inflammable, explosive substances and etc.
The working temperature ranges from -30℃ ~ to +60℃. Do not touch the external metal part of the
device when it is working in harsh environments.
Please keep it away from the electromagnetic radiation object and environment.
Please keep the sound ventilation.
Do not allow the water and other liquid falling into the camera.
Usually we recommend thunder-proof device to prevent thunder strike.
The GND port of the product shall be grounded to further enhance the reliability of the device.

iv

7.Daily Maintenance

Please shut down the device and then unplug the power cable before you begin daily maintenance
work.
Use the dry soft cloth to clean the device.
If there is too much dust, please use the water to dilute the mild detergent first and then use it to clean
the device. Finally use the dry cloth to clean the device.

8. Accessories

Be sure to use all the accessories recommended by manufacturer.
Before installation, please open the package and check all the components are included.
Contact your local retailer ASAP if something is broken in your package.
You may install the device if nothing is missing or broken in your package.

v

Table of Contents

1 General Introduction ............................................................................................... 1

1.1 Overview ................................................................................................... 1

1.2 Features ................................................................ ................................ .... 1

2 Framework ............................................................................................................ 3

2.1 Appearance ............................................................................................... 3

2.2 Product Structure ....................................................................................... 3

2.3 Port ................................................................................................ ........... 4

2.3.1 Device Wiring ....................................................................................... 4

2.3.2 Rear Panel ........................................................................................... 5

3 Device Installation .................................................................................................. 8

3.1 Lens Installation ......................................................................................... 8

3.1.1 Auto Iris Lend Installation ...................................................................... 8

3.1.2 I/O Port ................................................................................................ 8

3.2 Device Installation ...................................................................................... 9

3.2.1 (Optional) Install SD Card ..................................................................... 9

3.2.2 Adjust Device Direction ................................ ................................ ......... 9

3.2.3 (Optional) Install Network Port Waterproof Cover ................................ .. 10

4 System Network ................................................................................................... 12

5 Quick Configuration Tool ...................................................................................... 13

5.1 Overview ................................................................................................. 13

5.2 Operation................................................................ ................................. 13

6 Web Operation..................................................................................................... 16

6.1 First Time Log in ...................................................................................... 16

6.2 Non-first Time Login ................................................................ ................. 18

6.3 System Menu ................................ ........................................................... 18

7 Technical Specification ......................................................................................... 20

8 FAQ ................................................................ ................................ .................... 22

1

1 General Introduction

1.1 Overview

This product can monitor entrance/exit status and clearly snapshot vehicle plate in both day and
night time. It can analyze and process plate snapshot.
This series of product integrates video data capture and management as video surveillance of
road monitoring core. It can snapshot different scenes, and send video data to controller via
Internet or to central control department, back-end storage device for management.
It is widely applied in entrance/exit monitor system.

1.2 Features

White List

 Set whether vehicle to have open gate right or not.

OSD

 Set picture OSD info and position, video channel related info can be set

in camera setup page.

User

Management

 Different user rights for each group and you may modify the setup

anytime.

 The user right cannot exceed the right setup.
 Support 2-level user.

Log

Management

 Support 1024 log.
 Support account right setup.

Storage

Function

 Support FTP and offline transfer.
 According to user config and strategy store video data to central server.
 User can record via WEB. Record files are saved on PC where client is

installed.

 Local hot swap, offline transfer. Picture can be overwritten auto for

capacity warning.

Alarm

Function

 For camera abnormity, it can send alarm via network, such as storage

damage.

 Real-time respond to external alarm input( within 200MS) as user pre-

defined activation setup and exert corresponding message in screen
and audio prompt(allow user to pre-record audio file).

Network

Monitor

 HD intelligent traffic camera supports one-channel A/V data transmit to

network terminal and then decode. Allowed by the band width, delay is
less than 500ms.

 Max supports 10 connections.
 Adopt the following A/V transmission protocol: HTTP, TCP, UDP,

MULTICAST and RTP/RTCP and etc.

 Support web access, widely used in WAN.

Snapshot

 Snapshot picture and encode, with watermark.
 Snapshot picture can auto record vehicle time, location, plate color and

ANPR info.

Recognition

 Support plate, vehicle color recognition function.

Network

Management

 Realize HD intelligent traffic camera configuration and management via

Ethernet.

 Support device management via web.

2

Peripheral

Equipment

 Support peripheral equipment management, each peripheral equipment

control protocol and interface can be set freely.

 Support activation devices such as vehicle detector.

Power

Supplying

 ITC237-PW1B-IRZ：DC 12V / PoE power supply.
 ITC237-PU1B-L, ITC237-PU1B-IR device：AC 24V / DC 12V / PoE

power supply.

Auto White

Balance

 The white balance refers to the camera to restore the white object color.

It allows the camera to adjust the color temperature in indoor and
outdoor environment.

Auto

Exposure

 System can automatically set shutter speed and iris value according to

the snapshot video exposure condition.

Auto Gain

 To output the standard video signal in the different illumination

environments, the amplifier needs to adjust in a wide range. The system
can enhance the camera sensitivity in low illumination and enhance the
video signal output to get the clear and high definition video.

Assistant

Function

 Support video watermark function to avoid vicious video modification.
 Log
 System resource info and operation live display.

3

2 Framework

2.1 Appearance

Figure 2-1 ITC237-PW1B-IRZ

Figure 2-2 ITC237-PU1B-IR, ITC237-PU1B-L

2.2 Product Structure

4

Figure 2-3 ITC237-PW1B-IRZ

Figure 2-4 ITC237-PU1B-IR, ITC237-PU1B-L

2.3 Port

2.3.1 Device Wiring

Note:
This figure is for ITC237-PW1B-IRZ.