Dahua IPC-HFW8101E, IPC-HFW8101E-Z, IPC-HFW8201E, IPC-HFW8201E-Z, IPC-HFW8301E User Manual
...
Dahua HD IR WDR Network Camera User’s Manual
Version 1.1.0
Zhejiang Dahua Technology CO., LTD
i
Welcome
Thank you for purchasing our network camera!
This user’s manual is designed to be a reference tool for your system.
Please read the following safeguard and warnings carefully before you use this series product!
Please keep this user’s manual well for future reference!
ii
Important Safeguards and Warnings
1．Electrical safety
All installation and operation here should conform to your local electrical safety codes.
The power shall conform to the requirement in the SELV (Safety Extra Low Voltage) and the Limited
power source is rated 12V DC or 24V AC in the IEC60950-1. (Refer to general introduction)
Please note: Do not connect two power supplying sources to the device at the same time; it may
result in device damage! The product must be grounded to reduce the risk of electronic shock.
We assume no liability or responsibility for all the fires or electrical shock caused by improper handling
or installation.
We are not liable for any problems caused by unauthorized modification or attempted repair.
2．Transportation security
Heavy stress, violent vibration or water splash are not allowed during transportation, storage and
installation.
3．Installation
Do not apply power to the camera before completing installation.
Please install the proper power cut-off device during the installation connection.
Always follow the instruction guide the manufacturer recommended.
4．Qualified engineers needed
All the examination and repair work should be done by the qualified service engineers.
We are not liable for any problems caused by unauthorized modifications or attempted repair.
5．Environment
This series network camera should be installed in a cool, dry place away from direct sunlight,
inflammable, explosive substances and etc.
Please keep it away from the electromagnetic radiation object and environment.
Please make sure the CCD (CMOS) component is out of the radiation of the laser beam device.
Otherwise it may result in CCD (CMOS) optical component damage.
Please keep the sound ventilation.
Do not allow the water and other liquid falling into the camera.
Thunder-proof device is recommended to be adopted to better prevent thunder.
The grounding studs of the product are recommended to be grounded to further enhance the reliability
of the camera.
6. Daily Maintenance
Please shut down the device and then unplug the power cable before you begin daily maintenance
work.
iii
Do not touch the CCD (CMOS) optic component. You can use the blower to clean the dust on the lens
surface.
Always use the dry soft cloth to clean the device. If there is too much dust, please use the water to
dilute the mild detergent first and then use it to clean the device. Finally use the dry cloth to clean the
device.
Please put the dustproof cap to protect the CCD (CMOS) component when you do not use the camera.
Dome enclosure is the optical component, do not touch the enclosure when you are installing the
device or clean the enclosure when you are doing maintenance work. Please use professional optical
clean method to clean the enclosure. Improper enclosure clean method (such as use cloth) may result
in poor IR effect of camera with IR function.
7. Accessories
Be sure to use all the accessories recommended by manufacturer.
Before installation, please open the package and check all the components are included.
Contact your local retailer ASAP if something is broken in your package.
Accessory Name
Amount
Network Camera Unit
1
Quick Start Guide
1
Installation Accessories Bag
1
CD
1
Warranty Card and Certificate
1
iv
Table of Contents
1 General Introduction .................................................................................................................. 1
1.1 Overview ........................................................................................................................ 1
1.2 Features ......................................................................................................................... 1
1.3 Specifications ................................................................................................................ 2
1.3.1 Performance ........................................................................................................... 2
2 Framework ................................................................................................................................. 10
2.1 Cable ............................................................................................................................ 10
2.2 Framework and Dimension ....................................................................................... 11
3 Device Installation .................................................................................................................... 13
4 Quick Configuration Tool ......................................................................................................... 15
4.1 Overview ...................................................................................................................... 15
4.2 Operation ..................................................................................................................... 15
5 Web Operation .......................................................................................................................... 17
5.1 Network Connection ................................................................................................... 17
5.2 Login and Main Interface ........................................................................................... 17
6 FAQ ............................................................................................................................................ 19
Appendix Toxic or Hazardous Materials or Elements ............................................................... 20
1
1 General Introduction
1.1 Overview
This series network camera integrates the traditional camera and network video technology. It adopts
video data collection, transmission together. It can connect to the network directly without any auxiliary
device.
This series network camera uses standard H.264 video compression technology, which maximally
guarantees the video quality.
It supports the IR night vision function. In the night environments, the device can use the IR light to
highlight the object which is suitable for the surveillance function in the low illumination environments.
The built-in waterproof design conforms to the IP 66 level. It has the sound waterproof function
suitable for use in the outdoor environments.
It can be used alone or used in a network area. When it is used lonely, you can connect it to the
network and then use a network client-end. Due to its multiple functions and various uses, this series
network camera is widely used in many environments such as home, office, bank, road monitor and
etc.
1.2 Features
User
Management
Different user rights for each group, one user belongs to one group.
The user right shall not exceed the group right.
Storage
Function
Support central server backup function in accordance with your configuration
and setup in alarm or schedule setting
Support record via Web and the recorded file are storage in the client-end
PC.
Support network storage function such as FTP.
Data
Transmission
Support data transmission via Ethernet.
Network
Monitor
Network camera supports one-channel video data transmit to network
terminal and then decode. Delay is within 270ms (network bandwidth support
needed)
Max supports 20 connections.
Adopt the following video transmission protocol: HTTP, TCP, UDP,
MULTICAST, RTP/RTCP, RTSP and etc.
Support web access.
Network
Management
Realize network camera configuration and management via Ethernet.
Support device management via web or client-end.
Support abundant network protocols.
Power
External power adapter DC12V.
Support PoE.
Warning！
Do not connect these two power supplying sources to the device at the
same time; it may result in device damage!
Assistant
Function
Log function
Support system resource information and running status real-time display.
Day/Night mode auto switch.(with ICR switch)
Support picture parameter setup such as electronic shutter and gain setup.
Backlight compensation: screen auto split to realize backlight compensation
to adjust the bright.
2
Support digital WDR.
Support video watermark function to avoid vicious video modification.
Support dual bit streams, ACF.
1.3 Specifications
1.3.1 Performance
Please refer to the following sheet for network camera performance specification.
Model
Parameter
IPC-HFW8101E
IPC-HFW8101E-Z
System
Main
Processor
TI high performance DSP
OS
Embedded LINUX
System
Resources
Support real-time network, local record, and remote operation at the same
time.
User Interface
Remote operation interface such as WEB, DSS, PSS
System Status
Bit stream statistics, log, and software version.
Video Pa
rameter
Image Sensor
1/3-inch CMOS
Pixel
1280(H)×1024(V)
Illumination
0.01Lux/F1.2（color mode），0Lux（IR light on）
SNR
More than 52dB
Day/Night
Mode
Support IR-CUT electromagnetic switch
Auto Aperture
DC drive
Gain Control
Manual/Auto
White Balance
Manual/Auto
Motorized
zoom focus
N/A
NR
Support 3D NR
WRD
120dB WDR
BLC
Off/On
Electronic
Shutter
Manual/Auto
It ranges from 1/3 to 1/30000.
Video
Compression
Standard
H.264/H.264H/H.264B/MJPEG
Video Frame
Rate
PAL:
Main stream Max(1280*1024@25fps), Extra stream Max(704*576@25fps),
Third stream Max(1280*1024@25fps)
3
NTSC:
Main stream Max(1280*1024@30fps), Extra stream Max(704*480@30fps),
Third stream Max(1280*1024@30fps)
Video Bit Rate
16kbps～14Mbps adjustable
Support customized setup.
Video Flip
Support rotate mode
Snapshot
Max 1f/s snapshot. File extension name is JPEG
Privacy Mask
support max 4 privacy mask zones
Video Setup
Support parameter setup such as bright, contrast, acutance.
Video
Information
Channel title, time title, motion detect, tampering detect.
Intelligent
Detection
Tripwire, cross warning zone, abandoned /missing object detection, scene
change detection, defocus detection.
Face
Recognition
Detect face in video and link according to the result.
Audio
Detection
Detect if there is audio input, filter noise, scream emergency and etc.
Anti-IR
Overexposure
Auto detect image brightness, anti-overexposure via internal algorithm, and
guarantee background brightness at the same time.
Lens
2.7mm～12mm/F1.4 support external
focus function
3mm ～ 9mm@F1.2 motorized varifocal lens
Lens Interface
φ14 interface, default lens
Video
Interface
1-ch composite analog video output
Audio
Audio Input
1-channel， 3.5mm JACK LINE IN
Audio Output
1-channel， 3.5mm JACK LINE OUT
Audio Bit Rate
64kbps 16bit
Audio
Compression
Standard
G.711a/G.711Mu
Video
Motion Detect
396 (18*22) detection zones; sensitivity level ranges from 0 to 100; area
threshold ranges from 0 to 100.
Activation event, video storage, snapshot, log, email function and etc.
Alarm Interface
1-ch input, 1-ch output (on/off)
Record
and
Backup
Record
Priority
Manual >Video detect>Schedule
Local Storage
Support Micro SD card storage, Max 64GB
Network
Wire Network
1-channel 100M/1000M Ethernet, RJ45 port.
Network
Protocol
Standard HTTP, TCP/IP, ARP, IGMP, ICMP, RTSP, RTP, UDP, RTCP, SMTP,
FTP, DHCP, DNS, DDNS, PPPOE, UPNP, NTP, Bonjour, SNMP
Remote
Operation
Monitor, system setup, file download, log information, maintenance , upgrade
and etc
Protocol
ONVIF(default) , GB28181
Reset
Reset button on front panel
IR Light
IR distance 30 meters
Ge
ner
al
Par
Power
Support AC24V/POE or DC12V/POE power supply
Power
Max 14W (IR enabled)
Loading...