Dahua IPC-HFW5202C, IPC-HFW5100H, IPC-HFW5200C, IPC-HFW5200H, IPC-HFW5202H User Manual

HD IR Waterproof Fixed Network Camera User’s Manual

Version 1.1.0

i

Welcome

Thank you for purchasing our network camera!
This user’s manual is designed to be a reference tool for your system.
Please read the following safeguard and warnings carefully before you use this series product!
Please keep this user’s manual well for future reference!

ii

Important Safeguards and Warnings

1．Electrical safety

All installation and operation here should conform to your local electrical safety codes.
The power shall conform to the requirement in the SELV (Safety Extra Low Voltage) and the Limited
power source is rated 12V DC or 24V AC in the IEC60950-1. (Refer to general introduction) Please

note: Do not connect two power supplying sources to the device at the same time; it may result
in device damage! The product must be grounded to reduce the risk of electronic shock.

We assume no liability or responsibility for all the fires or electrical shock caused by improper handling
or installation.
We are not liable for any problems caused by unauthorized modification or attempted repair.

2．Transportation security

Heavy stress, violent vibration or water splash are not allowed during transportation, storage and
installation.

3．Installation

Do not apply power to the camera before completing installation.
Please install the proper power cut-off device during the installation connection.
Always follow the instruction guide the manufacturer recommended.

4．Qualified engineers needed

All the examination and repair work should be done by the qualified service engineers.
We are not liable for any problems caused by unauthorized modifications or attempted repair.

5．Environment

This series network camera should be installed in a cool, dry place away from direct sunlight,
inflammable, explosive substances and etc.
Please keep it away from the electromagnetic radiation object and environment.
Please make sure the CCD (CMOS) component is out of the radiation of the laser beam device.
Otherwise it may result in CCD (CMOS) optical component damage.
Please keep the sound ventilation.
Do not allow the water and other liquid falling into the camera.
Thunder-proof device is recommended to be adopted to better prevent thunder.
The grounding studs of the product are recommended to be grounded to further enhance the reliability
of the camera.

6. Daily Maintenance

Please shut down the device and then unplug the power cable before you begin daily maintenance
work.

iii

Do not touch the CCD (CMOS) optic component. You can use the blower to clean the dust on the lens
surface.
Always use the dry soft cloth to clean the device. If there is too much dust, please use the water to
dilute the mild detergent first and then use it to clean the device. Finally use the dry cloth to clean the
device.
Please put the dustproof cap to protect the CCD (CMOS) component when you do not use the camera.
Dome enclosure is the optical component, do not touch the enclosure when you are installing the
device or clean the enclosure when you are doing maintenance work. Please use professional optical
clean method to clean the enclosure. Improper enclosure clean method (such as use cloth) may result
in poor IR effect of camera with IR function.

7. Accessories

Be sure to use all the accessories recommended by manufacturer.
Before installation, please open the package and check all the components are included.
Contact your local retailer ASAP if something is broken in your package.

Accessory Name

Amount

Network Camera Unit

1

Quick Start Guide

1

Installation Accessories Bag

1

12V to 24V Conversion Cable
(For AC 24V series product only)

1

CD

1

iv

Table of Contents

1 General Introduction ...................................................................................................... 1

1.1 Overview ........................................................................................................... 1

1.2 Features ............................................................................................................ 1

1.3 Specifications .................................................................................................... 2

1.3.1 Performance ............................................................................................... 2

2 Framework..................................................................................................................... 4

2.1 Multiple-function Combination Cable................................................................. 8

2.2 Framework and Dimension ................................................................ ............... 9

2.3 Bidirectional talk ................................................................ .............................. 10

2.3.1 Device-end to PC-end............................................................................... 10

2.3.2 PC-end to the device-end ......................................................................... 10

2.4 Alarm Setup ................................ ................................ .................................... 10

3 Device Installation ....................................................................................................... 12

3.1 Device Installation ........................................................................................... 12

3.2 Install Micro SD Card ...................................................................................... 12

3.3 Adjust Lens ..................................................................................................... 13

3.4 Adjust Bracket ................................................................................................. 14

3.5 Button.............................................................................................................. 15

4 Quick Configuration Tool ............................................................................................. 17

4.1 Overview ......................................................................................................... 17

v

4.2 Operation ........................................................................................................ 17

5 Web Operation ............................................................................................................ 19

5.1 Network Connection ........................................................................................ 19

5.2 Login and Main Interface ................................................................................. 19

6 FAQ ............................................................................................................................. 21

Appendix Toxic or Hazardous Materials or Elements ........................................................ 22

1

1 General Introduction

1.1 Overview

This series network camera integrates the traditional camera and network video technology. It adopts
audio and video data collection, transmission together. It can connect to the network directly without
any auxiliary device.

This series network camera uses standard H.264 video compression technology and G.711a audio
compression technology, which maximally guarantee the audio and video quality.

It supports the IR night vision function. In the night environments, the device can use the IR light to
highlight the object which is suitable for the surveillance function in the low illumination environments.
The built-in protection enclosure and waterproof design conforms to the IP 66 level. It has the sound
waterproof function suitable for use in the outdoor environments.

It supports real-time monitor and listening at the same time. It supports analog video output and dual­way bidirectional talk.

It can be used alone or used in a network area. When it is used lonely, you can connect it to the
network and then use a network client-end. Due to its multiple functions and various uses, this series
network camera is widely used in many environments such office, bank, road monitor and etc.

1.2 Features

User

Management

 Different user rights for each group, one user belongs to one group.
 The user right shall not exceed the group right.

Storage

Function

 Support central server backup function in accordance with your configuration

and setup in alarm or schedule setting

 Support record via Web and the recorded file are storage in the client-end

PC.

 Support built-in SD card.
 Do not support local SD card hot swap storage function. Support short-time

storage when encounter disconnection.

 Support network storage function such as FTP.

Alarm

Function

 Real-time respond to external on-off alarm input, and video detect as user

pre-defined activation setup and generate corresponding message in screen
and audio prompt(allow user to pre-record audio file)

 Real-time video detect: motion detect, camera masking.

Network

Monitor

 Network camera supports one-channel audio/video data transmit to network

terminal and then decode. Delay is within 270ms (network bandwidth support
needed)

 Max supports 20 connections.
 Adopt the following audio and video transmission protocol: HTTP, TCP, UDP,

MULTICAST, RTP/RTCP, RTSP and etc.

 Support web access.

Network

Management

 Realize network camera configuration and management via Ethernet.
 Support device management via web or client-end.

Power

 External power adapter DC12V/AC 24V. You can select according to your

actual environments. Please note system can not support these two types of
power supplying at the same time.

2

Assistant

Function

 Log function
 Support system resource information and running status real-time display.
 Day/Night mode auto switch.
 Built-in IR light. Support IR night vision.
 Support picture parameter setup such as electronic shutter and gain setup.
 Backlight compensation: screen auto split to realize backlight compensation

to adjust the bright.

 Support video watermark function to avoid vicious video modification.
 The enclosure conforms to the IP 66 protection. Has the waterproof function.

1.3 Specifications

1.3.1 Performance

Please refer to the following sheet for network camera performance specification.

Model
Parameter

IPC-HFW5100C(-H)

IPC-HFW5200C(-H)

IPC-HFW5202C(-H)

System

Main Processor

High performance DSP

OS

Embedded LINUX

System
Resources

Support real-time network, local record, and remote operation at the
same time.

User Interface

Remote operation interface such as WEB, DSS, PSS

System Status

Micro SD card status, bit stream statistics, log, and software version.

Video Parameter

Image Sensor

1/3.0-inch CMOS

1/2.9-inch CCD

Pixel

1280(H)*960(V)

1920(H)*1080(V)

Day/Night Mode

Support day/night mode switch and IR-CUT at the same time.

Auto Aperture

Enable

Gain Control

Fixed/Auto

White Balance

Manual/Auto

BLC

Off/BLC(default or custom)/WDR (0-100 adjustable)/HLC(0-100
adjustable)

Exposure Mode

Manual/Auto
It ranges from 1/3 to 1/100000.

Video
Compression
Standard

H.264/H.264H/MJPEG

Video Frame
Rate

PAL:
Main stream
(1.3M@25fps,
720P@25fps)
extra stream
(D1@25fps,
CIF@25fps)

PAL:
Main stream (1080P@25fps),
extra stream (D1@25fps, CIF@25fps)

NTSC:
Main stream
(1.3M@30fps,
720P@30fps)
extra stream
(D1@30fps,
CIF@30fps)

NTSC:
Main stream (1080P@30fps),

extra stream (D1@30fps, CIF@30fps)

Video Bit Rate

H.264: 32-8192Kbps
adjustable
MJPEG: 32­12288Kbps
adjustable and bit rate
is adjustable.

H.264: 32-8192Kbps adjustable
MJPEG: 32-16384Kbps adjustable and bit rate
is adjustable.
Support customized setup.

3

Support customized
setup.

Video Flip

Support mirror and flip function.

Snapshot

Max 1f/s snapshot. File extension name is JPEG.

Privacy Mask

Supports max 4 privacy mask zones

Video Setup

Support parameter setup such as bright, contrast.

Video
Information

Channel title, time title, motion detect, camera masking.

Lens

Manual 2.8~12mm
@F1.4

Manual

3.3~12mm@F1.4

Motorized
3~9mm@F1.4

Lens Interface

Φ14. Lens is the default accessories

Audio

Audio Input

1-channel,RCA

Audio Output

1-channel, RCA

Bidirectional
Talk Input

Reuse the first audio input channel

Audio Bit Rate

16kbps 16BIT

Audio
Compression
Standard

G.711A/G.711Mu/PCM

Video

Motion Detect

396 (18*22) detection zones; sensitivity level ranges from 0 to 100;
area threshold ranges from 0 to 100.
Activation event: video storage, image snapshot, log, email function
and etc.

Alarm Input

2-channel input,1-channel output

Record and

Backup

Record Priority

Manual>External alarm >Video detect>Schedule

Local Storage

Support Micro SD card hot swap

Storage
Management

Support display local storage status

Network

Wire Network

1-channel wire Ethernet port, 10/100 Base-T Ethernet

Network Protocol

Standard HTTP, TCP/IP, ARP, IGMP, ICMP, RTSP, RTP,UDP, RTCP,
SMTP, FTP, DHCP, DNS, DDNS, PPPOE, UPNP, NTP, Bonjour,
SNMP.

Remote
Operation

Monitor, system setup, file download, log information, maintenance ,
upgrade and etc

AUX

Interfa

ce

Video Output

1-channel analog video output,BNC port

Reset

Reset button

General Parameter

Power

AC 24V/PoE or DC 12V/PoE

Power
Consumption

7.5W MAX (-H series≤9W)

8.5W MAX (-H series
≤11.5W, PoE (AT
standard))

Working
Temperature

-30℃~+60℃(-H: -40°~60°)

Working
Humidify

≤95%

Dimensions(mm)

φ104×306.7

Weight

1250g(Excluding box)

Installation

Bracket is included as default.

IR Distance

20~30m

Protection Level

IP66

Note

Model with “-H” means it has electrical heating, otherwise, it does not