Dahua IPC-HFW5100C, IPC-HFW5200C User Manual
HD IR Waterproof Fixed Network Camera
User’s Manual
Version 1.0.0
i
Welcome
Thank you for purchasing our network camera!
This user’s manual is designed to be a reference tool for your system.
Please read the following safeguard and warnings carefully before you use this series product!
Please keep this user’s manual well for future reference!
ii
Important Safeguards and Warnings
1．Electrical safety
All installation and operation here should conform to your local electrical safety codes.
The power shall conform to the requirement in the SELV (Safety Extra Low Voltage) and the Limited
power source is rated 12V DC or 24V AC in the IEC60950-1. (Refer to general introduction) Please
note: Do not connect two power supplying sources to the device at the same time; it may result
in device damage!
We assume no liability or responsibility for all the fires or electrical shock caused by improper handling
or installation.
We are not liable for any problems caused by unauthorized modification or attempted repair.
2．Transportation security
Heavy stress, violent vibration or water splash are not allowed during transportation, storage and
installation.
3．Installation
Do not apply power to the camera before completing installation.
Please install the proper power cut-off device during the installation connection.
Always follow the instruction guide the manufacturer recommended.
4．Qualified engineers needed
All the examination and repair work should be done by the qualified service engineers.
We are not liable for any problems caused by unauthorized modifications or attempted repair.
5．Environment
This series network camera should be installed in a cool, dry place away from direct sunlight,
inflammable, explosive substances and etc.
Please keep it away from the electromagnetic radiation object and environment.
Please make sure the CCD (CMOS) component is out of the radiation of the laser beam device.
Otherwise it may result in CCD (CMOS) optical component damage.
Please keep the sound ventilation.
Do not allow the water and other liquid falling into the camera.
Thunder-proof device is recommended to be adopted to better prevent thunder.
The grounding studs of the product are recommended to be grounded to further enhance the reliability
of the camera.
6. Daily Maintenance
Please shut down the device and then unplug the power cable before you begin daily maintenance
work.
iii
Do not touch the CCD (CMOS) optic component. You can use the blower to clean the dust on the lens
surface.
Always use the dry soft cloth to clean the device. If there is too much dust, please use the water to
dilute the mild detergent first and then use it to clean the device. Finally use the dry cloth to clean the
device.
Please put the dustproof cap to protect the CCD (CMOS) component when you do not use the camera.
Dome enclosure is the optical component, do not touch the enclosure when you are installing the
device or clean the enclosure when you are doing maintenance work. Please use professional optical
clean method to clean the enclosure. Improper enclosure clean method (such as use cloth) may result
in poor IR effect of camera with IR function.
7. Accessories
Be sure to use all the accessories recommended by manufacturer.
Before installation, please open the package and check all the components are included.
Contact your local retailer ASAP if something is broken in your package.
Accessory Name
Amount
Network Camera Unit
1
Quick Start Guide
1
Installation Accessories Bag
1
12V to 24V Conversion Cable
(For AC 24V series product only)
1
CD
1
iv
Table of Contents
1 General Introduction .............................................................................................................. 1
1.1 Overview ................................................................................................................... 1
1.2 Features ................................................................................................ .................... 1
1.3 Specifications ........................................................................................................... 2
1.3.1 Performance ...................................................................................................... 2
2 Structure ................................................................................................................................. 4
2.1 Multiple-function Combination Cable ..................................................................... 4
2.2 Framework and Dimension ..................................................................................... 5
2.3 Bidirectional talk ....................................................................................................... 6
2.3.1 Device-end to PC-end ....................................................................................... 6
2.3.2 PC-end to the Device-end ................................................................................ 6
2.4 Alarm Setup ................................ .............................................................................. 6
3 Installation .............................................................................................................................. 9
3.1 Device Installation .................................................................................................... 9
3.2 Micro SD Card Installation ...................................................................................... 9
3.3 Lens Adjustment..................................................................................................... 10
3.4 Bracket Adjustment ................................................................................................ 11
4 Quick Configuration Tool .................................................................................................... 12
4.1 Overview ................................................................................................................. 12
4.2 Operation ................................................................................................................ 12
5 Web Operation ..................................................................................................................... 14
5.1 Network Connection............................................................................................... 14
5.2 Login and Main Interface ....................................................................................... 14
6 FAQ ....................................................................................................................................... 17
7 Appendix Toxic or Hazardous Materials or Elements ...................................................... 18
1
1 General Introduction
1.1 Overview
This series network camera integrates the traditional camera and network video technology. It adopts
audio and video data collection, transmission together. It can connect to the network directly without
any auxiliary device.
This series network camera product uses standard H.264 video compression technology and PCM，
G.711a audio compression technology, which maximally guarantee the audio and video quality.
It supports the IR night vision function. In the night environments, the device can use the IR light to
highlight the object which is suitable for the surveillance function in the low illumination environments.
The built-in protection enclosure and waterproof design conforms to the IP 66 level. It has the sound
waterproof function suitable for use in the outdoor environments.
It supports real-time monitor and listening at the same time. It supports analog video output and dualway bidirectional talk.
It can be used alone or used in a network area. When it is used lonely, you can connect it to the
network and then use a network client-end. Due to its multiple functions and various uses, this series
network camera is widely used in many environments such office, bank, road monitor and etc.
1.2 Features
User
Management
Different user rights for each group, one user belongs to one group.
The user right shall not exceed the group right.
Storage
Function
Support central server backup function in accordance with your configuration and
setup in alarm or schedule setting
Support record via Web and the recorded file are storage in the client-end PC.
Support built-in Micro SD card.
Do not support local Micro SD card hot swap storage function. Support short-time
storage when encounter disconnection.
Support network storage function such as FTP.
Alarm
Function
Real-time respond to external on-off alarm input, and video detect as user pre-
defined activation setup and generate corresponding message in screen and
audio prompt(allow user to pre-record audio file)
Real-time video detect: motion detect, camera masking.
Network
Monitor
Network camera supports one-channel audio/video data transmit to network
terminal and then decode. Delay is within 300ms (network bandwidth support
needed)
Max supports 20 connections.
Adopt the following audio and video transmission protocol: HTTP, TCP, UDP,
MULTICAST, RTP/RTCP, RTSP and etc.
Support web access.
Network
Management
Realize network camera configuration and management via Ethernet.
Support device management via web or client-end.
Power
External power adapter DC12V/AC 24V. You can select according to your actual
environments. Please note system cannot support these two types of power
supplying at the same time.
Assistant
Function
Log function
Support system resource information and running status real-time display.
2
Day/Night mode auto switch.
Built-in IR light. Support IR night vision.
Support picture parameter setup such as electronic shutter and gain setup.
Support 3D NR.
Backlight compensation: screen auto split to realize backlight compensation to
adjust the bright.
Support video watermark function to avoid vicious video modification.
The enclosure conforms to the IP 66 protection. Has the waterproof function.
1.3 Specifications
1.3.1 Performance
Please refer to the following sheet for network camera performance specification.
Model
Parameter
IPC-HFW5100C
IPC-HFW5200C
System
Main Processor
High performance DSP
OS
Embedded LINUX
System
Resources
Support real-time network, local record, and remote operation at the same
time.
User Interface
Remote operation interface such as WEB, DSS, PSS
System Status
Micro SD card status, bit stream statistics, log, and software version.
Video Parameter
Image Sensor
1/3.0-inch CMOS
1/2.8-inch CMOS
Pixel
1280(H)×960(V)
1920(H) ×1080(V)
Day/Night Mode
Support day/night mode switch and IR-CUT at the same time. (The lens
has built-in IR-CUT mechanical component.).
Auto Aperture
Enable
Gain Control
Fixed/Auto
White Balance
Manual/Auto
BLC
Off/BLC(default or custom)/WDR (0-100 adjustable)/HLC(0-100
adjustable)
Exposure Mode
Manual/Auto
It ranges from 1/3 to 1/100000
Video
Compression
Standard
H.264/ H.264H/MJPEG
Video Frame
Rate
PAL:
Main stream
(1.3M@25fps, 720P@25fps )
Extra stream
(D1@25fps, CIF@25fps)
PAL:
Main stream
(1080P@25fps)
Extra stream
(D1@25fps, CIF@25fps)
NTSC：
Main stream
(1.3M@30fps, 720P@30fps )
Extra stream
(D1@30fps, CIF@30fps)
NTSC：
Main stream
(1080P@30fps)
Extra stream
(D1@30fps, CIF@30fps)
Video Bit Rate
H.264：32～8192Kb/s adjustable；
MJPEG：32～12288Kb/s
adjustable；
Bit stream adjustable, may
customize
H.264：32～8192Kb/s adjustable；
；MJPEG：32～16384Kb/s
adjustable；
Bit stream adjustable, may
customize
Video Flip
Support mirror.
Support flip function.
Snapshot
Max 1f/s snapshot. File extension name is JPEG.
Loading...