Dahua IPC-HDB3202,IPC-HDBW3202, IPC-HDB3101,IPC-HDBW3101 User Manual

HD (IR) Vandal Proof Network Dome Camera User’s Manual
Version 1.0.1
i
Welcome
Thank you for purchasing our network camera!
This user’s manual is designed to be a reference tool for your system.
Please read the following safeguard and warnings carefully before you use this series product!
Please keep this user’s manual well for future reference!
ii
Important Safeguards and Warnings
1Electrical safety
All installation and operation here should conform to your local electrical safety codes.
The power shall conform to the requirement in the SELV (Safety Extra Low Voltage) and the Limited
power source is rated 12V DC or 24V AC in the IEC60950-1. Please note: Do not connect these two power supplying sources to the device at the same time; it may result in device damage!
We assume no liability or responsibility for all the fires or electrical shock caused by improper handling
or installation.
We are not liable for any problems caused by unauthorized modification or attempted repair.
2Transportation security
Heavy stress, violent vibration or water splash are not allowed during transportation, storage and
installation.
3Installation
Do not apply power to the camera before completing installation.
Please install the proper power cut-off device during the installation connection.
Always follow the instruction guide the manufacturer recommended.
4Qualified engineers needed
All the examination and repair work should be done by the qualified service engineers.
We are not liable for any problems caused by unauthorized modifications or attempted repair.
5Environment
This series network camera should be installed in a cool, dry place away from direct sunlight,
inflammable, explosive substances and etc.
Please keep it away from the electromagnetic radiation object and environment.
Please make sure the CCD (CMOS) component is out of the radiation of the laser beam device.
Otherwise it may result in CCD (CMOS) optical component damage.
Please keep the sound ventilation.
Do not allow the water and other liquid falling into the camera.
Thunder-proof device is recommended to be adopted to better prevent thunder.
The grounding holes of the product are recommended to be grounded to further enhance the reliability
of the camera.
6. Daily Maintenance
Please shut down the device and then unplug the power cable before you begin daily maintenance
work.
iii
Do not touch the CCD (CMOS) optic component. You can use the blower to clean the dust on the lens
surface.
Always use the dry soft cloth to clean the device. If there is too much dust, please use the water to
dilute the mild detergent first and then use it to clean the device. Finally use the dry cloth to clean the
device.
Please put the dustproof cap to protect the CCD (CMOS) component when you do not use the camera.
7. Accessories
Be sure to use all the accessories recommended by manufacturer.
Before installation, please open the package and check all the components are included.
Contact your local retailer ASAP if something is broken in your package.
Accessory Name Amount
Network Camera 1
Quick Start Guide 1
CD 1
Installation Accessories Bag 1
iv
Table of Contents
1 General Introduction ..................................................................................................................1
1.1 Overview........................................................................................................................1
1.2 Features.........................................................................................................................1
1.3 Specifications................................................................................................................2
1.3.1 Performance...........................................................................................................2
1.3.2 Factory Default Setup...........................................................................................3
2 Structure ....................................................................................................................................11
2.1 Dimensions..................................................................................................................11
2.2 Port Description ..........................................................................................................11
2.3 Bidirectional talk .........................................................................................................15
2.3.1 Device Connection ..............................................................................................15
2.3.2 Operation ..............................................................................................................15
2.4 Alarm Setup.................................................................................................................15
3 Installation .................................................................................................................................17
3.1 Device Installation Introduction ................................................................................17
3.2 Device Installation Steps...........................................................................................17
3.2.1 General Installation .............................................................................................17
3.2.2 Manual Zoom Lens Focus Operation...............................................................21
3.2.3 Side Cable Exit ....................................................................................................21
3.2.4 Cable Connection................................................................................................22
3.3 SD Installation.............................................................................................................23
4 Quick Configuration Tool.........................................................................................................24
4.1 Overview......................................................................................................................24
4.2 Operation .....................................................................................................................24
v
5 Web Operation..........................................................................................................................27
5.1 Network Connection...................................................................................................27
5.2 Login and Main Interface...........................................................................................27
6 FAQ ............................................................................................................................................30
Appendix Toxic or Hazardous Materials or Elements ...............................................................31
1
1 General Introduction
1.1 Overview
This series network camera integrates the traditional camera and network video technology. It adopts
audio and video data collection, transmission together. It can connect to the network directly without any
auxiliary device.
This series network camera uses standard H.264 video compression technology and G.711a audio
compression technology, which maximally guarantee the audio and video quality.
This series network camera enclosure has the strong resistance capacity, which can guarantee the
proper work performance under heavy strike. It supports real-time monitor and listening at the same time.
It supports analog video output and dual-way bidirectional talk.
It can be used alone or used in a network area. When it is used lonely, you can connect it to the network
and then use a network client-end. Due to its multiple functions and various uses, this series network
camera is widely used in many environments such office, bank, road monitor and etc.
1.2 Features
User
Management
z Different user rights for each group, one user belongs to one group. z The user right shall not exceed the group right.
Storage
Function
z Support central server backup function in accordance with your configuration and
setup in alarm or schedule setting
z Support record via Web and the recorded file are storage in the client-end PC. z Support built-in SD card. z Support local SD card hot swap, support short-time storage when encounter
disconnection.
Alarm
Function
z Real-time respond to external local alarm input and video detect as user pre-
defined activation setup and exert corresponding message in screen and audio prompt(allow user to pre-record audio file)
z Real-time video detect: motion detect, camera masking. z Can generate an alarm when network abnormal, SD card abnormal event
occurred.
Network
Monitor
z Network camera supports one-channel audio/video data transmit to network
terminal and then decode. Delay is within 270ms (network bandwidth support needed)
z Max supports 20 connections. z Adopt the following audio and video transmission protocol: HTTP, TCP, UDP,
MULTICAST, RTP/RTCP, RTSP and etc.
z Support web access, widely used in WAN.
Network
Management
z Realize network camera configuration and management via Ethernet. z Support device management via web or client-end. z Support various network protocols.
Peripheral
Equipment
z Support the on-off alarm device to alarm via the sound or the light.
Power
z External power adapter DC12V/AC 24V z Support PoE.
Assistant
Function
z Log function z Support PAL/NTSC
2
z Support system resource information and running status real-time display. z Day/Night mode auto switch (electromagnetic ICR switch).
z Built-in IR light. Support IR night vision (For HDBW Series only).
z Backlight compensation: screen auto split to realize backlight compensation to
adjust the bright.
z Support electronic shutter and gain setup. z Support video watermark function to avoid vicious video modification.
1.3 Specifications
1.3.1 Performance
Please refer to the following sheet for network camera performance specification.
Model Parameter
IPC-HDB/HDBW3202 Series IPC-HDB/HDBW3101 Series
Main Processor
TI Davinci high performance DSP
OS Embedded LINUX System
Resources
Support real-time network, local record, and remote operation at the same time.
User Interface Remote operation interface such as WEB, DSS, PSS
System
System Status SD card status, bit stream statistics, log, and software version. Image Sensor 1/3-inch CMOS Pixel
1920(H)*1080(V)
1280(H)*960(V)
Day/Night Mode
Support day/night mode switch and electromagnetic IR-CUT at the same time.
Auto Iris DC drive Gain Control Fixed/Auto
White Balance Manual/Auto BLC Manual/Auto
Electronic Shutter
Manual/Auto PAL: It ranges from 1/3 to 1/10000. NTSC: It ranges from 1/4 to 1/10000.
Motorized Focus
Support remote motorized focus function.
Video Compression Standard
H264/JPEG/MJPEG
Video Frame Rate
PAL: Main stream(1920*1080@25fps) extra stream(704*576@25fps) NTSC: Main stream(1920*1080@30fps) extra stream704×480@30fps
PAL: Main stream(1280*960@25fps) Extra stream(704*576@25fps) Main stream(1280*720@25fps) extra stream(704*576@25fps) NTSC: Main stream(1280*960@30fps) extra stream704×480@30fps Main stream(1280*720@30fps) extra stream704×480@30fps
Video Bit Rate
H.264: 56Kbps-8192Kbps. It is adjustable JPEG: 128Kbps-0480Kbps. It is adjustable and bit rate is adjustable. Support customized setup.
Video Parameter
Video Flip
Support mirror. Support flip function.
3
Snapshot Max 1f/s snapshot. File extension name is JPEG. Privacy Mask Supports max 4 privacy mask zones Video Setup Support parameter setup such as bright, contrast.
Video Information
Channel title, time title, motion detect, privacy mask.
Lens
3~9mm@F1.2 motorized zoom focus lens
2.8~12mm@F1.4
Lens Interface ¢14. Lens is the default accessories. Audio Input 1-channe Audio Output 1-channel
Bidirectional Talk Input
Reuse the first audio input channel
Audio Bit Rate 16kbps 16bit
Audio
Audio Compression Standard
G.711a/G.711u/PCM
Motion Detect
396 (18*22) detection zonessensitivity level ranges from 1 to 6 (The 6th level has the highest sensitivity) Activation event, alarm device, audio/video storage, image snapshot, log, email function and etc.
Video
Video Loss
Activation event, alarm device, audio/video storage, image snapshot, log, email function and etc.
Alarm Input
1-channel input1-channel output
Record Priority
Manual>External alarm >Video detect>Schedule
Record
and
Backup
Local Storage Support Micro SD card storage Wire Network 1-channel wire Ethernet port, 10/100 Base-T Ethernet
Network Protocol
HTTP,TCP,ARP,RTSP,RTP,UDP,RTCP,SMTP,FTP,DHCP,DNS,DDNS,PP POE,IPv4/v6,SNMP,QoS,UPnP,NTP.
Network
Remote Operation
Monitor, system setup, log information, maintenance , upgrade and etc
Video Output
1-channel analog video outputBNC port, 9-pin port connection
Reset Built-in RESET button
AUX
Interface
IR light IR distance 10 to 20 meters (For HDBW series product only) Power Support AC24V/DC12V power. PoE
Power Consumption
General series: below 5W. IR series: below 7W.
General series: below 3W. IR series: below 5W.
Working Temperature
-10~+60
Working Humidify
10%~90%
Dimensions(m m)
¢151x119
Weight 1.25Kg
General Parameter
Installation Support various installation modes
1.3.2 Factory Default Setup
Please refer to the following sheet for factory default setup information.
4
Default setup Function Setup Type
Item
IPC-
HDB/HDBW320
2 Series
IPC­HDB/HDBW31 01 Series
Brightness 50
Contrast 50
Hue 50
Saturation 50
Gain mode Auto
Gain limit 80
Exposure mode Auto
Auto iris Enable
Scene mode Auto
Day/night mode Auto
BLC Off
Conditions
Flip Disable
Bit stream type
General
Encode mode
H.264B
Resolution
1080P
1920*1080
720P (1280*720)
Frame rate
FPS
PAL: 25
NTSC:30
Bit stream type
CBR
Reference bit rate
3584-8192 Kb/S
Bit rate 8192
I frame interval
50
Watermark settings
Enable
Main stream
Watermark character
DigitalCCTV
Enable Enable
Bit stream type
General
Encode mode
H.264B
Resolution
CIF(352×288/35
2×240)
CIF(352×288/3 52×240)
Frame rate
FPS
PAL: 25
NTSC:30
Bit rate type CBR
Camera Setup
Video
Video bit stream
Extra stream
Reference bit rate
192-1024Kb/S
5
Default setup Function Setup Type
Item
IPC-
HDB/HDBW320
2 Series
IPC­HDB/HDBW31 01 Series
Bit rate 640
I frame interval
50
Snap type General snap
Image size
1080P
1920*1080
720P (1280*720)
Quality Better
Snapshot
Interval 7s
Privacy mask Enable
Channel title Enable
Overlay
Time title Enable
Snapshot path
C:\PictureDownload
Path
Record path C:\RecordDownload
Enable Enable
Main stream
Encode mode
G.711A
Enable Disable
Audio
Sub(Extra) stream
Encode mode
G.711A
Host name IPC
Ethernet card Wire(Default)
Mode Static
MAC address
Depends on the device
IP version IPV4
IP address 192.168.1.168
Subnet mask 255.255.255.0
Default gateway
192.168.1.1
Preferred DNS
8.8.8.8
Alternate DNS
8.8.8.8
TCP/IP
Enable ARP/Pingto to set IP address service
Enable
Max connection
10
TCP port 37777
Network setup
Connection
UDP port 37778
6
Default setup Function Setup Type
Item
IPC-
HDB/HDBW320
2 Series
IPC­HDB/HDBW31 01 Series
HTTP port 80
RTSP port 554
Enable Disable
User name N/A
PPPoE
Password N/A
Server type Disable CN99 DDNS
Server IP none
Port 80
Domain name
none
User name none
Password N/A
DDNS
Update period
5m
IP filter Trusted sites Disable
SMTP server none
Port 25
Anonymity Disable
User name anonymity
Password N/A
Sender none
Authenticatio n (Encrypt mode)
N/A
Title (Subject)
IPC Message
Main Receiver
N/A
Interval 0s
SMTPemail
Health email Disable ,interval=60m
UPnP Enable UPnP Disable
SNMP v1 Disable
SNMP v2 Disable
SNMP port 161
Read community
public
Write community
private
Trap address N/A
SNMP
Trap port 162
Bonjour
Enable
Enable
Loading...
+ 25 hidden pages